Intel® Trust Domain Extensions (TDX) on Ubuntu 24.04

Table of Contents:

• 1. Introduction
• 2. Report an Issue
• 3. Supported Hardware
• 4. Setup Host OS
• 5. Create TD Image
• 6. Boot TD
• 7. Verify TD
• 8. Setup Remote Attestation on Host OS and Inside TD
• 9. Perform Remote Attestation Using Intel Tiber Trust Services CLI
• 10. Build Packages From Source
• 11. Build Kernel From Source
• 12. Run Tests

1. Introduction

Intel® TDX is a Confidential Computing technology which deploys hardware-isolated, Virtual Machines (VMs) called Trust Domains (TDs). It protects TDs from a broad range of software attacks by isolating them from the Virtual-Machine Manager (VMM), hypervisor, and other non-TD software on the host platform. As a result, Intel TDX enhances a platform user’s control of data security and IP protection. Also, it enhances the Cloud Service Providers’ (CSP) ability to provide managed cloud services without exposing tenant data to adversaries. For more information, see the Intel TDX overview.

This tech preview of Intel TDX on Ubuntu 24.04 provides base host OS, guest OS, and remote attestation functionalities. Follow these instructions to setup the Intel TDX host, create a TD, boot the TD, and attest the integrity of the TD's execution environment.

The host OS and TD setup can be cutomized by editing the global configuration file: setup-tdx-config.

2. Report an Issue

Please submit issues here and we'll get back to you ASAP.

To help us with the debugging process, run the system-report.sh tool and attach the report.

3. Supported Hardware

This release works with these Intel® Xeon® Processors:

• 4th Gen Intel® Xeon® Scalable Processors (select SKUs with Intel® TDX)
• 5th Gen Intel® Xeon® Scalable Processors
• Intel® Xeon® 6 Processors with P-Cores

4. Setup Host OS

In this section, you will install a generic Ubuntu 24.04 server image, install necessary packages to turn the host OS into an Intel TDX-enabled host OS, optionally install remote attestation components, and enable Intel TDX settings in the BIOS.

4.1 Install Ubuntu 24.04 Server Image

Download and install Ubuntu 24.04 server on the host machine.

4.2 Enable Intel TDX in Host OS

1. Download this repository by downloading an asset file from the releases page on GitHub or by cloning the repository (at the appropriate tag/branch).

   For example:

   git clone -b noble-24.04 https://github.com/canonical/tdx.git

2. Customize the setup of the host and TD by editing the configuration file setup-tdx-config.
   By default, remote attestation components are not installed on the host and inside the TD.
   You can chose to automatically install remote attestation packages provided by Canonical by setting TDX_SETUP_ATTESTATION=1.
   In this case, you can skip step 8.2.1 and step 8.3.3.

3. Run the setup-tdx-host.sh script.

   NOTE: If you're behind a proxy, use sudo -E to preserve user environment.

   cd tdx
   sudo ./setup-tdx-host.sh

4. Reboot.

4.3 Enable Intel TDX in the Host's BIOS

1. Go into the host's BIOS.

   NOTE: The following is a sample BIOS configuration. The necessary BIOS settings or the menus might differ based on the platform that is used. Please reach out to your OEM/ODM or independent BIOS vendor for instructions dedicated for your BIOS.

2. Go to Socket Configuration > Processor Configuration > TME, TME-MT, TDX.

   • Set Memory Encryption (TME) to Enable
   • Set Total Memory Encryption Bypass to Enable (Optional setting for best host OS and regular VM performance.)
   • Set Total Memory Encryption Multi-Tenant (TME-MT) to Enable
   • Set TME-MT memory integrity to Disable
   • Set Trust Domain Extension (TDX) to Enable
   • Set TDX Secure Arbitration Mode Loader (SEAM Loader) to Enable. (NOTE: This allows loading Intel TDX Loader and Intel TDX Module from the ESP or BIOS.)
   • Set TME-MT/TDX key split to a non-zero value

3. Go to Socket Configuration > Processor Configuration > Software Guard Extension (SGX).

   • Set SW Guard Extensions (SGX) to Enable

4. Save the BIOS settings and boot up.

4.4 Verify Intel TDX is Enabled on Host OS

Verify that Intel TDX is enabled using the dmesg command:

sudo dmesg | grep -i tdx

The message virt/tdx: module initialized proves that Intel TDX has initialized properly. Here is an example output:

...
[    5.205693] virt/tdx: BIOS enabled: private KeyID range [64, 128)
[   29.884504] virt/tdx: 1050644 KB allocated for PAMT
[   29.884513] virt/tdx: module initialized
...

