Skip to content

Commit

Permalink
ramips: add support for Rostelecom RT-FE-1A
Browse files Browse the repository at this point in the history 
Rostelecom RT-FE-1A is a wireless WiFi 5 router manufactured by Sercomm
company.

Device specification
--------------------
SoC Type: MediaTek MT7621AT
RAM: 256 MiB
Flash: 128 MiB
Wireless 2.4 GHz (MT7603EN): b/g/n, 2x2
Wireless 5 GHz (MT7615E): a/n/ac, 4x4
Ethernet: 5x GbE (WAN, LAN1, LAN2, LAN3, LAN4)
USB ports: No
Button: 2 buttons (Reset & WPS)
LEDs:
   - 1x Power (green, unmanaged)
   - 1x Status (green, gpio)
   - 1x 2.4G (green, hardware, mt76-phy0)
   - 1x 2.4G (blue, gpio)
   - 1x 5G (green, hardware, mt76-phy1)
   - 1x 5G (blue, gpio)
   - 5x Ethernet (green, hardware, 4x LAN & WAN)
Power: 12 VDC, 1.5 A
Connector type: barrel
Bootloader: U-Boot

Installation
-----------------

1.  Login to the router web interface (default http://192.168.0.1/)
    under "admin" account

2.  Navigate to Settings -> Configuration -> Save to Computer

3.  Decode the configuration. For example, using cfgtool.py tool (see
    related section):
    cfgtool.py -u configurationBackup.cfg

4.  Open configurationBackup.xml and find the following block:

<OBJECT name="User." type="object" writable="1" encryption="0" >
<OBJECT name="1." type="object" writable="1" encryption="0" >
<PARAMETER name="Password" type="string" value="<some value>" writable="1" encryption="1" password="1" />
</OBJECT>

5.  Replace <some value> by a new superadmin password and add a line
    which enabling superadmin login after. For example, the block after
    the changes:

<OBJECT name="User." type="object" writable="1" encryption="0" >
<OBJECT name="1." type="object" writable="1" encryption="0" >
<PARAMETER name="Password" type="string" value="s0meP@ss" writable="1" encryption="1" password="1" />
<PARAMETER name="Enable" type="boolean" value="1" writable="1" encryption="0"/>
</OBJECT>

6.  Encode the configuration. For example, using cfgtool.py tool:
       cfgtool.py -p configurationBackup.xml

7.  Upload the changed configuration (configurationBackup_changed.cfg) to
    the router

8.  Login to the router web interface (superadmin:xxxxxxxxxx, where
    xxxxxxxxxx is a new password from the p.5)

9.  Enable SSH access to the router (Settings -> Access control -> SSH)

10. Connect to the router using SSH shell using superadmin account

11. Run in SSH shell:
    sh

12. Make a mtd backup (optional, see related section)

13. Change bootflag to Sercomm1 and reboot:
    printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3
    reboot

14. Login to the router web interface under admin account

15. Remove dots from the OpenWrt factory image filename

16. Update firmware via web using OpenWrt factory image

Revert to stock
---------------
Change bootflag to Sercomm1 in OpenWrt CLI and then reboot:
   printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3

mtd backup
----------
1. Set up a tftp server (e.g. tftpd64 for windows)
2. Connect to a router using SSH shell and run the following commands:
   cd /tmp
   for i in 0 1 2 3 4 5 6 7 8 9; do nanddump -f mtd$i /dev/mtd$i; \
   tftp -l mtd$i -p 192.168.0.2; md5sum mtd$i >> mtd.md5; rm mtd$i; done
   tftp -l mtd.md5 -p 192.168.0.2

MAC Addresses
-------------
+-----+------------+---------+
| use | address    | example |
+-----+------------+---------+
| LAN | label      | f4:*:66 |
| WAN | label + 11 | f4:*:71 |
| 2g  | label + 2  | f4:*:68 |
| 5g  | label + 3  | f4:*:69 |
+-----+------------+---------+
The label MAC address was found in Factory, 0x21000

cfgtool.py
----------
A tool for decoding and encoding Sercomm configs.
Link: https://github.com/r3d5ky/sercomm_cfg_unpacker

Signed-off-by: Mikhail Zhilkin <[email protected]>
(cherry picked from commit f3cdc9f)
  • Loading branch information
@csharper2005
csharper2005 committed Dec 8, 2023
1 parent 6df6f03 commit 957e280
Show file tree
Hide file tree
Showing 4 changed files with 282 additions and 0 deletions.
1 change: 1 addition & 0 deletions package/boot/uboot-envtools/files/ramips
View file
Original file line number Diff line number Diff line change
Expand Up @@ -43,6 +43,7 @@ beeline,smartbox-giga|\
beeline,smartbox-turbo|\
beeline,smartbox-turbo-plus|\
etisalat,s3|\
rostelecom,rt-fe-1a|\
rostelecom,rt-sf-1)
ubootenv_add_uci_config "/dev/mtd0" "0x80000" "0x1000" "0x20000"
;;
Expand Down
266 changes: 266 additions & 0 deletions target/linux/ramips/dts/mt7621_rostelecom_rt-fe-1a.dts
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,266 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "mt7621.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>

