brz-debian

Overview

This is brz-debian, a plugin for Breezy that allows you to build Debian packages from a Breezy compatible branch, like a Git repository or a Bazaar branch.

Note that there is a user manual available at /usr/share/doc/brz-debian/user_manual/index.html that gives more information than this file.

Installation

This plugin requires python-debian and Breezy.

It also requires the dpkg-dev package to be installed (for the dpkg-mergechangelogs tool):

apt install dpkg-dev

This plugin can be installed in two ways. As you are probably using a Debian system you can probably just use the Debian packages. The other way is to branch it in to ~/.breezy/plugins/debian, i.e:

brz branch https://code.breezy-vcs.org/breezy-debian/trunk/ \
  ~/.config/breezy/plugins/debian

This will give you a brz builddeb command (alias bd).

Help for this plugin can be found by running brz help builddeb.

There is also a script named brz-buildpackage provided in /usr/bin that provides access to the tool as well. It is just a wrapper script that calls brz builddeb with the arguments you provide, so the rest of the documentation applies equally well to using this script. Probably the only difference is that help will be got with brz-buildpackage ---help (as brz builddeb --help also works and does the same as brz help builddeb). The script is provided for two reasons, the first is similarity to the other -buildpackage systems, and the second is so that the Debian package can provide the brz-buildpackage package, and so make it easier for people to find the package.

Configuration

There are also configuration files that can be used, these are, in the order that values will be used if found:

* .bzr-builddeb/local.conf (in the package directory)
* ~/.bazaar/builddeb.conf
* .bzr-builddeb/default.conf (in the package directory)

The last of these should be used for values that will be used by all users of the package, for instance 'merge = True'. The others are for the user to add or override settings that are specific to them, either globally or per package.

There is one complication to this however. As arbitrary commands can be specified for some of the options there is a potential security hole. This is closed by only taking these options from the configuration file in your home directory, which can't be changed by another committer to the branch. I apologise if this breaks your setup, and if you can't work around it please talk to me to try to find an approach that satisfies you and does not open any security holes.

These files must start with:

[BUILDDEB]

Configuration Options

The following options are read from the configuration files. Most can also be used as command line arguments by prepending -- to the names and not using the \= symbol. There are a few exceptions to this that are noted in the descriptions.

Directories

These change the directories that the plugin uses for various things.

• build-dir = path

  The directory in which the build takes place. (Defaults to ../build-area relative to the branch).

• result-dir = path

  The directory the resulting files will be placed in. (Defaults to ..)

• orig-dir = path

  The directory to search for the .orig.tar.gz when not in native mode. (Defaults to .. relative to the branch).

Modes

These change the way in which the plugin operates. They can be set depending on the type of package you are building.

• merge = True

  Turns on merge mode. This is where only the debian/ directory is versioned. It uses and orig.tar.gz for the upstream and combines the two before building. It works with both the debian/ directory in the branch, or the contents of debian/ (e.g. rules, control) directly in the top level directory of the branch. (Defaults to False).

• native = True

  If you want to build a native package from a branch then turn on this option. It will stop the plugin from looking for an orig.tar.gz and build a native package instead. This has no effect if merge mode is on, as I don't think it makes any sense to version the debian/ separately for a native package. If you disagree let me know.

• split = True

  This takes a package from a branch that includes both the upstream source and the debian/ dir and creates a non-native package from it by creating an orig.tar.gz from the code outside of debian/. This is probably most useful if you are bot upstream and Debian maintainer of a non-native package. This has no effect if merge or native are true, the former is for use when you don't version the full source, the second for when you don't need an orig.tar.gz so they make no sense to be used together.

• export-upstream = path

  This option takes a path (remote or local) to a brz branch that contains the upstream code. If this is set then the plugin will export the code from that branch to create the .orig.tar.gz. This option only has any effect if merge is set.

• export-upstream-revision = revision

  This sets the revision that the upstream code will be branched at. It takes the same revision spec as the normal --revision parameter. Use it to associate an upstream version number with a particular revision of the upstream code. This has no effect if export-upstream is not set.

Builders

These configure the commands that are used to build the package in different situations.

• builder = command

  The command to use to build the package. Defaults to debuild). Will only be read from the file in your home directory.

• quick-builder = command

  The command used to build the package if the --quick option is used. (Defaults to fakeroot debian/rules binary). Will only be read from the file in your home directory.

The idea is that certain options can be set in .bzr-builddeb/default.conf that apply to the package on all systems, or that there is a default that is wanted that differs from the default provided. merge = True is a perfect example of this.

