nordpool_planner custom component for Home Assistant

Requires https://github.com/custom-components/nordpool

NOTE: This is a based on https://github.com/jpulakka/nordpool_diff

Nord Pool gives you spot prices, but making good use of those prices is not easy. This component provides various a boolean if now is the right time to activate high consumption based on future prices in a specified range. Given a time-span from now and an number of hours forward it searches for the start-time that has the lowest average price over a specified duration window.

Apart from potentially saving some money, this kind of temporal shifting of consumption can also save the environment, because expensive peaks are produced by dirtier energy sources. Also helps solving Europe's electricity crisis.

Installation

Option 1: HACS

1. Install and configure https://github.com/custom-components/nordpool first.
2. Go to HACS -> Integrations
3. Click the three dots on the top right and select Custom Repositories
4. Enter https://github.com/dala318/nordpool_planner as repository, select the category Integration and click Add
5. A new custom integration shows up for installation (Nordpool Planner) - install it
6. Restart Home Assistant

Option 2: Manual

1. Install and configure https://github.com/custom-components/nordpool first.
2. Copy the nordpool_planner folder to HA <config_dir>/custom_components/nordpool_planner/
3. Restart Home Assistant

Configuration

IMPORTANT NOTE: With version 2 configuration via configuration.yaml is no longer possible. Converting that configuration via "import config" is still not implemented. You wil have to remove the old now broken manual configuration and create a new via the GUI.

During setup some preconditions and selections are needed:

• Give a name to the service
• Select type "Moving" or "Static", more about these below (only moving is properly implemented)
• Select Nordpool prices entity from list to base states on (ENTSO-e are selectable but very untested)
• Select which optional features you want activated, more about these below as well
• Submit and set your configuration parameters

Moving

Two non-optional configuration entities will be created and you need to set these to a value that matches your consumption profile.

• search_length specifies how many hours ahead to search for lowest price.
• duration specifies how large window to average when searching for lowest price

The service will then take duration number of consecutive prices from the nordpool sensor starting from now and average them, then shift start one hour and repeat, until reaching search_length from now. If no optional features activated the duration window in the current range of prices within search_length with lowest average is selected as cheapest and the low_cost entity will turn on if now is within those hours.

In general you should set search_length to a value how long you could wait to activate high-consumption device and duration to how long it have to be kept active. But you have to test different settings to find your optimal configuration.

What should be said is that since the search_length window is continuously moving forward for every hour that passes the lowest cost duration may change as new prices comes inside range of search. There is also no guarantee that it will keep active for duration once activated.

Static

WORK IN PROGRESS: This version of entity is still not fully tested, may need some more work to work properly.

end_hour can be in the range of 0 to 23 and specifies at what time within 24 hours the amount of active hours shall be selected.

The integration will use var_end_hour_entity if supplied and can be interpreted as int, otherwise end_hour or the default value.

NOT IMPLEMENTED: No support implemented to use this setting split_hours tell if allowed to find low-cost hours that are not consecutive

Optional features

Accept cost

Creates a configuration number entity slider that accepts the first price that has an average price below this value, regardless if there are lower prices further ahead.

Accept rate

Creates a configuration number entity slider that accepts the first price that has an average price-rate to Nordpool average below this value, regardless if there are lower prices further ahead.

This is more dynamic in the sense that it adapts to overall price level, but there are some consideration you need to think of (and extra logic may have to be implemented).

• If Nordpool average happens to be Zero it will not work (duration-average / nordpool-average)
• If any of nordpool-average or duration-average is negative the rate will be negative. If both negative the rate will be positive.

High cost

This was requested as an extra feature and creates a binary sensor which tell in the current duration has the highest cost in the search_length. It's to large extent the inverse of the standard low_cost entity but without the extra options for accept_cost or accept_rate.

Starts at

No extra logic, just creates extra sensor entities that tell in plain values when each of the binary sensors will activate. Same value that is in the extra_attributes of the binary sensor.

The planner types has some additional configuration variables

Binary sensor attributes

Apart from the true/false if now is the time to turn on electricity usage the sensor provides some attributes.

starts_at tell when the next low-point starts

cost_at tell what the average cost is at the lowest point identified

now_cost_rate tell a comparison current price / best average. Is just a comparison to how much more expensive the electricity is right now compared to the found slot. E.g. 2 means you could half the cost by waiting for the found slot. It will turn UNAVAILABLE if best average is zero

Automation blueprints

Fixed temp and offset

Import this blueprint and choose the nordpool_planner low & high cost states, and the climate entity you want to control.

Now, whenever the price goes up or down, Nordpool Planner will change the temperature based on the price.

Based on input numbers

First make sure to create two input number entities for base temperature and offset

Import this blueprint and choose your newly created input numbers, the nordpool_planner low & high cost states, and the climate entity you want to control.

Now, whenever you change the input numbers or the price goes up or down, Nordpool Planner will change the temperature based on the price.

Usage

Some words should be said about the usage and how it behaves.

The search length variable should be set to to a value within which you could accept no high electricity usage, and the ratio window/search should somewhat correspond to the active/passive time of your main user of electricity. Still, the search window for the optimal spot to electricity is moving along in front of current time, so there might be a longer duration of passive usage than the search length. Therefor keeping the search length low (3-5h) should likely be optimal, unless you have a large storage capacity of electricity/heat that can wait for a longer duration and when cheap electricity draw as much as possible.

If to explain by an image, first orange is now, second orange is search_length ahead in time, width of green is duration and placed where it has found the cheapest average price within the orange.

Try it and feedback how it works or if there are any improvement to be done!

Tuning your settings

I found it useful to setup a simple history graph chart comparing the values from nordpool, nordpool_diff and nordpool_planner like this.

Where from top to bottom my named entities are:

• nordpool_diff: duration 3 in search_length 10, accept_cost 2.0
• nordpool_diff: duration 2 in search_length 5, accept_cost 2.0 and accept_rate 0.7
• nordpool average: just a template sensor extracting the nordpool attribute average to an entity for easier tracking and comparisons "{{ state_attr('sensor.nordpool_kwh_se3_sek_3_10_025', 'average') | float }}"
• nordpool
• nordpool_diff: