Install build-essential gfortran #478
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| name: Build image, lint, and run tests | |
| on: | |
| push: | |
| pull_request: | |
| branches: ["master"] | |
| jobs: | |
| build: | |
| runs-on: ubuntu-latest | |
| strategy: | |
| matrix: | |
| python-version: [3.12] | |
| steps: | |
| - uses: actions/checkout@v4 | |
| - name: Set up Python ${{ matrix.python-version }} | |
| uses: actions/setup-python@v5 | |
| with: | |
| python-version: ${{ matrix.python-version }} | |
| - name: Install Python dependencies | |
| run: | | |
| python -m pip install uv | |
| python -m uv venv | |
| python -m uv pip install .[test] | |
| - name: Lint with ruff | |
| run: | | |
| source .venv/bin/activate | |
| ruff check . | |
| - name: Test with pytest | |
| run: | | |
| source .venv/bin/activate | |
| pytest | |
| build_tmp: | |
| runs-on: ubuntu-latest | |
| steps: | |
| - uses: pguyot/arm-runner-action@v2 | |
| id: build_image | |
| with: | |
| base_image: https://downloads.raspberrypi.com/raspios_armhf/images/raspios_armhf-2024-03-15/2024-03-15-raspios-bookworm-armhf.img.xz | |
| bootpartition: 1 | |
| rootpartition: 2 | |
| image_additional_mb: 4000 | |
| commands: | | |
| ls | |
| - name: Compress the release image | |
| run: | | |
| sudo fdisk -l | |
| sudo ls /etc/xdg/autostart/ | |
| mv ${{ steps.build_image.outputs.image }} go-note-go.img | |
| xz -0 -T 0 -v go-note-go.img | |
| - name: Upload release image | |
| uses: actions/upload-artifact@v4 | |
| with: | |
| name: Release image | |
| path: go-note-go.img.xz | |
| build_image: | |
| runs-on: ubuntu-latest | |
| steps: | |
| - uses: pguyot/arm-runner-action@v2 | |
| id: build_image | |
| with: | |
| base_image: https://downloads.raspberrypi.com/raspios_armhf/images/raspios_armhf-2024-03-15/2024-03-15-raspios-bookworm-armhf.img.xz | |
| bootpartition: 1 | |
| rootpartition: 2 | |
| image_additional_mb: 4000 | |
| commands: | | |
| echo "Updating!" | |
| sudo apt update | |
| echo "Installing dependencies!" | |
| sudo apt install -y git firefox-esr xvfb portaudio19-dev libatlas-base-dev redis-server \ | |
| espeak rustc python3-dev libopenblas-dev iptables iptables-persistent cmake autoconf \ | |
| build-essential gfortran | |
| echo "Installing Go Note Go!" | |
| mkdir -p /home/pi/code/github/dbieber | |
| cd /home/pi/code/github/dbieber | |
| git clone https://github.com/dbieber/GoNoteGo.git | |
| cd GoNoteGo | |
| # Checkout the specific commit | |
| git checkout $GITHUB_SHA | |
| echo "Setting up Python environment" | |
| python3 -m venv .venv | |
| ./.venv/bin/pip install uv | |
| ./.venv/bin/python3 -m uv pip install -e . # Install Python dependencies | |
| echo "Start on boot" | |
| sudo cat /etc/rc.local | |
| sudo sed '/^exit 0/i \ | |
| sudo -u pi mkdir -p /home/pi/out \ | |
| bash /home/pi/code/github/dbieber/GoNoteGo/scripts/install_settings.sh \ | |
| /home/pi/code/github/dbieber/GoNoteGo/.venv/bin/supervisord -c /home/pi/code/github/dbieber/GoNoteGo/gonotego/supervisord.conf \ | |
| ' /etc/rc.local > ./rc.local.modified && sudo mv ./rc.local.modified /etc/rc.local | |
| sudo chmod +x /etc/rc.local | |
| echo "Setting up Go Note Go:" | |
