Skip to content
/ split-ner Public

PyTorch code for paper, 'Split-NER: Named Entity Recognition via Two Question-Answering-based Classifications', ACL'23

Notifications You must be signed in to change notification settings

c3sr/split-ner

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

2 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

This repository has the source code and pretrained models for our work, Named Entity Recognition via Two Question-Answering-based Classifications published in ACL 2023.

Introduction

In this work, we address the NER problem by splitting it into two logical sub-tasks:

  1. Span Detection which simply extracts entity mention spans irrespective of entity type;
  2. Span Classification which classifies the spans into their entity types.

Further, we formulate both sub-tasks as question-answering (QA) problems and produce two leaner models which can be optimized separately for each sub-task. Experiments with four cross-domain datasets demonstrate that this two-step approach is both effective and time efficient. Our system, SplitNER outperforms baselines on OntoNotes5.0, WNUT17 and a cybersecurity dataset and gives on-par performance on BioNLP13CG. In all cases, it achieves a significant reduction in training time compared to its QA baseline counterpart. The effectiveness of our system stems from fine-tuning the BERT model twice, separately for span detection and classification.

Installation

pip install -r requirements.txt
pip install -e .

Execution

All model training / evaluations happen via run arguments specified in config (JSON) files. In this repo, we also provide a small dummy dataset on which users can train and evaluate our model variants and baselines easily. Any new dataset should be formatted and used in the same way.

The dummy data is actually a small randomly sampled set of sentences from WNUT17 corpus website and is just being used for illustration. As mentioned eariler, this should help the reader get the code up and runing, understand input/output data format and configure different train/eval scripts.

Dataset Citation:

Leon Derczynski, Eric Nichols, Marieke van Erp, Nut Limsopatham (2017) "Results of the WNUT2017 Shared Task on Novel and Emerging Entity Recognition", in Proceedings of the 3rd Workshop on Noisy, User-generated Text.

Experimental Setup

  • Every model has a model_name which is a unique identifier for the model architecture
  • Every dataset should come as a separate dataset_dir under the data directory with all required files (see example dummy dataset dir)
  • All model training experiments happen under the experiment_dir which by default is out
  • To ensure replication of results, we make PyTorch environment deterministic with a seed specified in the config
  • One may run many experiments with different seeds and then take average. Every such run is maintained separately by a run_dir
  • When a model_name is trained on a dataset_dir in a specific run setting identified by run_dir, model checkpoints are created under <repo root>/out/<dataset_dir>/<model_name>/<run_dir>
  • This above directory has checkpoints sub-directory which maintains PyTorch checkpoint snapshots for 2 models by default (latest and best so far).
  • It also has a predictions folder where outputs from the model when run in eval mode on train, dev or test sets is saved
  • We have 3 different high-level model training scripts:
    • main.py: trains using Sequence Tagging setup
    • main_qa.py: training using a Question-Answering setup
    • main_span.py: trains Span Classification model in Question-Answering setup
  • For all major model variants and baselines, we specify train/eval configs ready to run on dummy dataset under the config/dummy directory
  • All codes reside in the <repo root>/splitner directory which is configured as a python package (pip installable)
  • For training a SplitNER model, we train two models independently:
    • Span Detector (spandetect)
    • Span Classifier using Dice Loss (spanclass-dice)
  • After training both models, we generate output predictions from spandetect model and feed them as inputs to a trained spanclass-dice model to generate final output predictions

More details are provided in specific sections as detailed below.

Training

The training script:

  • Runs training for specified number of epochs
  • Keeps logging training progress, best F1 metrics so far among other things
  • Keeps evaluating on dev set after specified step interval and reports the F1 metrics
  • At any given point of time, makes sure to save both best and latest checkpoints

Whenever training a model, make sure to set in its config file:

{
"do_train": true,
"resume": null,
}

For resuming training from the latest checkpoint, find the last saved checkpoint from the checkpoint dir (default path: out/dummy/<model name>/<run name>/checkpoints). Say last checkpoint was checkpoint-4840, then update in config:

{
 "resume": "4840",
}

Evaluation

The training script itself, when run in eval mode:

  • Reports the F1 metrics (token-level) for specified model checkpoint on test set
  • Saves model predictions for train/dev/test sets under out/dummy/<model name>/<run name>/predictions, by default

Whenever evaluating a model on saved checkpoint (say, 4840), make sure to set in its config file:

{
 "do_train": false,
 "resume": "4840",
}

Mention-Level Metrics

The following script takes the output predictions from the model and calculates mention-level metrics (most importantly Micro-F1 Score) as is most commonly reported in literature. If output predictions are in file <repo root>/out/dummy/<model name>/<run name>/predictions/test.tsv then,

python analysis.py --experiment_dir out --dataset dummy --model <model name> --run_dir <run name> --file test

For getting metrics for span detection only, add flag --span_based. Example, for spandetect model:

python analysis.py --experiment_dir out --dataset dummy --model spandetect --run_dir <run name> --file test --span_based

Run Commands

Move to the working directory

cd splitner

Span Detection Module

Make sure config file has "detect_spans": true. Example run command:

CUDA_VISIBLE_DEVICES=0,1 python main_qa.py ../config/dummy/spandetect.json

Span Classification Module

This uses Dice Loss, hence the name of the corresponding config script.

CUDA_VISIBLE_DEVICES=0,1 python main_span.py ../config/dummy/spanclass-dice.json

SplitNER Pipeline

Once the above models are individually trained and evaluated, copy test.tsv from predictions folder of Span Detector into predictions folder for Span Classification model. Rename this file as say, infer_inp.tsv. Specify this file name in the config for span classifier (as shown below). Specify an output file path say, infer.tsv.

"infer_inp_path": "infer_inp.tsv",
"infer_out_path": "infer.tsv",

Run evaluation once again.

CUDA_VISIBLE_DEVICES=0,1 python main_span.py ../config/dummy/spanclass-dice.json

The final outputs whill be in file infer.tsv under the predictions folder of Span Classification model. To get the mention-level F1-score metrics over your outputs, run:

python analysis.py --experiment_dir out --dataset dummy --model spanclass-dice --run_dir <run name> --file infer

Baselines

Single-QA

CUDA_VISIBLE_DEVICES=0,1 python main_qa.py ../config/dummy/single-qa.json

Single-SeqTagging

CUDA_VISIBLE_DEVICES=0,1 python main.py ../config/dummy/single-seqtag.json

Ablations

Span Detection Module using Sequence Tagging Setup

CUDA_VISIBLE_DEVICES=0,1 python main_qa.py ../config/dummy/spandetect-seqtag.json

Span Detection Module with No Character Pattern Features

CUDA_VISIBLE_DEVICES=0,1 python main_qa.py ../config/dummy/spandetect-nocharpattern.json

Span Classification Module with Cross Entropy Loss

CUDA_VISIBLE_DEVICES=0,1 python main_span.py ../config/dummy/spanclass-crossentropy.json

Reproducing Results

Experiments are performed on 4 datsets: BioNLP13CG, CyberThreats, OntoNotes5.0, WNUT17. Config files are similar to the ones for dummy dataset with the below differences.

Max Sequence Length

  • Set "max_seq_len": 512 for OntoNotes5.0
  • Set "max_seq_len": 256 for other datasets

Base Model

  • Set "base_model": "bert-base-uncased" for WNUT17 and CyberThreats
  • Set "base_model": "allenai/scibert_scivocab_uncased" for BIONLP13CG
  • Set "base_model": "roberta-base" and "model_mode": "roberta_std" for OntoNotes5.0

Pretrained Models

We also provide pretrained model checkpoints for all our model variants and baselines. Checkpoints are provided for all the publicly available datasets used in our study. Checkpoints are hosted on HuggingFace Hub under the Split-NER classroom. To use a pretrained checkpoint, make sure to update the following fields in the config:

{
 "do_train": false,
 "resume": null,
 "base_model": "<pretrained checkpoint name>",
}

The following table lists our pre-trained model checkpoint names:

Model Dataset Pre-trained Checkpoint Name
Span Detection (QA) BioNLP13CG splitner/spandetect-qa-bionlp13cg
OntoNotes5.0 splitner/spandetect-qa-ontonotes
WNUT17 splitner/spandetect-qa-wnut17
Span Classification (Dice Loss) BioNLP13CG splitner/spanclass-qa-dice-bionlp13cg
OntoNotes5.0 splitner/spanclass-qa-dice-ontonotes
WNUT17 splitner/spanclass-qa-dice-wnut17
Span Detection Model
(Sequence Tagging)
BioNLP13CG splitner/spandetect-seqtag-bionlp13cg
OntoNotes5.0 splitner/spandetect-seqtag-ontonotes
WNUT17 splitner/spandetect-seqtag-wnut17
Span Detection
(QA - No Char Pattern)
BioNLP13CG splitner/spandetect-qa-nocharpattern-bionlp13cg
OntoNotes5.0 splitner/spandetect-qa-nocharpattern-ontonotes
WNUT17 splitner/spandetect-qa-nocharpattern-wnut17
Span Classification
(Cross-Entropy Loss)
BioNLP13CG splitner/spanclass-qa-crossentropy-bionlp13cg
OntoNotes5.0 splitner/spanclass-qa-crossentropy-ontonotes
WNUT17 splitner/spanclass-qa-crossentropy-wnut17
Single NER Model
(Sequence Tagging)
BioNLP13CG splitner/single-seqtag-bionlp13cg
OntoNotes5.0 splitner/single-seqtag-ontonotes
WNUT17 splitner/single-seqtag-wnut17
Single NER Model
(Question-Answering)
BioNLP13CG splitner/single-qa-bionlp13cg
OntoNotes5.0 splitner/single-qa-ontonotes
WNUT17 splitner/single-qa-wnut17

Other ablations are only performed on the BioNLP13CG dataset and are listed below.

Char / Pattern Feature Ablation

Model Name Pretrained Checkpoint Name
Span Detection (no Char / Pattern features) splitner/spandetect-qa-nocharpattern-bionlp13cg
Span Detection (Char features only) splitner/spandetect-qa-charonly-bionlp13cg
Span Detection (Pattern features only) splitner/spandetect-qa-patonly-bionlp13cg
Span Detection (Char + Pattern features) splitner/spandetect-qa-bionlp13cg
Span Detection (Char + Pattern + POS features) splitner/spandetect-qa-pos-bionlp13cg

Query Type Ablation

For ease of nomenclature we define query types as mentioned below.

Query Type Description
Q1 Extract important entity spans from the following text.
Q2 Where is the entity mentioned in the text?
Q3 Find named entities in the following text.
Q4 < empty >

For the query types, the pre-trained model checkpoint names as as under:

Model Name Pretrained Checkpoint Name
Span Detection (Q1) splitner/spandetect-qa-extract-bionlp13cg
Span Detection (Q2) splitner/spandetect-qa-where-bionlp13cg
Span Detection (Q3) splitner/spandetect-qa-find-bionlp13cg
Span Detection (Q4) splitner/spandetect-qa-empty-bionlp13cg

Additional Resources

We also have a video presentation of our work from ACL 2023 conference and some slides / poster. Do check them out in the resources directory!

Citation

We hope you like our work. 😊 Please do cite us when you reference Split-NER:

@inproceedings{arora2023split,
  title={Split-NER: Named Entity Recognition via Two Question-Answering-based Classifications},
  author={Arora, Jatin and Park, Youngja},
  booktitle={Proceedings of the 61st Annual Meeting of the Association for Computational Linguistics (Volume 2: Short Papers)},
  pages={416--426},
  year={2023}
}

Correspondence

For any follow-ups, please don't hesitate in reaching out to us over e-mail!

Jatin Arora <[email protected]>
Youngja Park <[email protected]>

Acknowledgements

This work was conducted under the IBM-Illinois Center for Cognitive Computing Systems Research (C3SR), while the first author was an intern at IBM and a graduate student at University of Illinois Urbana-Champaign advised by Prof. Jiawei Han. We are very grateful to him for his continued guidance, support and valuable feedback throughout this work.


                              Â