RigC (pronounced Rigsy) is a set of Python scripts and modules to configure an NDI encoder and a multiviewer. RigC is meant to be strapped into OBS and apply a configuration for the two devices when a broadcaster switch scenes. Many of the parameters of the two devices are supported for configuring the stream and may run locally over a serial port or a remote socket on a serial gateway. Why RigC? See the background story.
The rigc.py script is supposed to be embedded in OBS. See the installation section. There's a CLI to help iterate faster on profile configurations.
./cli.py --help
Usage: cli.py [OPTIONS]
Options:
--config PATH config.yaml formatted file
--profile TEXT Profile name in --config
--mbps INTEGER Throttle encoder bitrate to Mbit/s, overrides bitrate in
`encoder` sections in --config. Use with caution.
--debug Turn on very verbose logging and override --config flag.
--help Show this message and exit.
Example configuration file.
# Orei multi-viewer commands
# https://cdn.shopify.com/s/files/1/1988/4253/files/UHD-401MV-Updated_User_Manual.pdf?v=1672745852
# Magewell encoder API
# https://www.magewell.com/api-docs/pro-convert-encoder-api/
---
config:
local:
serial_port: /dev/cu.usbserial-3
# set to true to ignore encoder when local serial is connected
ignore_encoder: true
debug: true
mv:
ip_addr: 192.168.37.5
remote_timeout: 2.0 # Positive float timeout in seconds for IP-based command
# If null is given, the socket is put in blocking mode
command_delay: .1 # Positive float delay after sending a MV command
# Tune this if timeouts are being hit on quad layouts
modes:
3840x2160p60: 3
3840x2160p30: 5
1920x1080p60: 8
scenes:
single: 1
pip: 2 # Not tested
pbp: 3 # Not tested
triple: 4
quad: 5
encoder:
ip_addr: 192.168.37.4
user: Admin
# md5 of your password (this is Admin)
pass: e3afed0047b08059d0fada10f400c1e5
profiles:
default:
mv:
# Keyed from with config.mv.scenes
scene: quad
# Keyed from with config.mv.modes
output: 3840x2160p60
# Consume key (HDMI input) and put in value (Multi-Viewer viewport)
layout:
HDMI-1: 1
HDMI-2: 2
HDMI-3: 3
HDMI-4: 4
audio: 3
encoder:
# 50 - 200 "quality" slider, default is 100, ignored when --mbps is used
bitrate: 100
# frame rate, raw matches input, half, one-third, quarter are valid
framerate: raw
# 1920x1080 etc, raw means match input
resolution: raw
player:
mv:
# Keyed from with config.mv.scenes
scene: single
# Keyed from with config.mv.modes
output: 3840x2160p60
# Consume key (HDMI input) with value (viewport output)
layout:
HDMI-2: 1
audio: 3
encoder:
# 50 - 200
bitrate: 200
# frame rate, raw matches input, half, one-third, quarter are valid
framerate: raw
# 1920x1080 etc, raw means match input
resolution: 1920x1080RigC has been developed on a Mac and will most likely just work on Mac and Linux at this time.
- Python scripting needs to be activated in OBS (find instructions for this elsewhere)
- HDCP needs to be disabled on the multiviewer prior use with a capture card
Reports of devices working with RigC are welcomed.
These share the same MCU on paper.
- OREI UHD-401MV (Works 100%)
- Monoprice Blackbird Pro Series 4K60 Multiviewer (not tested)
- NEUVIDEO 4x1 4K60 UHD Quad/PiP/PoP Multiviewer (not tested)
Any serial server that expose the serial interface over Telnet (port 23) should work.
These are the ones I've gone through.
- PUSR USR-TCP232-410s
- This device puts itself to sleep and needs a perpetual
pingagainst it to keep it alive. I have a support ticket open asking for a firmware update etc.
- This device puts itself to sleep and needs a perpetual
- StarTech NETRS2321P
- Works out of the box without any configuration except setting an IP address.
Magewell Pro Converters all have the same API. The Ultra Encode series would need work.
- Magewell Pro Convert HDMI 4K Plus (Works 100%)
- Magewell Pro Convert HDMI Plus
- Magewell Pro Convert HDMI TX
- Magewell Pro Convert 12G SDI 4K Plus
- Magewell Pro Convert SDI 4K Plus
- Magewell Pro Convert SDI Plus
- Magewell Pro Convert SDI TX
A short snippet that describes the benefit of using 4K cameras in single view modes.
The provided configuration example should be self-explanatory. Copy config.yaml-dist to a new file and load it up in OBS.
This section is work in progress.
It's recommended to install a new Python virtual environment.
env PYTHON_CONFIGURE_OPTS="--enable-framework" pyenv install 3.11.4
export PATH=~/.pyenv/versions/3.11.4/bin:${PATH}
Clone this repo into a directory accessible by OBS.
git clone http://github.com/datamattsson/rigc
cd rigc
pip install -y requirements.txt
# (Optional) check to see if RigC will compile in your Python environment
find . -name '*.py' | xargs python -m py_compile
Go to Tools -> Scripts -> Python Settings, select the Python virtual environment prescribed above.
Next, hit that + sign and find rigc.py in the rigc repository.
Please use issues to report potential issues and ask questions.
In the world of pinball streaming you are dependent of having at least three cameras capturing talent, playfield and score boards wirelessly in a very confined space. A multiviewer is a great device to ingest HDMI signals and output a "grid" of inputs to OBS. The principal caveat of using such a solution is that the input will be a quarter of the original resolution and there is some loss of quality when working with 1080p60 if scaling is involved (I.e stretching 960 to 1080 for the playfield camera). The most common adapted solution is to run one wireless HDMI transmitter/receiver pair per camera but it comes with its own set of challenges.
The idea of RigC came from both the limitations and possibilities of the Magewell Director Mini. A need to have a remotely controlled multiviewer with 2160p60 capabilities and by using an NDI encoder, those needs could be met. It gives the operator very granular control over bitrate, framerate and resolutions when bandwidth is scarce and yield superior quality when there's an abundance of bandwidth.
Running full NDI over WiFi is considered by industry professionals the dumbest idea ever but tests have shown that the Magewell encoder may encode at 550Mbit/s on WiFi6 when the air is good. Full NDI 2160p60 is advertised at 250Mbit/s but the Magewell encoder have a bitrate slider to increase the quality for the cost of bandwidth. Since the WiFi is isolated and only run a single NDI stream, it's less of an issue with congestion. Further, you can throw any WiFi bridge solution on this problem, less so with a purpose built HDMI transmitter/receiver.
A purpose built 2160p60 wireless HDMI transmitter/receiver product from Teradek cost $6,490 last time I checked. RigC is the solution until competition has caught up with Teradek to make 2160p60 wireless affordable and feasible for pinball streaming, RigC costs about a third and is way more flexible than a dedicated 2160p60 transmitter/receiver.
RigC is available under the MIT license.
Contributions to this repository are welcomed.
You can support this project by visiting linktr.ee/dri374 and get some schwag from the shop or donate through Patreon or PayPal.
Copyright 2024 Michael Mattsson. Derived work of josephsamela/obs-scene-execute-command-scripts. Copyright 2022 Joe Samela.