| cp gonotego/settings/secure_settings_template.py gonotego/settings/secure_settings.py | |
| echo "Manually edit secure_settings.py to configure your settings." | |
| mkdir /home/pi/secrets | |
| echo "Manually transfer secrets to /home/pi/secrets." | |
| echo "Install geckodriver to known location" | |
| cd | |
| wget https://github.com/mozilla/geckodriver/releases/download/v0.23.0/geckodriver-v0.23.0-arm7hf.tar.gz | |
| tar -xvf geckodriver-v0.23.0-arm7hf.tar.gz | |
| rm geckodriver-v0.23.0-arm7hf.tar.gz | |
| sudo mv geckodriver /usr/local/bin | |
| echo "Set up a wifi access point" | |
| sudo apt install -y rng-tools hostapd dnsmasq | |
| cat <<EOF > /etc/dhcpcd.conf | |
| # Allow users of this group to interact with dhcpcd via the control socket. | |
| #controlgroup wheel | |
| # Inform the DHCP server of our hostname for DDNS. | |
| hostname | |
| # Use the hardware address of the interface for the Client ID. | |
| clientid | |
| # or | |
| # Use the same DUID + IAID as set in DHCPv6 for DHCPv4 ClientID as per RFC4361. | |
| # Some non-RFC compliant DHCP servers do not reply with this set. | |
| # In this case, comment out duid and enable clientid above. | |
| #duid | |
| # Persist interface configuration when dhcpcd exits. | |
| persistent | |
| # Rapid commit support. | |
| # Safe to enable by default because it requires the equivalent option set | |
| # on the server to actually work. | |
| option rapid_commit | |
| # A list of options to request from the DHCP server. | |
| option domain_name_servers, domain_name, domain_search, host_name | |
| option classless_static_routes | |
| # Respect the network MTU. This is applied to DHCP routes. | |
| option interface_mtu | |
| # Most distributions have NTP support. | |
| #option ntp_servers | |
| # A ServerID is required by RFC2131. | |
| require dhcp_server_identifier | |
| # Generate SLAAC address using the Hardware Address of the interface | |
| #slaac hwaddr | |
| # OR generate Stable Private IPv6 Addresses based from the DUID | |
| slaac private | |
| # Example static IP configuration: | |
| #interface eth0 | |
| #static ip_address=192.168.0.10/24 | |
| #static ip6_address=fd51:42f8:caae:d92e::ff/64 | |
| #static routers=192.168.0.1 | |
| #static domain_name_servers=192.168.0.1 8.8.8.8 fd51:42f8:caae:d92e::1 | |
| # It is possible to fall back to a static IP if DHCP fails: | |
| # define static profile | |
| #profile static_eth0 | |
| #static ip_address=192.168.1.23/24 | |
| #static routers=192.168.1.1 | |
| #static domain_name_servers=192.168.1.1 | |
| # fallback to static profile on eth0 | |
| #interface eth0 | |
| #fallback static_eth0 | |
| # Interface for Go Note Go Access Point | |
| interface uap0 | |
| static ip_address=192.168.4.1/24 | |
| nohook wpa_supplicant | |
| EOF | |
| cat <<EOF >> /etc/dnsmasq.conf | |
| interface=uap0 | |
| dhcp-range=192.168.4.2,192.168.4.20,255.255.255.0,24h | |
| EOF | |
| cat <<EOF >> /etc/systemd/system/uap0.service | |
| [Unit] | |
| Description=Create uap0 interface | |
| After=sys-subsystem-net-devices-wlan0.device | |
| [Service] | |
| Type=oneshot | |
| RemainAfterExit=true | |
