Process completed with exit code 1.

Process completed with exit code 1.

Process completed with exit code 1.

The process '/Users/runner/miniconda3/condabin/mamba' failed with exit code 1

Process completed with exit code 1.

Process completed with exit code 1.

Process completed with exit code 1.

Process completed with exit code 1.

Process completed with exit code 1.

Process completed with exit code 1.

Process completed with exit code 1.

Process completed with exit code 1.

Process completed with exit code 1.

Process completed with exit code 1.

Process completed with exit code 1.

Process completed with exit code 1.

Process completed with exit code 1.

Process completed with exit code 1.

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: conda-incubator/[email protected], actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

Future Miniforge releases will NOT build Mambaforge installers. We advise you switch to Miniforge at your earliest convenience. More details at https://conda-forge.org/news/2024/07/29/sunsetting-mambaforge/.

Mamba support is still experimental and can result in differently solved environments!

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: conda-incubator/[email protected], actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

Future Miniforge releases will NOT build Mambaforge installers. We advise you switch to Miniforge at your earliest convenience. More details at https://conda-forge.org/news/2024/07/29/sunsetting-mambaforge/.

Mamba support is still experimental and can result in differently solved environments!

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: conda-incubator/[email protected], actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

Future Miniforge releases will NOT build Mambaforge installers. We advise you switch to Miniforge at your earliest convenience. More details at https://conda-forge.org/news/2024/07/29/sunsetting-mambaforge/.

Mamba support is still experimental and can result in differently solved environments!

The following actions use a deprecated Node.js version and will be forced to run on node20: conda-incubator/[email protected]. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

Future Miniforge releases will NOT build Mambaforge installers. We advise you switch to Miniforge at your earliest convenience. More details at https://conda-forge.org/news/2024/07/29/sunsetting-mambaforge/.

Mamba support is still experimental and can result in differently solved environments!

CondaHTTPError: HTTP 502 BAD GATEWAY for url <https://conda.anaconda.org/conda-forge/osx-64/zstandard-0.23.0-py311hdf6fcd6_1.conda> Elapsed: 00:03.051312 CF-RAY: 8d65a8c0beda3ac2-DFW An HTTP error occurred when trying to retrieve this URL. HTTP errors are often intermittent, and a simple retry will get you on your way. CondaHTTPError: HTTP 502 BAD GATEWAY for url <https://conda.anaconda.org/conda-forge/osx-64/zstandard-0.23.0-py311hdf6fcd6_1.conda> Elapsed: 00:03.051312 CF-RAY: 8d65a8c0beda3ac2-DFW An HTTP error occurred when trying to retrieve this URL. HTTP errors are often intermittent, and a simple retry will get you on your way.

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: conda-incubator/[email protected], actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

Future Miniforge releases will NOT build Mambaforge installers. We advise you switch to Miniforge at your earliest convenience. More details at https://conda-forge.org/news/2024/07/29/sunsetting-mambaforge/.

Mamba support is still experimental and can result in differently solved environments!

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: conda-incubator/[email protected], actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

Mambaforge is now deprecated! Future Miniforge releases will NOT build Mambaforge installers. We advise you switch to Miniforge at your earliest convenience. More details at https://conda-forge.org/news/2024/07/29/sunsetting-mambaforge/. If you require Mambaforge, you may pin your installer to one found in https://github.com/conda-forge/miniforge/releases/tag/24.7.1-0

'powershell' is not recognized as an internal or external command, operable program or batch file.

'powershell' is not recognized as an internal or external command, operable program or batch file.

WARNING conda.activate:native_path_to_unix(1034): cygpath is not available, fallback to manual path conversion

WARNING conda.activate:native_path_to_unix(1034): cygpath is not available, fallback to manual path conversion

WARNING conda.activate:native_path_to_unix(1034): cygpath is not available, fallback to manual path conversion

WARNING conda.activate:native_path_to_unix(1034): cygpath is not available, fallback to manual path conversion

WARNING conda.activate:native_path_to_unix(1034): cygpath is not available, fallback to manual path conversion

Mamba support is still experimental and can result in differently solved environments!

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: conda-incubator/[email protected], actions-rs/toolchain@v1, actions/upload-artifact@v3. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

Future Miniforge releases will NOT build Mambaforge installers. We advise you switch to Miniforge at your earliest convenience. More details at https://conda-forge.org/news/2024/07/29/sunsetting-mambaforge/.

Mamba support is still experimental and can result in differently solved environments!

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: conda-incubator/[email protected], actions-rs/toolchain@v1, actions/upload-artifact@v3. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

Future Miniforge releases will NOT build Mambaforge installers. We advise you switch to Miniforge at your earliest convenience. More details at https://conda-forge.org/news/2024/07/29/sunsetting-mambaforge/.

Mamba support is still experimental and can result in differently solved environments!

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: conda-incubator/[email protected], actions-rs/toolchain@v1, actions/upload-artifact@v3. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

Future Miniforge releases will NOT build Mambaforge installers. We advise you switch to Miniforge at your earliest convenience. More details at https://conda-forge.org/news/2024/07/29/sunsetting-mambaforge/.

Mamba support is still experimental and can result in differently solved environments!

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: conda-incubator/[email protected], actions-rs/toolchain@v1, actions/upload-artifact@v3. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

Future Miniforge releases will NOT build Mambaforge installers. We advise you switch to Miniforge at your earliest convenience. More details at https://conda-forge.org/news/2024/07/29/sunsetting-mambaforge/.

