Skip to content

Commit

Permalink
New component: ADE7880 voltage/current/power/energy sensor (esphome#5242
Browse files Browse the repository at this point in the history 
)
  • Loading branch information
@kpfleming
kpfleming authored Feb 19, 2024
1 parent 5d144cf commit edd1678
Show file tree
Hide file tree
Showing 16 changed files with 1,285 additions and 0 deletions.
1 change: 1 addition & 0 deletions CODEOWNERS
View file
Original file line number Diff line number Diff line change
Expand Up @@ -18,6 +18,7 @@ esphome/components/ac_dimmer/* @glmnet
esphome/components/adc/* @esphome/core
esphome/components/adc128s102/* @DeerMaximum
esphome/components/addressable_light/* @justfalter
esphome/components/ade7880/* @kpfleming
esphome/components/ade7953/* @angelnu
esphome/components/ade7953_i2c/* @angelnu
esphome/components/ade7953_spi/* @angelnu
Expand Down
1 change: 1 addition & 0 deletions esphome/components/ade7880/__init__.py
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1 @@
CODEOWNERS = ["@kpfleming"]
302 changes: 302 additions & 0 deletions esphome/components/ade7880/ade7880.cpp
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,302 @@
// This component was developed using knowledge gathered by a number
// of people who reverse-engineered the Shelly 3EM:
//
// @AndreKR on GitHub
// Axel (@Axel830 on GitHub)
// Marko (@goodkiller on GitHub)
// Michaël Piron (@michaelpiron on GitHub)
// Theo Arends (@arendst on GitHub)

#include "ade7880.h"
#include "ade7880_registers.h"
#include "esphome/core/log.h"

namespace esphome {
namespace ade7880 {

static const char *const TAG = "ade7880";

void IRAM_ATTR ADE7880Store::gpio_intr(ADE7880Store *arg) { arg->reset_done = true; }

void ADE7880::setup() {
if (this->irq0_pin_ != nullptr) {
this->irq0_pin_->setup();
}
this->irq1_pin_->setup();
if (this->reset_pin_ != nullptr) {
this->reset_pin_->setup();
}
this->store_.irq1_pin = this->irq1_pin_->to_isr();
this->irq1_pin_->attach_interrupt(ADE7880Store::gpio_intr, &this->store_, gpio::INTERRUPT_FALLING_EDGE);

// if IRQ1 is already asserted, the cause must be determined
if (this->irq1_pin_->digital_read() == 0) {
ESP_LOGD(TAG, "IRQ1 found asserted during setup()");
auto status1 = read_u32_register16_(STATUS1);
if ((status1 & ~STATUS1_RSTDONE) != 0) {
// not safe to proceed, must initiate reset
ESP_LOGD(TAG, "IRQ1 asserted for !RSTDONE, resetting device");
this->reset_device_();
return;
}
if ((status1 & STATUS1_RSTDONE) == STATUS1_RSTDONE) {
// safe to proceed, device has just completed reset cycle
ESP_LOGD(TAG, "Acknowledging RSTDONE");
this->write_u32_register16_(STATUS0, 0xFFFF);
this->write_u32_register16_(STATUS1, 0xFFFF);
this->init_device_();
return;
}
}

this->reset_device_();
}

void ADE7880::loop() {
// check for completion of a reset cycle
if (!this->store_.reset_done) {
return;
}

ESP_LOGD(TAG, "Acknowledging RSTDONE");
this->write_u32_register16_(STATUS0, 0xFFFF);
this->write_u32_register16_(STATUS1, 0xFFFF);
this->init_device_();
this->store_.reset_done = false;
this->store_.reset_pending = false;
}

template<typename F>
void ADE7880::update_sensor_from_s24zp_register16_(sensor::Sensor *sensor, uint16_t a_register, F &&f) {
if (sensor == nullptr) {
return;
}

float val = this->read_s24zp_register16_(a_register);
sensor->publish_state(f(val));
}

template<typename F>
void ADE7880::update_sensor_from_s16_register16_(sensor::Sensor *sensor, uint16_t a_register, F &&f) {
if (sensor == nullptr) {
return;
}

float val = this->read_s16_register16_(a_register);
sensor->publish_state(f(val));
}

template<typename F>
void ADE7880::update_sensor_from_s32_register16_(sensor::Sensor *sensor, uint16_t a_register, F &&f) {
if (sensor == nullptr) {
return;
}

float val = this->read_s32_register16_(a_register);
sensor->publish_state(f(val));
}

void ADE7880::update() {
if (this->store_.reset_pending) {
return;
}

auto start = millis();