| ExecStart=/sbin/iw phy phy0 interface add uap0 type __ap | |
| ExecStartPost=/usr/bin/ip link set dev uap0 address d8:3a:dd:06:5e:ca | |
| ExecStartPost=/sbin/ifconfig uap0 up | |
| ExecStop=/sbin/iw dev uap0 del | |
| [Install] | |
| WantedBy=multi-user.target | |
| EOF | |
| sudo systemctl daemon-reload | |
| sudo systemctl start uap0.service | |
| sudo systemctl enable uap0.service | |
| cat <<EOF >> /etc/hostapd/hostapd.conf | |
| interface=uap0 | |
| ssid=GoNoteGo-Wifi | |
| hw_mode=g | |
| channel=4 | |
| wmm_enabled=0 | |
| macaddr_acl=0 | |
| auth_algs=1 | |
| ignore_broadcast_ssid=0 | |
| wpa=2 | |
| wpa_passphrase=swingset | |
| wpa_key_mgmt=WPA-PSK | |
| wpa_pairwise=TKIP | |
| rsn_pairwise=CCMP | |
| EOF | |
| cat <<EOF >> /etc/default/hostapd | |
| DAEMON_CONF="/etc/hostapd/hostapd.conf" | |
| EOF | |
| sudo systemctl start hostapd | |
| sudo systemctl start dnsmasq | |
| sudo systemctl enable hostapd | |
| sudo systemctl enable dnsmasq | |
| cat <<EOF >> /etc/sysctl.conf | |
| net.ipv4.ip_forward=1 | |
| EOF | |
| # Attempt to not run config on first boot | |
| sudo apt purge piwiz -y | |
| sudo raspi-config nonint do_wifi_country US | |
| touch /boot/ssh | |
| echo "pi:$(echo 'raspberry' | openssl passwd -6 -stdin)" | sudo tee /boot/userconf > /dev/null | |
| # Enable ssh | |
| ssh-keygen -A && | |
| update-rc.d ssh enable | |
| # Add commands to the bash history for debugging purposes | |
| cat << EOF >> /home/pi/.bash_history | |
| sudo reboot now | |
| sudo systemctl daemon-reload | |
| sudo systemctl status uap0.service | |
| sudo systemctl status dnsmasq.service | |
| sudo systemctl status hostapd.service | |
| sudo journalctl -u uap0.service | |
| sudo journalctl -u dnsmasq.service | |
| sudo journalctl -u hostapd.service | |
| ip addr show uap0 | |
| sudo ip addr add 192.168.4.1/24 dev uap0 | |
| cat /etc/rc.local | |
| cat /etc/default/hostapd | |
| cat /etc/hostapd/hostapd.conf | |
| cat /etc/systemd/system/uap0.service | |
| cat /etc/sysctl.conf | |
| cat /etc/dhcpcd.conf | |
| cat /etc/dnsmasq.conf | |
| python -m http.server | |
| python3 -m http.server | |
| sudo iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE | |
| sudo iptables -t nat -L | |
| sudo cat /etc/wpa_supplicant/wpa_supplicant.conf | |
| sudo nano /etc/wpa_supplicant/wpa_supplicant.conf | |
| nano /home/pi/code/github/dbieber/GoNoteGo/gonotego/settings/secure_settings.py | |
| /home/pi/code/github/dbieber/GoNoteGo/.venv/bin/python | |
| /home/pi/code/github/dbieber/GoNoteGo/.venv/bin/supervisord -c /home/pi/code/github/dbieber/GoNoteGo/gonotego/supervisord.conf | |
| /home/pi/code/github/dbieber/GoNoteGo/.venv/bin/supervisorctl -u go -p notego status | |
| /home/pi/code/github/dbieber/GoNoteGo/.venv/bin/supervisorctl -u go -p notego restart all | |
| cd /home/pi/code/github/dbieber/GoNoteGo/ | |
| EOF | |
| - name: Compress the release image | |
| run: | | |
| sudo fdisk -l | |
| sudo ls /etc/xdg/autostart/ | |
| mv ${{ steps.build_image.outputs.image }} go-note-go.img | |
| xz -0 -T 0 -v go-note-go.img | |
| - name: Upload release image | |
| uses: actions/upload-artifact@v4 | |
| with: | |
| name: Release image | |
| path: go-note-go.img.xz |