Bump kernel version to 6.5.9 #6
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This patch fixes the MTD device size calculation when there is no GPIO defined. The previous size calculation could return values lower than those defined on the 'reg' field of the Device Tree, raising 'attempt to access beyond end of device' errors during device access. Signed-off-by: Victor Fusco <[email protected]>
This allows bigger command lines.
Change pr_emerg to pr_notice so these messages can be silenced with a different loglevel
Example code to trigger this behavior
```
#include<stdio.h>
#include<unistd.h>
#include<syscall.h>
#include<linux/reboot.h>
int main(int argc, char *argv[]) {
const char *bail = argc > 1? argv[1] : "0";
printf("bail: %s\n", bail);
syscall(SYS_reboot, LINUX_REBOOT_MAGIC1, LINUX_REBOOT_MAGIC2, LINUX_REBOOT_CMD_RESTART2, bail);
}
```
Change pr_emerg to pr_notice so this message can be silenced with a different loglevel (same as poweroff and halt)
mpolitzer
approved these changes
Nov 7, 2023
| @@ -240,3 +240,5 @@ CONFIG_RCU_EQS_DEBUG=y | |||
| # CONFIG_FTRACE is not set | |||
| # CONFIG_RUNTIME_TESTING_MENU is not set | |||
| CONFIG_MEMTEST=y | |||
| CONFIG_EFI=y | |||
There was a problem hiding this comment.
I know this was done in an old commit.
But we should revert this change and have a separate cartesi_defconfig instead.
I'll add an issue for this.
There was a problem hiding this comment.
to clarify, do you want this PR to go w/o this change?
There was a problem hiding this comment.
The PR is good as is.
I think we can do this "revert" at a later moment.
edubart
approved these changes
Nov 17, 2023
| @@ -1038,6 +1038,16 @@ config CRYPTO_SHA3 | |||
| help | |||
| SHA-3 secure hash algorithms (FIPS 202, ISO/IEC 10118-3) | |||
|
|
|||
| config CRYPTO_KECCAK | |||
There was a problem hiding this comment.
We should also revert this after the new tools library changes.
There was a problem hiding this comment.
I'll do the revert here: #4
vfusco
pushed a commit
that referenced
this pull request
Mar 8, 2024
When scanning namespaces, it is possible to get valid data from the first call to nvme_identify_ns() in nvme_alloc_ns(), but not from the second call in nvme_update_ns_info_block(). In particular, if the NSID becomes inactive between the two commands, a storage device may return a buffer filled with zero as per 4.1.5.1. In this case, we can get a kernel crash due to a divide-by-zero in blk_stack_limits() because ns->lba_shift will be set to zero. PID: 326 TASK: ffff95fec3cd8000 CPU: 29 COMMAND: "kworker/u98:10" #0 [ffffad8f8702f9e0] machine_kexec at ffffffff91c76ec7 #1 [ffffad8f8702fa38] __crash_kexec at ffffffff91dea4fa #2 [ffffad8f8702faf8] crash_kexec at ffffffff91deb788 #3 [ffffad8f8702fb00] oops_end at ffffffff91c2e4bb #4 [ffffad8f8702fb20] do_trap at ffffffff91c2a4ce #5 [ffffad8f8702fb70] do_error_trap at ffffffff91c2a595 #6 [ffffad8f8702fbb0] exc_divide_error at ffffffff928506e6 #7 [ffffad8f8702fbd0] asm_exc_divide_error at ffffffff92a00926 [exception RIP: blk_stack_limits+434] RIP: ffffffff92191872 RSP: ffffad8f8702fc80 RFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff95efa0c91800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 RBP: 00000000ffffffff R8: ffff95fec7df35a8 R9: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff95fed33c09a8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffffad8f8702fce0] nvme_update_ns_info_block at ffffffffc06d3533 [nvme_core] #9 [ffffad8f8702fd18] nvme_scan_ns at ffffffffc06d6fa7 [nvme_core] This happened when the check for valid data was moved out of nvme_identify_ns() into one of the callers. Fix this by checking in both callers. Link: https://bugzilla.kernel.org/show_bug.cgi?id=218186 Fixes: 0dd6fff ("nvme: bring back auto-removal of deleted namespaces during sequential scan") Cc: [email protected] Signed-off-by: Ewan D. Milne <[email protected]> Signed-off-by: Keith Busch <[email protected]>
vfusco
pushed a commit
that referenced
this pull request
Mar 8, 2024
When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f #3 [fffffe0000549eb8] do_nmi at ffffffff81079582 #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] #10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb #13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 #14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 #15 [ffff88aa841efb88] device_del at ffffffff82179d23 #16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] #17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] #18 [ffff88aa841efde8] process_one_work at ffffffff811c589a #19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff #20 [ffff88aa841eff10] kthread at ffffffff811d87a0 #21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/[email protected] Suggested-by: "Ismail, Mustafa" <[email protected]> Signed-off-by: Shifeng Li <[email protected]> Reviewed-by: Shiraz Saleem <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
vfusco
pushed a commit
that referenced
this pull request
Mar 8, 2024
When working on LED support for r8169 I got the following lockdep warning. Easiest way to prevent this scenario seems to be to take the RTNL lock before the trigger_data lock in set_device_name(). ====================================================== WARNING: possible circular locking dependency detected 6.7.0-rc2-next-20231124+ #2 Not tainted ------------------------------------------------------ bash/383 is trying to acquire lock: ffff888103aa1c68 (&trigger_data->lock){+.+.}-{3:3}, at: netdev_trig_notify+0xec/0x190 [ledtrig_netdev] but task is already holding lock: ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (rtnl_mutex){+.+.}-{3:3}: __mutex_lock+0x9b/0xb50 mutex_lock_nested+0x16/0x20 rtnl_lock+0x12/0x20 set_device_name+0xa9/0x120 [ledtrig_netdev] netdev_trig_activate+0x1a1/0x230 [ledtrig_netdev] led_trigger_set+0x172/0x2c0 led_trigger_write+0xf1/0x140 sysfs_kf_bin_write+0x5d/0x80 kernfs_fop_write_iter+0x15d/0x210 vfs_write+0x1f0/0x510 ksys_write+0x6c/0xf0 __x64_sys_write+0x14/0x20 do_syscall_64+0x3f/0xf0 entry_SYSCALL_64_after_hwframe+0x6c/0x74 -> #0 (&trigger_data->lock){+.+.}-{3:3}: __lock_acquire+0x1459/0x25a0 lock_acquire+0xc8/0x2d0 __mutex_lock+0x9b/0xb50 mutex_lock_nested+0x16/0x20 netdev_trig_notify+0xec/0x190 [ledtrig_netdev] call_netdevice_register_net_notifiers+0x5a/0x100 register_netdevice_notifier+0x85/0x120 netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev] led_trigger_set+0x172/0x2c0 led_trigger_write+0xf1/0x140 sysfs_kf_bin_write+0x5d/0x80 kernfs_fop_write_iter+0x15d/0x210 vfs_write+0x1f0/0x510 ksys_write+0x6c/0xf0 __x64_sys_write+0x14/0x20 do_syscall_64+0x3f/0xf0 entry_SYSCALL_64_after_hwframe+0x6c/0x74 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock(&trigger_data->lock); lock(rtnl_mutex); lock(&trigger_data->lock); *** DEADLOCK *** 8 locks held by bash/383: #0: ffff888103ff33f0 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x6c/0xf0 #1: ffff888103aa1e88 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x114/0x210 #2: ffff8881036f1890 (kn->active#82){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x11d/0x210 #3: ffff888108e2c358 (&led_cdev->led_access){+.+.}-{3:3}, at: led_trigger_write+0x30/0x140 #4: ffffffff8cdd9e10 (triggers_list_lock){++++}-{3:3}, at: led_trigger_write+0x75/0x140 #5: ffff888108e2c270 (&led_cdev->trigger_lock){++++}-{3:3}, at: led_trigger_write+0xe3/0x140 #6: ffffffff8cdde3d0 (pernet_ops_rwsem){++++}-{3:3}, at: register_netdevice_notifier+0x1c/0x120 #7: ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20 stack backtrace: CPU: 0 PID: 383 Comm: bash Not tainted 6.7.0-rc2-next-20231124+ #2 Hardware name: Default string Default string/Default string, BIOS ADLN.M6.SODIMM.ZB.CY.015 08/08/2023 Call Trace: <TASK> dump_stack_lvl+0x5c/0xd0 dump_stack+0x10/0x20 print_circular_bug+0x2dd/0x410 check_noncircular+0x131/0x150 __lock_acquire+0x1459/0x25a0 lock_acquire+0xc8/0x2d0 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev] __mutex_lock+0x9b/0xb50 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev] ? __this_cpu_preempt_check+0x13/0x20 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev] ? __cancel_work_timer+0x11c/0x1b0 ? __mutex_lock+0x123/0xb50 mutex_lock_nested+0x16/0x20 ? mutex_lock_nested+0x16/0x20 netdev_trig_notify+0xec/0x190 [ledtrig_netdev] call_netdevice_register_net_notifiers+0x5a/0x100 register_netdevice_notifier+0x85/0x120 netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev] led_trigger_set+0x172/0x2c0 ? preempt_count_add+0x49/0xc0 led_trigger_write+0xf1/0x140 sysfs_kf_bin_write+0x5d/0x80 kernfs_fop_write_iter+0x15d/0x210 vfs_write+0x1f0/0x510 ksys_write+0x6c/0xf0 __x64_sys_write+0x14/0x20 do_syscall_64+0x3f/0xf0 entry_SYSCALL_64_after_hwframe+0x6c/0x74 RIP: 0033:0x7f269055d034 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d 35 c3 0d 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 48 89 54 24 18 48 RSP: 002b:00007ffddb7ef748 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000007 RCX: 00007f269055d034 RDX: 0000000000000007 RSI: 000055bf5f4af3c0 RDI: 0000000000000001 RBP: 000055bf5f4af3c0 R08: 0000000000000073 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000007 R13: 00007f26906325c0 R14: 00007f269062ff20 R15: 0000000000000000 </TASK> Fixes: d5e0126 ("leds: trigger: netdev: add additional specific link speed mode") Cc: [email protected] Signed-off-by: Heiner Kallweit <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Acked-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
vfusco
pushed a commit
that referenced
this pull request
Mar 8, 2024
I conducted real-time testing and observed that madvise_cold_or_pageout_pte_range() causes significant latency under memory pressure, which can be effectively reduced by adding cond_resched() within the loop. I tested on the LicheePi 4A board using Cylictest for latency testing and Ftrace for latency tracing. The board uses TH1520 processor and has a memory size of 8GB. The kernel version is 6.5.0 with the PREEMPT_RT patch applied. The script I tested is as follows: echo wakeup_rt > /sys/kernel/tracing/current_tracer echo 1 > /sys/kernel/tracing/tracing_on echo 0 > /sys/kernel/tracing/tracing_max_latency stress-ng --vm 8 --vm-bytes 2G & cyclictest --mlockall --smp --priority=99 --distance=0 --duration=30m echo 0 > /sys/kernel/tracing/tracing_on cat /sys/kernel/tracing/trace The tracing results before modification are as follows: # tracer: wakeup_rt # # wakeup_rt latency trace v1.1.5 on 6.5.0-rt6-r1208-00003-g999d221864bf # -------------------------------------------------------------------- # latency: 