Fixed incorrect tests

The previous fixes now let the CLI to produce the correct output.

internal/integrationtest/monitor/monitor_test.go

@@ -287,30 +287,25 @@ yun.serial.disableDTR=true
 			stdout, _, err := cli.RunWithCustomInput(quitMonitor(), "monitor", "-b", "arduino:avr:uno", "--raw", "--profile", "profile1", sketchWithPortAndFQBN)
 			require.NoError(t, err)
 			require.Contains(t, string(stdout), "Opened port: /dev/ttyDEF")
-			require.Contains(t, string(stdout), "Configuration rts = off")
+			require.Contains(t, string(stdout), "Configuration rts = on") // This is taken from profile-downloaded platform that is not patched for test
 			require.Contains(t, string(stdout), "Configuration dtr = on")
 		})
 
 		t.Run("WithDefaultPortAndConfig", func(t *testing.T) {
-			stdout, _, err := cli.RunWithCustomInput(quitMonitor(), "monitor", "-b", "arduino:avr:uno", "--raw", "--profile", "profile1", sketchWithPortAndConfig)
-			require.NoError(t, err)
-			require.Contains(t, string(stdout), "Opened port: /dev/ttyDEF")
-			require.Contains(t, string(stdout), "Configuration rts = off")
-			require.Contains(t, string(stdout), "Configuration dtr = on")
-			require.Contains(t, string(stdout), "Configuration baudrate = 57600")
-			require.Contains(t, string(stdout), "Configuration bits = 9")
-			require.Contains(t, string(stdout), "Configuration parity = none")
-			require.Contains(t, string(stdout), "Configuration stop_bits = 1")
+			_, stderr, err := cli.RunWithCustomInput(quitMonitor(), "monitor", "-b", "arduino:avr:uno", "--raw", "--profile", "profile1", sketchWithPortAndConfig)
+			require.Error(t, err)
+			require.Contains(t, string(stderr), "Profile 'profile1' not found")
+			require.Contains(t, string(stderr), "Unknown FQBN: unknown package arduino")
 		})
 
 		t.Run("WithDefaultPortAndConfigAndProfile", func(t *testing.T) {
-			stdout, _, err := cli.RunWithCustomInput(quitMonitor(), "monitor", "-b", "arduino:avr:uno", "--raw", "--profile", "profile1", sketchWithPortAndConfigAndProfile)
+			stdout, _, err := cli.RunWithCustomInput(quitMonitor(), "monitor", "-b", "arduino:avr:uno", "--raw", "--profile", "uno", sketchWithPortAndConfigAndProfile)
 			require.NoError(t, err)
-			require.Contains(t, string(stdout), "Opened port: /dev/ttyDEF")
-			require.Contains(t, string(stdout), "Configuration rts = off")
+			require.Contains(t, string(stdout), "Opened port: /dev/ttyPROF")
+			require.Contains(t, string(stdout), "Configuration rts = on") // This is taken from profile-downloaded platform that is not patched for test
 			require.Contains(t, string(stdout), "Configuration dtr = on")
-			require.Contains(t, string(stdout), "Configuration baudrate = 57600")
-			require.Contains(t, string(stdout), "Configuration bits = 9")
+			require.Contains(t, string(stdout), "Configuration baudrate = 19200")
+			require.Contains(t, string(stdout), "Configuration bits = 8")
 			require.Contains(t, string(stdout), "Configuration parity = none")
 			require.Contains(t, string(stdout), "Configuration stop_bits = 1")
 		})
@@ -377,7 +372,7 @@ yun.serial.disableDTR=true
 			stdout, _, err := cli.RunWithCustomInput(quitMonitor(), "monitor", "-p", "/dev/ttyARGS", "-b", "arduino:avr:uno", "--raw", "--profile", "profile1", sketchWithPortAndFQBN)
 			require.NoError(t, err)
 			require.Contains(t, string(stdout), "Opened port: /dev/ttyARGS")
-			require.Contains(t, string(stdout), "Configuration rts = off")
+			require.Contains(t, string(stdout), "Configuration rts = on") // This is taken from profile-downloaded platform that is not patched for test
 			require.Contains(t, string(stdout), "Configuration dtr = on")
 		})
 	})

internal/integrationtest/monitor/testdata/SketchWithDefaultPortAndFQBN/sketch.yaml

@@ -1,5 +1,8 @@
-default_port: /dev/ttyDEF
-default_fqbn: arduino:avr:yun
 profiles:
   profile1:
     fqbn: "broken_fqbn"
+    platforms:
+      - platform: arduino:avr (1.8.6)
+
+default_port: /dev/ttyDEF
+default_fqbn: arduino:avr:yun