sma-em-measurement.py: Python3 loop display SMA Energymeter measurement values
sma-daemon.py: Python3 daemon writing consume and supply values to /run/shm/em-[serial]-[value]
# HINT #
Sma homemanager version 2.3.4R added 8 Byte of measurement data.
This version trys to detect the measurement values on obis ids, so it should be save if new values were added or removed.
python3 sys time configparser (SafeConfigParser) signal
create a config file in /etc/smaemd/config
Use UTF-8 encoded configfile
Example:
[SMA-EM]
# serials of sma-ems the daemon should take notice
# seperated by space
serials=123456 1900204522
# features could filter serials to, but wouldn't see serials if these serials was not defines in SMA-EM serials
# list of features to load/run
features=simplefswriter sample
[DAEMON]
pidfile=/run/smaemd.pid
# listen on an interface with the given ip
# use 0.0.0.0 for any interface
ipbind=192.168.8.15
# multicast ip and port of sma-datagrams
# defaults
mcastgrp=239.12.255.254
mcastport=9522
# each feature/plugin has its own section
# called FEATURE-[featurename]
# the feature section is required if a feature is listed in [SMA-EM]features
[FEATURE-simplefswriter]
# list serials simplefswriter notice
serials=1900204522
# measurement vars simplefswriter should write to filesystem (only from smas with serial in serials)
values=pconsume psupply qsupply ssupply
[FEATURE-sample]
nothing=here
maybe you have to add a route (example: on hosts with more than one interface)
sudo ip route add 224.0.0.0/4 dev interfacename
apt install git
apt install python3 cl-py-configparser
mkdir /opt/smaemd/
mkdir /etc/smaemd/
cd /opt/smaemd/
git clone https://github.com/datenschuft/SMA-EM.git .
cp systemd-settings /etc/systemd/system/smaemd.service
create a /etc/smaemd/config - file (see example above)
update systemd
systemctl daemon-reload
systemctl enable smaemd.service
systemctl start smaemd.service
feel lucky and read /run/shm/em--
sma-em-capture-package - trys to capture a SMA-EM or SMA-homemanager Datagram and display hex and ascii package-info and all recogniced measurement values. Cloud be helpful on package/software changes.