Then the user can override this locally if they want for all of their packages (they prefer builder = pdebuild), so they can set this in ~/.bazaar/builddeb.conf. They can override it for the package if they want (e.g. they have a different location for upstream tarballs of a package if they are involved with upstream as well, so they set orig_dir = /home/.../releases/), this can be done in .bzr-builddeb/local.conf).

Creating a package

Below are instructions for creating a package. These instructions differ depending on whether you want to use merge mode or not.

First the common start create a directory to hold your work. This is not absolutely necessary, but as you still get all the power of brz when using this plugin, so you might want to branch etc. and so this will be useful later on:

$ mkdir path/to/project

If you are going to be using branches then the following is a good optimisation you can use:

$ brz init-repo --trees path/to/project

Now create your global config file if you want to change something like the builder in use, or have a global result directory or similar:

$ echo "[BUILDDEB]" > ~/.bazaar/builddeb.conf
$ $EDITOR ~/.bazaar/builddeb.conf

and any options that you want.

I will describe creating a new project, but for existing projects you can copy the code over and call brz init then continue in the same way.

I will also describe the setup that conforms to the default options for directories. If you wish to use a different layout set up the options to your liking and tweak the commands below as necessary.

Using merge mode

Merge mode is when only the debian/ directory of the package is versioned, with the upstream version of the code living elsewhere. It allows for clear separation of the Debian specific changes from the upstream code.

First copy the .orig.tar.gz file for the current version in to the parent directory. If you do not have the upstream tarball for the current version, but you do have a watch file detailing where it can be found then the plugin will automatically retrieve the tarballs as they are needed.

Now create the branch for the debian/ directory:

$ brz init project

Now you can either create a project/debian/ directory for all the files, or add them in the project directory.

Now tell bzr-builddeb that this is a merge mode project:

$ cd project/
$ mkdir .bzr-builddeb/
$ echo -e "[BUILDDEB]\nmerge = True" > .bzr-builddeb/default.conf

Now you are ready to create the project. Create the usual files, and edit them to your satisfaction. When you have the files run:

$ brz add
$ brz ci

from the root of the project branch.

You are now ready to build the project. See below for instructions on doing this.

Non-merge mode

This is a little simpler to set up. Create the branch for the project:

$ cd path/to/project
$ brz init project

Now add all the project files to the branch, and add the to bzr:

$ cd project
$ brz add
$ brz ci

There are two options when you want to build a Debian package, whether it is a native package or not. Most packages are non-native so I will describe that first.

To create a non-native package you need an upstream tarball to build against. Set the orig-dir variable to the directory containing the tarball that you want to use and the plugin will pick it up and you will have a non-native package. If you do not have the upstream tarball corresponding to the version of the package you are trying to build, but you have a watch file detailing where it can be found then it will be automatically retrieved when needed.

However sometimes you might be upstream of a package as well as Debian maintainer, but it is not a native package. In that case you may version the whole source including debian/, but not want to have to manually make a tarball without the debian/ directory. In that case see the split variable. If you set that then the plugin will create you an appropriately named orig.tar.gz of everything outside of debian/.

If you want to have a native package you don't need to worry about orig-dir, but instead set native = True in the .bzr-builddeb/default.conf file (make sure it starts with [BUILDDEB] if you create it).

Now you are ready to build using the plugin.

Building a Package

Once your package is set up then building it is easy. Run the following command from the top-level of the project branch, after checking in all changes:

$ brz bd

If you used the default options this should build the package and leave the resulting files in ../build-area.

Note that most of the options can be used as parameters to this command as well by prefixing their name with --. So you can do for example:

$ brz bd --builder pdebuild

to change from what is in the configuration files. Note that there is currently no way to set the binary options to false if they are set to true in the configuration files. It would be possible to allow this, but it would bloat the code and the help listings quite a lot, so I will only it if asked to.

Tips

If you have a slow builder defined in your configuration (for instance pdebuild, you can bypass this by using the --quick option. This uses whatever the quick_builder option is (defaults to fakeroot debian/rules binary).

If you are running in merge mode, and you have a large upstream tarball, and you do not want to unpack it at every build you can speed things up even more. This involves reusing the tarball each build, so saving the need to unpack it. To do this run:

$ brz bd --export-only

once to create a build-dir to use. (-e is the short option for this). Then on the next builds you can use the --reuse and --dont-purge options to keep using this build directory. N.B. This may cause build problems, especially if files are removed, it is advisable to run a build without --reuse after removing any files.

Workflow

brz-debian is designed to fit in with the workflow that brz encourages. It is designed as a plugin, so that it just becomes one more brz command that you run while working on the package.

It also works fine with the frequent branching approach of brz, so that you can branch to test something new for the package, or for a bug fix, and then merge it back in to your main branch when it is done.