The MX29F1615 programmer is an open source hardware and software solution which allows programming readily available 2MB Flash parts which are pin compatible with common 27C160 EPROM parts. These parts are mostly backward-compatible with 27C400 parts that are directly compatible with Kickstart ROM chips common to all Amiga models since the Amiga 500. The MX29F1615 and 27C160 parts implement up to 2MB of addressible space by adding two extra pins which are not present on the 27C400.
The fw directory contains STM32 firmware for all board revisions.
The sw directory contains software which runs on your Linux or MacOS host that can communicate with the STM32 firmware to read / erase / program the MX29F1615 EEPROM.
Building mxprog from Linux:
git clone https://github.com/cdhooper/mx29f1615_programmer
cd mx29f1615_programmer/sw
make
Installation
sudo cp mxprog /usr/local/bin
sudo chown root.root /usr/local/bin/mxprog
sudo chmod 4755 /usr/local/bin/mxprog