/ {
compatible = "rostelecom,rt-fe-1a", "mediatek,mt7621-soc";
model = "Rostelecom RT-FE-1A";

aliases {
label-mac-device = &gmac0;

led-boot = &led_status_green;
led-failsafe = &led_status_green;
led-running = &led_status_green;
led-upgrade = &led_status_green;
};

leds {
compatible = "gpio-leds";

led-0 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_WLAN;
function-enumerator = <50>;
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
};

led-1 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_WLAN;
function-enumerator = <24>;
gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};

led_status_green: led-2 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
};

keys {
compatible = "gpio-keys";

button-0 {
label = "wps";
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WPS_BUTTON>;
};

button-1 {
label = "reset";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};

ubi-concat {
compatible = "mtd-concat";
devices = <&ubiconcat0 &ubiconcat1 &ubiconcat2 \
&ubiconcat3>;

partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;

partition@0 {
label = "ubi";
reg = <0x0 0x5420000>;
};
};
};
};

&nand {
status = "okay";

partitions {
compatible = "sercomm,sc-partitions", "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;

partition@0 {
label = "u-boot";
reg = <0x0 0x100000>;
sercomm,scpart-id = <0>;
read-only;
};

partition@100000 {
label = "dynamic partition map";
reg = <0x100000 0x100000>;
sercomm,scpart-id = <1>;
read-only;
};

partition@200000 {
label = "Factory";
reg = <0x200000 0x100000>;
sercomm,scpart-id = <2>;
read-only;

nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;

eeprom_2g: eeprom@0 {
reg = <0x0 0x400>;
};

eeprom_5g: eeprom@8000 {
reg = <0x8000 0x4da8>;
};

macaddr_label: macaddr@21000 {
compatible = "mac-base";
reg = <0x21000 0x6>;
#nvmem-cell-cells = <1>;
};
};
};

partition@300000 {
label = "Boot Flag";
reg = <0x300000 0x100000>;
sercomm,scpart-id = <3>;
};

partition@400000 {
label = "kernel";
reg = <0x400000 0x600000>;
sercomm,scpart-id = <4>;
};

partition@a00000 {
label = "Kernel 2";
reg = <0xa00000 0x600000>;
sercomm,scpart-id = <5>;
read-only;
};

ubiconcat0: partition@1000000 {
label = "File System 1";
reg = <0x1000000 0x1800000>;
sercomm,scpart-id = <6>;
};

partition@2800000 {
label = "File System 2";
reg = <0x2800000 0x1800000>;
sercomm,scpart-id = <7>;
read-only;
};

ubiconcat1: partition@4000000 {
label = "Configuration/log";
reg = <0x4000000 0x800000>;
sercomm,scpart-id = <8>;
};

ubiconcat2: partition@4800000 {
label = "application tmp buffer (Ftool)";
reg = <0x4800000 0xc00000>;
sercomm,scpart-id = <9>;
};

ubiconcat3: partition@5400000 {
label = "free space (in stock firmware)";
reg = <0x5400000 0x2820000>;
sercomm,scpart-id = <10>;
};
};
};

&pcie {
status = "okay";
};

&pcie0 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
ieee80211-freq-limit = <5000000 6000000>;

nvmem-cells = <&eeprom_5g>, <&macaddr_label 3>;
nvmem-cell-names = "eeprom", "mac-address";

led {
led-active-low;
};
};
};

&pcie1 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
ieee80211-freq-limit = <2400000 2500000>;

nvmem-cells = <&eeprom_2g>, <&macaddr_label 2>;
nvmem-cell-names = "eeprom", "mac-address";

led {
led-active-low;
};
};
};

&gmac0 {
nvmem-cells = <&macaddr_label 0>;
nvmem-cell-names = "mac-address";
};

&gmac1 {
status = "okay";
label = "wan";
phy-handle = <&ethphy0>;

nvmem-cells = <&macaddr_label 11>;
nvmem-cell-names = "mac-address";
};

&mdio {
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};

&switch0 {
ports {
port@1 {
status = "okay";
label = "lan1";
};

port@2 {
status = "okay";
label = "lan2";
};

port@3 {
status = "okay";
label = "lan3";
};

port@4 {
status = "okay";
label = "lan4";
};
};
};

&state_default {
gpio {
groups = "jtag", "uart2", "uart3", "wdt";
function = "gpio";
};
};
14 changes: 14 additions & 0 deletions target/linux/ramips/image/mt7621.mk
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1947,6 +1947,20 @@ define Device/renkforce_ws-wn530hp3-a
endef
TARGET_DEVICES += renkforce_ws-wn530hp3-a

define Device/rostelecom_rt-fe-1a
$(Device/sercomm_dxx)
IMAGE_SIZE := 24576k
SERCOMM_HWID := CX4
SERCOMM_HWVER := 11300
SERCOMM_SWVER := 2010
DEVICE_VENDOR := Rostelecom
DEVICE_MODEL := RT-FE-1A
DEVICE_ALT0_VENDOR := Sercomm
DEVICE_ALT0_MODEL := RT-FE-1A
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware
endef
TARGET_DEVICES += rostelecom_rt-fe-1a

define Device/rostelecom_rt-sf-1
$(Device/sercomm_dxx)
IMAGE_SIZE := 32768k
Expand Down
1 change: 1 addition & 0 deletions target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
View file
Original file line number Diff line number Diff line change
Expand Up @@ -102,6 +102,7 @@ platform_do_upgrade() {
netgear,wax202|\
netis,wf2881|\
raisecom,msg1500-x-00|\
rostelecom,rt-fe-1a|\
rostelecom,rt-sf-1|\
sercomm,na502|\
sercomm,na502s|\
Expand Down

0 comments on commit 957e280

Please sign in to comment.