2552 us, #6/6, CPU#3 | (M:preempt_rt VP:0, KP:0, SP:0 HP:0 #P:4) # ----------------- # | task: cyclictest-196 (uid:0 nice:0 policy:1 rt_prio:99) # ----------------- # # _--------=> CPU# # / _-------=> irqs-off/BH-disabled # | / _------=> need-resched # || / _-----=> need-resched-lazy # ||| / _----=> hardirq/softirq # |||| / _---=> preempt-depth # ||||| / _--=> preempt-lazy-depth # |||||| / _-=> migrate-disable # ||||||| / delay # cmd pid |||||||| time | caller # \ / |||||||| \ | / stress-n-206 3dn.h512 2us : 206:120:R + [003] 196: 0:R cyclictest stress-n-206 3dn.h512 7us : <stack trace> => __ftrace_trace_stack => __trace_stack => probe_wakeup => ttwu_do_activate => try_to_wake_up => wake_up_process => hrtimer_wakeup => __hrtimer_run_queues => hrtimer_interrupt => riscv_timer_interrupt => handle_percpu_devid_irq => generic_handle_domain_irq => riscv_intc_irq => handle_riscv_irq => do_irq stress-n-206 3dn.h512 9us#: 0 stress-n-206 3d...3.. 2544us : __schedule stress-n-206 3d...3.. 2545us : 206:120:R ==> [003] 196: 0:R cyclictest stress-n-206 3d...3.. 2551us : <stack trace> => __ftrace_trace_stack => __trace_stack => probe_wakeup_sched_switch => __schedule => preempt_schedule => migrate_enable => rt_spin_unlock => madvise_cold_or_pageout_pte_range => walk_pgd_range => __walk_page_range => walk_page_range => madvise_pageout => madvise_vma_behavior => do_madvise => sys_madvise => do_trap_ecall_u => ret_from_exception The tracing results after modification are as follows: # tracer: wakeup_rt # # wakeup_rt latency trace v1.1.5 on 6.5.0-rt6-r1208-00004-gca3876fc69a6-dirty # -------------------------------------------------------------------- # latency: 1689 us, #6/6, CPU#0 | (M:preempt_rt VP:0, KP:0, SP:0 HP:0 #P:4) # ----------------- # | task: cyclictest-217 (uid:0 nice:0 policy:1 rt_prio:99) # ----------------- # # _--------=> CPU# # / _-------=> irqs-off/BH-disabled # | / _------=> need-resched # || / _-----=> need-resched-lazy # ||| / _----=> hardirq/softirq # |||| / _---=> preempt-depth # ||||| / _--=> preempt-lazy-depth # |||||| / _-=> migrate-disable # ||||||| / delay # cmd pid |||||||| time | caller # \ / |||||||| \ | / stress-n-232 0dn.h413 1us+: 232:120:R + [000] 217: 0:R cyclictest stress-n-232 0dn.h413 12us : <stack trace> => __ftrace_trace_stack => __trace_stack => probe_wakeup => ttwu_do_activate => try_to_wake_up => wake_up_process => hrtimer_wakeup => __hrtimer_run_queues => hrtimer_interrupt => riscv_timer_interrupt => handle_percpu_devid_irq => generic_handle_domain_irq => riscv_intc_irq => handle_riscv_irq => do_irq stress-n-232 0dn.h413 19us#: 0 stress-n-232 0d...3.. 1671us : __schedule stress-n-232 0d...3.. 1676us+: 232:120:R ==> [000] 217: 0:R cyclictest stress-n-232 0d...3.. 1687us : <stack trace> => __ftrace_trace_stack => __trace_stack => probe_wakeup_sched_switch => __schedule => preempt_schedule => migrate_enable => free_unref_page_list => release_pages => free_pages_and_swap_cache => tlb_batch_pages_flush => tlb_flush_mmu => unmap_page_range => unmap_vmas => unmap_region => do_vmi_align_munmap.constprop.0 => do_vmi_munmap => __vm_munmap => sys_munmap => do_trap_ecall_u => ret_from_exception After the modification, the cause of maximum latency is no longer madvise_cold_or_pageout_pte_range(), so this modification can reduce the latency caused by madvise_cold_or_pageout_pte_range(). Currently the madvise_cold_or_pageout_pte_range() function exhibits significant latency under memory pressure, which can be effectively reduced by adding cond_resched() within the loop. When the batch_count reaches SWAP_CLUSTER_MAX, we reschedule the task to ensure fairness and avoid long lock holding times. Link: https://lkml.kernel.org/r/85363861af65fac66c7a98c251906afc0d9c8098.1695291046.git.wangjiexun@tinylab.org Signed-off-by: Jiexun Wang <[email protected]> Cc: Zhangjin Wu <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
