Packaging

Front panel:
The two green lamps indicate whether power is connected to the router and the modem accordingly. The other four lamps at the bottom are the lamps and buttons of the manual control.

Side panel with RJ45 plug and mains power switch:

Back side with 220VAC sockets. The 220VAC sockets are attached to the back side of the box using screws. The wires are going through a hole in the sockets assembly and the back side of the box. So no wires can be seen from the outside. The 8mm hole in the PCB is used in order to pass the wires through the PCB and connect them to the connector terminal (CN1).