if (this->channel_n_ != nullptr) {
auto *chan = this->channel_n_;
this->update_sensor_from_s24zp_register16_(chan->current, NIRMS, [](float val) { return val / 100000.0f; });
}

if (this->channel_a_ != nullptr) {
auto *chan = this->channel_a_;
this->update_sensor_from_s24zp_register16_(chan->current, AIRMS, [](float val) { return val / 100000.0f; });
this->update_sensor_from_s24zp_register16_(chan->voltage, BVRMS, [](float val) { return val / 10000.0f; });
this->update_sensor_from_s24zp_register16_(chan->active_power, AWATT, [](float val) { return val / 100.0f; });
this->update_sensor_from_s24zp_register16_(chan->apparent_power, AVA, [](float val) { return val / 100.0f; });
this->update_sensor_from_s16_register16_(chan->power_factor, APF,
[](float val) { return std::abs(val / -327.68f); });
this->update_sensor_from_s32_register16_(chan->forward_active_energy, AFWATTHR, [&chan](float val) {
return chan->forward_active_energy_total += val / 14400.0f;
});
this->update_sensor_from_s32_register16_(chan->reverse_active_energy, AFWATTHR, [&chan](float val) {
return chan->reverse_active_energy_total += val / 14400.0f;
});
}

if (this->channel_b_ != nullptr) {
auto *chan = this->channel_b_;
this->update_sensor_from_s24zp_register16_(chan->current, BIRMS, [](float val) { return val / 100000.0f; });
this->update_sensor_from_s24zp_register16_(chan->voltage, BVRMS, [](float val) { return val / 10000.0f; });
this->update_sensor_from_s24zp_register16_(chan->active_power, BWATT, [](float val) { return val / 100.0f; });
this->update_sensor_from_s24zp_register16_(chan->apparent_power, BVA, [](float val) { return val / 100.0f; });
this->update_sensor_from_s16_register16_(chan->power_factor, BPF,
[](float val) { return std::abs(val / -327.68f); });
this->update_sensor_from_s32_register16_(chan->forward_active_energy, BFWATTHR, [&chan](float val) {
return chan->forward_active_energy_total += val / 14400.0f;
});
this->update_sensor_from_s32_register16_(chan->reverse_active_energy, BFWATTHR, [&chan](float val) {
return chan->reverse_active_energy_total += val / 14400.0f;
});
}

if (this->channel_c_ != nullptr) {
auto *chan = this->channel_c_;
this->update_sensor_from_s24zp_register16_(chan->current, CIRMS, [](float val) { return val / 100000.0f; });
this->update_sensor_from_s24zp_register16_(chan->voltage, CVRMS, [](float val) { return val / 10000.0f; });
this->update_sensor_from_s24zp_register16_(chan->active_power, CWATT, [](float val) { return val / 100.0f; });
this->update_sensor_from_s24zp_register16_(chan->apparent_power, CVA, [](float val) { return val / 100.0f; });
this->update_sensor_from_s16_register16_(chan->power_factor, CPF,
[](float val) { return std::abs(val / -327.68f); });
this->update_sensor_from_s32_register16_(chan->forward_active_energy, CFWATTHR, [&chan](float val) {
return chan->forward_active_energy_total += val / 14400.0f;
});
this->update_sensor_from_s32_register16_(chan->reverse_active_energy, CFWATTHR, [&chan](float val) {
return chan->reverse_active_energy_total += val / 14400.0f;
});
}

ESP_LOGD(TAG, "update took %u ms", millis() - start);
}

void ADE7880::dump_config() {
ESP_LOGCONFIG(TAG, "ADE7880:");
LOG_PIN(" IRQ0 Pin: ", this->irq0_pin_);
LOG_PIN(" IRQ1 Pin: ", this->irq1_pin_);
LOG_PIN(" RESET Pin: ", this->reset_pin_);
ESP_LOGCONFIG(TAG, " Frequency: %.0f Hz", this->frequency_);