vfusco
pushed a commit
that referenced
this pull request
Mar 8, 2024
…te_call_indirect kprobe_emulate_call_indirect currently uses int3_emulate_call to emulate indirect calls. However, int3_emulate_call always assumes the size of the call to be 5 bytes when calculating the return address. This is incorrect for register-based indirect calls in x86, which can be either 2 or 3 bytes depending on whether REX prefix is used. At kprobe runtime, the incorrect return address causes control flow to land onto the wrong place after return -- possibly not a valid instruction boundary. This can lead to a panic like the following: [ 7.308204][ C1] BUG: unable to handle page fault for address: 000000000002b4d8 [ 7.308883][ C1] #PF: supervisor read access in kernel mode [ 7.309168][ C1] #PF: error_code(0x0000) - not-present page [ 7.309461][ C1] PGD 0 P4D 0 [ 7.309652][ C1] Oops: 0000 [#1] SMP [ 7.309929][ C1] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.7.0-rc5-trace-for-next #6 [ 7.310397][ C1] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 [ 7.311068][ C1] RIP: 0010:__common_interrupt+0x52/0xc0 [ 7.311349][ C1] Code: 01 00 4d 85 f6 74 39 49 81 fe 00 f0 ff ff 77 30 4c 89 f7 4d 8b 5e 68 41 ba 91 76 d8 42 45 03 53 fc 74 02 0f 0b cc ff d3 65 48 <8b> 05 30 c7 ff 7e 65 4c 89 3d 28 c7 ff 7e 5b 41 5c 41 5e 41 5f c3 [ 7.312512][ C1] RSP: 0018:ffffc900000e0fd0 EFLAGS: 00010046 [ 7.312899][ C1] RAX: 0000000000000001 RBX: 0000000000000023 RCX: 0000000000000001 [ 7.313334][ C1] RDX: 00000000000003cd RSI: 0000000000000001 RDI: ffff888100d302a4 [ 7.313702][ C1] RBP: 0000000000000001 R08: 0ef439818636191f R09: b1621ff338a3b482 [ 7.314146][ C1] R10: ffffffff81e5127b R11: ffffffff81059810 R12: 0000000000000023 [ 7.314509][ C1] R13: 0000000000000000 R14: ffff888100d30200 R15: 0000000000000000 [ 7.314951][ C1] FS: 0000000000000000(0000) GS:ffff88813bc80000(0000) knlGS:0000000000000000 [ 7.315396][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7.315691][ C1] CR2: 000000000002b4d8 CR3: 0000000003028003 CR4: 0000000000370ef0 [ 7.316153][ C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 7.316508][ C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 7.316948][ C1] Call Trace: [ 7.317123][ C1] <IRQ> [ 7.317279][ C1] ? __die_body+0x64/0xb0 [ 7.317482][ C1] ? page_fault_oops+0x248/0x370 [ 7.317712][ C1] ? __wake_up+0x96/0xb0 [ 7.317964][ C1] ? exc_page_fault+0x62/0x130 [ 7.318211][ C1] ? asm_exc_page_fault+0x22/0x30 [ 7.318444][ C1] ? __cfi_native_send_call_func_single_ipi+0x10/0x10 [ 7.318860][ C1] ? default_idle+0xb/0x10 [ 7.319063][ C1] ? __common_interrupt+0x52/0xc0 [ 7.319330][ C1] common_interrupt+0x78/0x90 [ 7.319546][ C1] </IRQ> [ 7.319679][ C1] <TASK> [ 7.319854][ C1] asm_common_interrupt+0x22/0x40 [ 7.320082][ C1] RIP: 0010:default_idle+0xb/0x10 [ 7.320309][ C1] Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 b8 0c 67 40 a5 66 90 0f 00 2d 09 b9 3b 00 fb f4 <fa> c3 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 b8 0c 67 40 a5 e9 [ 7.321449][ C1] RSP: 0018:ffffc9000009bee8 EFLAGS: 00000256 [ 7.321808][ C1] RAX: ffff88813bca8b68 RBX: 0000000000000001 RCX: 000000000001ef0c [ 7.322227][ C1] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 000000000001ef0c [ 7.322656][ C1] RBP: ffffc9000009bef8 R08: 8000000000000000 R09: 00000000000008c2 [ 7.323083][ C1] R10: 0000000000000000 R11: ffffffff81058e70 R12: 0000000000000000 [ 7.323530][ C1] R13: ffff8881002b30c0 R14: 0000000000000000 R15: 0000000000000000 [ 7.323948][ C1] ? __cfi_lapic_next_deadline+0x10/0x10 [ 7.324239][ C1] default_idle_call+0x31/0x50 [ 7.324464][ C1] do_idle+0xd3/0x240 [ 7.324690][ C1] cpu_startup_entry+0x25/0x30 [ 7.324983][ C1] start_secondary+0xb4/0xc0 [ 7.325217][ C1] secondary_startup_64_no_verify+0x179/0x17b [ 7.325498][ C1] </TASK> [ 7.325641][ C1] Modules linked in: [ 7.325906][ C1] CR2: 000000000002b4d8 [ 7.326104][ C1] ---[ end trace 0000000000000000 ]--- [ 7.326354][ C1] RIP: 0010:__common_interrupt+0x52/0xc0 [ 7.326614][ C1] Code: 01 00 4d 85 f6 74 39 49 81 fe 00 f0 ff ff 77 30 4c 89 f7 4d 8b 5e 68 41 ba 91 76 d8 42 45 03 53 fc 74 02 0f 0b cc ff d3 65 48 <8b> 05 30 c7 ff 7e 65 4c 89 3d 28 c7 ff 7e 5b 41 5c 41 5e 41 5f c3 [ 7.327570][ C1] RSP: 0018:ffffc900000e0fd0 EFLAGS: 00010046 [ 7.327910][ C1] RAX: 0000000000000001 RBX: 0000000000000023 RCX: 0000000000000001 [ 7.328273][ C1] RDX: 00000000000003cd RSI: 0000000000000001 RDI: ffff888100d302a4 [ 7.328632][ C1] RBP: 0000000000000001 R08: 0ef439818636191f R09: b1621ff338a3b482 [ 7.329223][ C1] R10: ffffffff81e5127b R11: ffffffff81059810 R12: 0000000000000023 [ 7.329780][ C1] R13: 0000000000000000 R14: ffff888100d30200 R15: 0000000000000000 [ 7.330193][ C1] FS: 0000000000000000(0000) GS:ffff88813bc80000(0000) knlGS:0000000000000000 [ 7.330632][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7.331050][ C1] CR2: 000000000002b4d8 CR3: 0000000003028003 CR4: 0000000000370ef0 [ 7.331454][ C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 7.331854][ C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 7.332236][ C1] Kernel panic - not syncing: Fatal exception in interrupt [ 7.332730][ C1] Kernel Offset: disabled [ 7.333044][ C1] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- The relevant assembly code is (from objdump, faulting address highlighted): ffffffff8102ed9d: 41 ff d3 call *%r11 ffffffff8102eda0: 65 48 <8b> 05 30 c7 ff mov %gs:0x7effc730(%rip),%rax The emulation incorrectly sets the return address to be ffffffff8102ed9d + 0x5 = ffffffff8102eda2, which is the 8b byte in the middle of the next mov. This in turn causes incorrect subsequent instruction decoding and eventually triggers the page fault above. Instead of invoking int3_emulate_call, perform push and jmp emulation directly in kprobe_emulate_call_indirect. At this point we can obtain the instruction size from p->ainsn.size so that we can calculate the correct return address. Link: https://lore.kernel.org/all/[email protected]/ Fixes: 6256e66 ("x86/kprobes: Use int3 instead of debug trap for single-step") Cc: [email protected] Signed-off-by: Jinghao Jia <[email protected]> Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
vfusco
pushed a commit
that referenced
this pull request
Mar 8, 2024
[ Upstream commit a84fbf2 ] Generating metrics llc_code_read_mpi_demand_plus_prefetch, llc_data_read_mpi_demand_plus_prefetch, llc_miss_local_memory_bandwidth_read, llc_miss_local_memory_bandwidth_write, nllc_miss_remote_memory_bandwidth_read, memory_bandwidth_read, memory_bandwidth_write, uncore_frequency, upi_data_transmit_bw, C2_Pkg_Residency, C3_Core_Residency, C3_Pkg_Residency, C6_Core_Residency, C6_Pkg_Residency, C7_Core_Residency, C7_Pkg_Residency, UNCORE_FREQ and tma_info_system_socket_clks would trigger an address sanitizer heap-buffer-overflows on a SkylakeX. ``` ==2567752==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x5020003ed098 at pc 0x5621a816654e bp 0x7fffb55d4da0 sp 0x7fffb55d4d98 READ of size 4 at 0x5020003eee78 thread T0 #0 0x558265d6654d in aggr_cpu_id__is_empty tools/perf/util/cpumap.c:694:12 #1 0x558265c914da in perf_stat__get_aggr tools/perf/builtin-stat.c:1490:6 #2 0x558265c914da in perf_stat__get_global_cached tools/perf/builtin-stat.c:1530:9 #3 0x558265e53290 in should_skip_zero_counter tools/perf/util/stat-display.c:947:31 #4 0x558265e53290 in print_counter_aggrdata tools/perf/util/stat-display.c:985:18 #5 0x558265e51931 in print_counter tools/perf/util/stat-display.c:1110:3 #6 0x558265e51931 in evlist__print_counters tools/perf/util/stat-display.c:1571:5 #7 0x558265c8ec87 in print_counters tools/perf/builtin-stat.c:981:2 #8 0x558265c8cc71 in cmd_stat tools/perf/builtin-stat.c:2837:3 #9 0x558265bb9bd4 in run_builtin tools/perf/perf.c:323:11 #10 0x558265bb98eb in handle_internal_command tools/perf/perf.c:377:8 #11 0x558265bb9389 in run_argv tools/perf/perf.c:421:2 #12 0x558265bb9389 in main tools/perf/perf.c:537:3 ``` The issue was the use of testing a cpumap with NULL rather than using empty, as a map containing the dummy value isn't NULL and the -1 results in an empty aggr map being allocated which legitimately overflows when any member is accessed. Fixes: 8a96f45 ("perf stat: Avoid SEGV if core.cpus isn't set") Signed-off-by: Ian Rogers <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
vfusco
pushed a commit
that referenced
this pull request
Mar 8, 2024
[ Upstream commit ede72dc ] Fuzzing found that an invalid tracepoint name would create a memory leak with an address sanitizer build: ``` $ perf stat -e '*:o/' true event syntax error: '*:o/' \___ parser error Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event> event selector. use 'perf list' to list available events ================================================================= ==59380==ERROR: LeakSanitizer: detected memory leaks Direct leak of 4 byte(s) in 2 object(s) allocated from: #0 0x7f38ac07077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439 #1 0x55f2f41be73b in str util/parse-events.l:49 #2 0x55f2f41d08e8 in parse_events_lex util/parse-events.l:338 #3 0x55f2f41dc3b1 in parse_events_parse util/parse-events-bison.c:1464 #4 0x55f2f410b8b3 in parse_events__scanner util/parse-events.c:1822 #5 0x55f2f410d1b9 in __parse_events util/parse-events.c:2094 #6 0x55f2f410e57f in parse_events_option util/parse-events.c:2279 #7 0x55f2f4427b56 in get_value tools/lib/subcmd/parse-options.c:251 #8 0x55f2f4428d98 in parse_short_opt tools/lib/subcmd/parse-options.c:351 #9 0x55f2f4429d80 in parse_options_step tools/lib/subcmd/parse-options.c:539 #10 0x55f2f442acb9 in parse_options_subcommand tools/lib/subcmd/parse-options.c:654 #11 0x55f2f3ec99fc in cmd_stat tools/perf/builtin-stat.c:2501 #12 0x55f2f4093289 in run_builtin tools/perf/perf.c:322 #13 0x55f2f40937f5 in handle_internal_command tools/perf/perf.c:375 #14 0x55f2f4093bbd in run_argv tools/perf/perf.c:419 #15 0x55f2f409412b in main tools/perf/perf.c:535 SUMMARY: AddressSanitizer: 4 byte(s) leaked in 2 allocation(s). ``` Fix by adding the missing destructor. Fixes: 865582c ("perf tools: Adds the tracepoint name parsing support") Signed-off-by: Ian Rogers <[email protected]> Cc: He Kuang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Related to cartesi/image-kernel#15