Mamba support is still experimental and can result in differently solved environments!

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: conda-incubator/[email protected], actions-rs/toolchain@v1, actions/upload-artifact@v3. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

Future Miniforge releases will NOT build Mambaforge installers. We advise you switch to Miniforge at your earliest convenience. More details at https://conda-forge.org/news/2024/07/29/sunsetting-mambaforge/.

Mamba support is still experimental and can result in differently solved environments!

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: conda-incubator/[email protected], actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

Future Miniforge releases will NOT build Mambaforge installers. We advise you switch to Miniforge at your earliest convenience. More details at https://conda-forge.org/news/2024/07/29/sunsetting-mambaforge/.

Mamba support is still experimental and can result in differently solved environments!

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: conda-incubator/[email protected], actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

Future Miniforge releases will NOT build Mambaforge installers. We advise you switch to Miniforge at your earliest convenience. More details at https://conda-forge.org/news/2024/07/29/sunsetting-mambaforge/.

Mamba support is still experimental and can result in differently solved environments!

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: conda-incubator/[email protected], actions-rs/toolchain@v1, actions/upload-artifact@v3. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

Future Miniforge releases will NOT build Mambaforge installers. We advise you switch to Miniforge at your earliest convenience. More details at https://conda-forge.org/news/2024/07/29/sunsetting-mambaforge/.

Mamba support is still experimental and can result in differently solved environments!

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: conda-incubator/[email protected], actions-rs/toolchain@v1, actions/upload-artifact@v3. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

Future Miniforge releases will NOT build Mambaforge installers. We advise you switch to Miniforge at your earliest convenience. More details at https://conda-forge.org/news/2024/07/29/sunsetting-mambaforge/.

Mamba support is still experimental and can result in differently solved environments!

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: conda-incubator/[email protected], actions-rs/toolchain@v1, actions/upload-artifact@v3. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

Mambaforge is now deprecated! Future Miniforge releases will NOT build Mambaforge installers. We advise you switch to Miniforge at your earliest convenience. More details at https://conda-forge.org/news/2024/07/29/sunsetting-mambaforge/. If you require Mambaforge, you may pin your installer to one found in https://github.com/conda-forge/miniforge/releases/tag/24.7.1-0

'powershell' is not recognized as an internal or external command, operable program or batch file.

'powershell' is not recognized as an internal or external command, operable program or batch file.

WARNING conda.activate:native_path_to_unix(1034): cygpath is not available, fallback to manual path conversion

WARNING conda.activate:native_path_to_unix(1034): cygpath is not available, fallback to manual path conversion

WARNING conda.activate:native_path_to_unix(1034): cygpath is not available, fallback to manual path conversion

WARNING conda.activate:native_path_to_unix(1034): cygpath is not available, fallback to manual path conversion

WARNING conda.activate:native_path_to_unix(1034): cygpath is not available, fallback to manual path conversion

Mamba support is still experimental and can result in differently solved environments!

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: conda-incubator/[email protected], actions-rs/toolchain@v1, actions/upload-artifact@v3. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

Mambaforge is now deprecated! Future Miniforge releases will NOT build Mambaforge installers. We advise you switch to Miniforge at your earliest convenience. More details at https://conda-forge.org/news/2024/07/29/sunsetting-mambaforge/. If you require Mambaforge, you may pin your installer to one found in https://github.com/conda-forge/miniforge/releases/tag/24.7.1-0

'powershell' is not recognized as an internal or external command, operable program or batch file.

'powershell' is not recognized as an internal or external command, operable program or batch file.

WARNING conda.activate:native_path_to_unix(1034): cygpath is not available, fallback to manual path conversion

WARNING conda.activate:native_path_to_unix(1034): cygpath is not available, fallback to manual path conversion

WARNING conda.activate:native_path_to_unix(1034): cygpath is not available, fallback to manual path conversion

WARNING conda.activate:native_path_to_unix(1034): cygpath is not available, fallback to manual path conversion

WARNING conda.activate:native_path_to_unix(1034): cygpath is not available, fallback to manual path conversion

Mamba support is still experimental and can result in differently solved environments!

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: conda-incubator/[email protected], actions-rs/toolchain@v1, actions/upload-artifact@v3. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

Mambaforge is now deprecated! Future Miniforge releases will NOT build Mambaforge installers. We advise you switch to Miniforge at your earliest convenience. More details at https://conda-forge.org/news/2024/07/29/sunsetting-mambaforge/. If you require Mambaforge, you may pin your installer to one found in https://github.com/conda-forge/miniforge/releases/tag/24.7.1-0

'powershell' is not recognized as an internal or external command, operable program or batch file.

'powershell' is not recognized as an internal or external command, operable program or batch file.

WARNING conda.activate:native_path_to_unix(1034): cygpath is not available, fallback to manual path conversion

WARNING conda.activate:native_path_to_unix(1034): cygpath is not available, fallback to manual path conversion

WARNING conda.activate:native_path_to_unix(1034): cygpath is not available, fallback to manual path conversion

WARNING conda.activate:native_path_to_unix(1034): cygpath is not available, fallback to manual path conversion

WARNING conda.activate:native_path_to_unix(1034): cygpath is not available, fallback to manual path conversion

Mamba support is still experimental and can result in differently solved environments!

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions use a deprecated Node.js version and will be forced to run on node20: actions/download-artifact@v3, actions/github-script@v6. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/