5. Create TD Image

In this section, you will create an Ubuntu 24.04-based TD image from scratch or convert an existing VM image into a TD image. This can be performed on any Ubuntu 22.04 or newer system - an Intel TDX-specific environment is not required.

• The base image is an Ubuntu 24.04 cloud image.
• By default, the Ubuntu generic kernel is used for the TD guest. The -intel kernel, which may have non-upstreamed and/or under-development features, can be selected by setting the variable TDX_SETUP_INTEL_KERNEL=1 in the setup-tdx-config configuration file.

5.1 Create a New TD Image

A TD image can be generated with the following commands. The resulting image will be based on an Ubuntu 24.04 cloud image (ubuntu-24.04-server-cloudimg-amd64.img), the default root password is 123456, and other default settings are used. Please note the most important options described after the commands and have a look at the create-td-image.sh script for more available options.

cd tdx/guest-tools/image/
sudo ./create-td-image.sh

Important options for TD image creation:

• If you're behind a proxy, use sudo -E to preserve user environment.

• To adjust the base image, set the following two environment variables before running the script:

  export OFFICIAL_UBUNTU_IMAGE="https://cloud-images.ubuntu.com/noble/current/"
  export CLOUD_IMG="noble-server-cloudimg-amd64.img"

• The used kernel type (generic or intel) will be reflected in the name of the resulting image so it is easy to distinguish.

5.2 Convert a Regular VM Image into a TD Image

If you have an existing Ubuntu 24.04 VM image, you can enable the Intel TDX feature using the following steps:

1. Boot up your guest, i.e., your regular VM.

2. Download this repository by downloading an asset file from the releases page on GitHub or by cloning the repository (at the appropriate tag/branch).

3. Run the following script.

   cd tdx
   sudo ./setup-tdx-guest.sh

4. Shutdown the guest.

6. Boot TD

Now that you have a TD image, let’s boot it using one of the following two ways:

• Boot using QEMU
• Boot using virsh

NOTE: The script provided for the virsh method supports running multiple TDs simultaneously. The script provided for the QEMU method supports running only a single instance.

6.1 Boot TD with QEMU

Boot TD with the provided script. By default, the script will use an image with a generic kernel located at ./image/tdx-guest-ubuntu-24.04-generic.qcow2. A different qcow2 image (e.g., one with an intel kernel) can be used by setting the TD_IMG command-line variable.

NOTE: It is recommended that you run the script as a non-root user.

cd tdx/guest-tools
./run_td.sh

An example output:

TD, PID: 111924, SSH : ssh -p 10022 root@localhost

6.2 Boot TD with virsh (libvirt)

1. [Recommended] Configure libvirt to be usable as non-root user.

   1. Apply the following settings to the file /etc/libvirt/qemu.conf.

      user = <your_user_name>
      group = <your_group>
      dynamic_ownership = 0

   2. Restart the libvirtd service

      sudo systemctl restart libvirtd

2. Boot TD using the following commands.

   cd tdx/guest-tools
   ./tdvirsh new

   Details about tdvirsh:

   • To manage the lifecycle of TDs, we developed a wrapper around the virsh tool. This new tdvirsh tool extends virsh with new capabilities to create/remove TDs.

   • By default, tdvirsh will use an image located at ./image/tdx-guest-ubuntu-24.04-generic.qcow2 with the generic Ubuntu kernel. A different qcow2 image (e.g., one with an intel kernel) can be used by using the command-line option -i IMAGE_PATH.

   • By default, tdvirsh will use a XML libvirt template located at ./trust_domain.xml.template. A different XML libvirt template can be used by using the command-line option -t XML_PATH.

   • All VMs can be listed with the following command:

     ./tdvirsh list --all

     Example output:

     Id   Name                                                        State
     ---------------------------------------------------------------------------
     1    tdvirsh-trust_domain-f7210c2b-2657-4f30-adf3-639b573ea39f   running (ip:192.168.122.212, hostfwd:32855, cid:3)

     NOTE: 32855 in hostfwd:32855 is the port number a user can use to connect to the TD via ssh -p 32855 root@localhost. You can also connect to the guest using its IP address : ssh [email protected].

   • A TD can be removed with the following command:

     ./tdvirsh delete [domain]

   • All available options can be displayed with the following command:

     ./tdvirsh -h

6.3 Secure Boot TD

We provide a libvirt template (trust_domain-sb.xml.template) that shows how a TD can be booted with secure boot. As a result, you can easily boot a TD with secure boot enabled using the following commands:

cd tdx/guest-tools
./tdvirsh new -t trust_domain-sb.xml.template

7. Verify TD

1. Log into the TD using one of the following commands.

   NOTE: If you booted your TD with td_virsh_tool.sh, you will likely need a different port number from the one below. The tool will print the appropriate port to use after it has successfully booted the TD.

   • From localhost

   ssh -p 10022 root@localhost

   • From remote host

   ssh -p 10022 root@<host_ip>

2. Verify Intel TDX is enabled in the TD:

   dmesg | grep -i tdx

   An example output:

   [    0.000000] tdx: Guest detected
   [    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 2023.05-2+tdx1.0~ubuntu23.10.1 10/17/2023
   [    0.395218] process: using TDX aware idle routine
   [    0.395218] Memory Encryption Features active: Intel TDX

3. Verify quote generation provider:

   mkdir -p /sys/kernel/config/tsm/report/testreport0
   cat /sys/kernel/config/tsm/report/testreport0/provider

   Should give the following output:

   tdx_guest

8. Setup Remote Attestation on Host OS and Inside TD

Attestation is a process in which the attester requests the verifier (e.g., Intel Tiber Trust Services) to confirm that a TD is operating in a secure and trusted environment. This process involves the attester generating a "TD Quote", which contains measurements of the Trusted Execution Environment (TEE) and other cryptographic evidence. The TD Quote is sent to the verifier who then confirms its validity against reference values and policies. If confirmed, the verifier returns an attestation token. The attester can then send the token to a relying party who will validate it. For more on the basics of attestation, see Attestation overview.

8.1 Check Hardware Status

For attestation to work, you need Production hardware. Run the check-production.sh script to verify.

cd tdx/attestation
sudo ./check-production.sh

8.2 Setup Intel® SGX Data Center Attestation Primitives (Intel® SGX DCAP) on the Host OS

1. Install the required DCAP packages from Canonical's PPA on the host OS.

   NOTE 1: If you have already installed the attestation components as part of the host OS setup (see step 2 in section 4.2), you can continue with step 3.

   NOTE 2: If you're behind a proxy, use sudo -E to preserve user environment.

   cd tdx/attestation
   sudo ./setup-attestation-host.sh

2. Reboot the system.

3. Verify the Intel SGX devices belong to these groups and have proper permissions.

   NOTE: These devices are needed as Intel TDX's attestation flow is based on the Intel SGX attestation flow.

   ls -l /dev/sgx_*

   Expected result:

   crw-rw---- 1 root sgx     10, 125 Apr  3 21:14 /dev/sgx_enclave
   crw-rw---- 1 root sgx_prv 10, 126 Apr  3 21:14 /dev/sgx_provision
   crw-rw---- 1 root sgx     10, 124 Apr  3 21:14 /dev/sgx_vepc

4. Verify the QGS service is running properly:

   sudo systemctl status qgsd

5. Verify the PCCS service is running properly:

   sudo systemctl status pccs

6. To setup the PCCS in the next step, you need a subscription key for the Intel PCS.

   1. If you did not request such a subscription key before, subscribe to Intel PCS, which requires to log in (or create an account). Two subscription keys are generated (for key rotation) and both can be used for the following step.
   2. If you did request such a subscription key before, retrieve one of your keys, which requires to log in. You have two subscription keys (for key rotation) and both can be used for the following step.

7. Configure the PCCS service:

   sudo /usr/bin/pccs-configure

   An example configuration:

   Checking nodejs version ...
   nodejs is installed, continue...
   Checking cracklib-runtime ...
   Set HTTPS listening port [8081] (1024-65535) :
   Set the PCCS service to accept local connections only? [Y] (Y/N) :
   Set your Intel PCS API key (Press ENTER to skip) : <Enter your Intel PCS subscription key here>
   Choose caching fill method : [LAZY] (LAZY/OFFLINE/REQ) :
   Set PCCS server administrator password: <pccs-admin-password>
   Re-enter administrator password: <pccs-admin-password>
   Set PCCS server user password: <pccs-server-user-password>
   Re-enter user password: <pccs-server-user-password>
   Do you want to generate insecure HTTPS key and cert for PCCS service? [Y] (Y/N) :N

   NOTE 1: The resulting config file is located at /opt/intel/sgx-dcap-pccs/config/default.json.

   NOTE 2: If you're behind a proxy, add your proxy URL in the default.json file.

8. Restart the PCCS service:

   sudo systemctl restart pccs

9. Verify the PCCS service is running properly:

   sudo systemctl status pccs

10. Register the platform.

    NOTE: There are multiple alternatives to perform platform registration with different trade-offs and they are explained in detail in Intel's Intel TDX Enabling Guide. In the following, we focus on the the direct registration variant that uses the Multi-package Registration Agent (MPA). This agent is executed on system start up, registers the platform (if necessary), and gets deactivated. Please check the following two logs to confirm successful registration:

    1. Check the log of the MPA service:

       sudo systemctl status mpa_registration_tool

       Example output:

       mpa_registration_tool.service - Intel MPA Registration
       	Loaded: loaded (/usr/lib/systemd/system/mpa_registration_tool.service; enabled; preset: enabled)
       	Active: inactive (dead) since Tue 2024-04-09 22:54:50 UTC; 11h ago
       Duration: 46ms
       Main PID: 3409 (code=exited, status=0/SUCCESS)
       		CPU: 21ms
       
       Apr 09 22:54:50 right-glider-515046 systemd[1]: Started mpa_registration_tool.service - Intel MPA Registratio>
       Apr 09 22:54:50 right-glider-515046 systemd[1]: mpa_registration_tool.service: Deactivated successfully.

    2. Check the log file of the MPA:

       cat /var/log/mpa_registration.log

       An example output of successful registration:

       [04-06-2024 03:05:53] INFO: SGX Registration Agent version: 1.20.100.2
       [04-06-2024 03:05:53] INFO: Starts Registration Agent Flow.
       [04-06-2024 03:05:54] INFO: Registration Flow - PLATFORM_ESTABLISHMENT or TCB_RECOVERY passed successfully.
       [04-06-2024 03:05:54] INFO: Finished Registration Agent Flow.

    If an error is reported, re-do the registration from scratch with these steps:

    1. Remove the MPA log file: sudo rm /var/log/mpa_registration.log.
    2. Reboot.
    3. Go into the BIOS.
    4. Navigate to Socket Configuration > Processor Configuration > Software Guard Extension (SGX).
    5. Set these:
    • SGX Factory Reset to Enable
    • SGX Auto MP Registration to Enable

8.3 Setup Intel Tiber Trust Services CLI Inside TD

NOTE: If you have already installed the attestation components as part of the TD image creation, you proceed to step 4.

1. Boot a TD and connect to it.

2. Download this repository by downloading an asset file from the releases page on GitHub or by cloning the repository (at the appropriate tag/branch).

3. Install the Intel Tiber Trust Service CLI.

   cd tdx/attestation
   ./setup-attestation-guest.sh

4. Verify presence of Intel Tiber Trust Service CLI by printing its version.

   trustauthority-cli version

   An example output:

   Intel® Trust Authority CLI for TDX
   Version: 1.5.0-
   Build Date: 2024-07-08T09:53:15+00:00

9. Perform Remote Attestation Using Intel Tiber Trust Services CLI

1. Boot a TD and connect to it.

2. Inside the TD, generate a sample TD Quote to prove the Quote Generation Service is working properly.

   trustauthority-cli quote

   An example output of a successful quote generation:

       [4 0 2 0 129 0 0 0 0 0 0 0 147 154 114 51 247 156 76 169 148 10 13 179 149 127 6 7 153 37 33 
        114 143 8 198 185 144 222 132 242 244 129 151 76 0 0 0 0 5 1 2 0 0 0 0 0 0 0 0 0 0 0 0 0 28 
        198 161 122 183 153 233 166 147 250 199 83 107 230 28 18 238 30 15 171 173 168 45 12 153 15 
        8 204 238 42 168 109 231 123 8 112 245 88 197 112 231 255 229 93 109 71 250 4 0 0 0 0 0 0 0
        0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
        0 0 0 0 0 0 16 0 0 0 0 231 2 6 0 0 0 0 0 71 161 204 7 75 145 77 248 89 107 173 14 209 61 80
        213 97 173 30 255 199 247 204 83 10 184 109 167 234 73 255 192 62 87 231 218 130 159 140 18
        156 98 156 57 112 80 83 35 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
                                          ....
                                          ....
                                          ....
        15 43 88 111 53 111 47 115 88 54 79 57 81 87 120 72 82 65 118 90 85 71 79 100 82 81 55 99 
        118 113 82 88 97 113 73 61 10 45 45 45 45 45 69 78 68 32 67 69 82 84 73 70 73 67 65 84 69 
        45 45 45 45 45 10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
        0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
   

3. Attest with the Intel Tiber Trust Service.

   1. Subscribe to the Intel Tiber Trust Service free trial.

   2. Obtain an API key following this tutorial.

   3. Create a config.json file like the example below:

       {
       	"trustauthority_url": "https://portal.trustauthority.intel.com",
       	"trustauthority_api_url": "https://api.trustauthority.intel.com",
       	"trustauthority_api_key": "<Your Intel Tiber Trust Service API key>"
       }

   4. Use the Intel Tiber Trust Service CLI to generation an attestation token. Under the hood, the CLI will generate a TD Quote using the CPU, send the TD Quote to the external Intel Tiber Trust Service for TD Quote verification, and receive an attestation token on success.

       trustauthority-cli token -c config.json

      An example of a successful attestation token generation:

       2024/04/30 22:55:17 [DEBUG] GET https://api.trustauthority.intel.com/appraisal/v1/nonce
       2024/04/30 22:55:18 [DEBUG] POST https://api.trustauthority.intel.com/appraisal/v1/attest
       Trace Id: U5sA2GNVoAMEPkQ=
       eyJhbGciOiJQUzM4NCIsImprdSI6Imh0dHBzOi8vYW1iZXItdGVzdDEtdXNlcjEucHJvamVjdC1hbWJlci1zbWFzLmN
       .....
       .....
       .....
       DRctLIeN4MioXztymyK7qsT1p7n7Dh56-HmDQH47MVgrEL_S-wRYDQioEkUvtuA_3pGk
      

10. Build Packages from Source

Even though the Intel TDX components live in a separate PPA from the rest of the Ubuntu packages, they follow the Ubuntu standards and offer users the same facilities for code source access and building.

You can find generic instructions on how to build a package from source here: https://wiki.debian.org/BuildingTutorial. The core idea of building a package from source code is to be able to edit the source code (see https://wiki.debian.org/BuildingTutorial#Edit_the_source_code).

Here are example instructions for building QEMU (for normal user with sudo rights):

1. Install Ubuntu 24.04 (or use an existing Ubuntu 24.04 system).

2. Install build dependencies:

   sudo apt update
   sudo apt install --no-install-recommends --yes software-properties-common \
   		build-essential \
   		fakeroot \
   		devscripts \
   		wget \
   		git \
   		equivs \
   		liblz4-tool \
   		sudo \
   		unzip \
   		curl \
   		xz-utils \
   		cpio \
   		gawk

3. Download package's source:

   sudo apt install -y ubuntu-dev-tools
   pull-ppa-source --ppa ppa:kobuk-team/tdx-release qemu

   This command will create several files and a folder, the folder is the qemu source code.

4. Rebuild

   cd <qemu-source-code>
   sudo apt build-dep ./
   dpkg-buildpackage -us -uc -b

   The resulting debian packages are available in the parent folder.

5. Install the packages.

   For details, you can refer to https://wiki.debian.org/BuildingTutorial#Installing_and_testing_the_modified_package

11. Build Kernel from Source

1. Initialize a matching build environment.

   git clone https://kernel.ubuntu.com/gitea/kernel/kteam-tools.git
   sudo apt install schroot devscripts ubuntu-dev-tools
   # Some additional package might be installed in next step
   # A session restart might be required at next step to take permission changes into account
   kteam-tools/cranky/cranky chroot create-base "noble"
   kteam-tools/cranky/cranky chroot create-session noble:linux

2. Clone the kernel source.

   kteam-tools/cranky/cranky checkout noble:linux-intel

3. Build the kernel.

   cd <kernel repository>
   <path-to-kteam-tools>/cranky/cranky fdr clean binary

4. Install the kernel.

   Example of kernel installation:

   sudo dpkg -i ../linux-image-unsigned-6.8.0-1011-intel_6.8.0-1011.18_amd64.deb ../linux-modules-6.8.0-1011-intel_6.8.0-1011.18_amd64.deb

12. Run Tests

Please follow tests/README to run Intel TDX tests.