if (this->channel_a_ != nullptr) {
ESP_LOGCONFIG(TAG, " Phase A:");
LOG_SENSOR(" ", "Current", this->channel_a_->current);
LOG_SENSOR(" ", "Voltage", this->channel_a_->voltage);
LOG_SENSOR(" ", "Active Power", this->channel_a_->active_power);
LOG_SENSOR(" ", "Apparent Power", this->channel_a_->apparent_power);
LOG_SENSOR(" ", "Power Factor", this->channel_a_->power_factor);
LOG_SENSOR(" ", "Forward Active Energy", this->channel_a_->forward_active_energy);
LOG_SENSOR(" ", "Reverse Active Energy", this->channel_a_->reverse_active_energy);
ESP_LOGCONFIG(TAG, " Calibration:");
ESP_LOGCONFIG(TAG, " Current: %u", this->channel_a_->current_gain_calibration);
ESP_LOGCONFIG(TAG, " Voltage: %d", this->channel_a_->voltage_gain_calibration);
ESP_LOGCONFIG(TAG, " Power: %d", this->channel_a_->power_gain_calibration);
ESP_LOGCONFIG(TAG, " Phase Angle: %u", this->channel_a_->phase_angle_calibration);
}

if (this->channel_b_ != nullptr) {
ESP_LOGCONFIG(TAG, " Phase B:");
LOG_SENSOR(" ", "Current", this->channel_b_->current);
LOG_SENSOR(" ", "Voltage", this->channel_b_->voltage);
LOG_SENSOR(" ", "Active Power", this->channel_b_->active_power);
LOG_SENSOR(" ", "Apparent Power", this->channel_b_->apparent_power);
LOG_SENSOR(" ", "Power Factor", this->channel_b_->power_factor);
LOG_SENSOR(" ", "Forward Active Energy", this->channel_b_->forward_active_energy);
LOG_SENSOR(" ", "Reverse Active Energy", this->channel_b_->reverse_active_energy);
ESP_LOGCONFIG(TAG, " Calibration:");
ESP_LOGCONFIG(TAG, " Current: %u", this->channel_b_->current_gain_calibration);
ESP_LOGCONFIG(TAG, " Voltage: %d", this->channel_b_->voltage_gain_calibration);
ESP_LOGCONFIG(TAG, " Power: %d", this->channel_b_->power_gain_calibration);
ESP_LOGCONFIG(TAG, " Phase Angle: %u", this->channel_b_->phase_angle_calibration);
}

if (this->channel_c_ != nullptr) {
ESP_LOGCONFIG(TAG, " Phase C:");
LOG_SENSOR(" ", "Current", this->channel_c_->current);
LOG_SENSOR(" ", "Voltage", this->channel_c_->voltage);
LOG_SENSOR(" ", "Active Power", this->channel_c_->active_power);
LOG_SENSOR(" ", "Apparent Power", this->channel_c_->apparent_power);
LOG_SENSOR(" ", "Power Factor", this->channel_c_->power_factor);
LOG_SENSOR(" ", "Forward Active Energy", this->channel_c_->forward_active_energy);
LOG_SENSOR(" ", "Reverse Active Energy", this->channel_c_->reverse_active_energy);
ESP_LOGCONFIG(TAG, " Calibration:");
ESP_LOGCONFIG(TAG, " Current: %u", this->channel_c_->current_gain_calibration);
ESP_LOGCONFIG(TAG, " Voltage: %d", this->channel_c_->voltage_gain_calibration);
ESP_LOGCONFIG(TAG, " Power: %d", this->channel_c_->power_gain_calibration);
ESP_LOGCONFIG(TAG, " Phase Angle: %u", this->channel_c_->phase_angle_calibration);
}

if (this->channel_n_ != nullptr) {
ESP_LOGCONFIG(TAG, " Neutral:");
LOG_SENSOR(" ", "Current", this->channel_n_->current);
ESP_LOGCONFIG(TAG, " Calibration:");
ESP_LOGCONFIG(TAG, " Current: %u", this->channel_n_->current_gain_calibration);
}

LOG_I2C_DEVICE(this);
LOG_UPDATE_INTERVAL(this);
}

void ADE7880::calibrate_s10zp_reading_(uint16_t a_register, int16_t calibration) {
if (calibration == 0) {
return;
}

this->write_s10zp_register16_(a_register, calibration);
}

void ADE7880::calibrate_s24zpse_reading_(uint16_t a_register, int32_t calibration) {
if (calibration == 0) {
return;
}

this->write_s24zpse_register16_(a_register, calibration);
}

void ADE7880::init_device_() {
this->write_u8_register16_(CONFIG2, CONFIG2_I2C_LOCK);

this->write_u16_register16_(GAIN, 0);

if (this->frequency_ > 55) {
this->write_u16_register16_(COMPMODE, COMPMODE_DEFAULT | COMPMODE_SELFREQ);
}

if (this->channel_n_ != nullptr) {
this->calibrate_s24zpse_reading_(NIGAIN, this->channel_n_->current_gain_calibration);
}

if (this->channel_a_ != nullptr) {
this->calibrate_s24zpse_reading_(AIGAIN, this->channel_a_->current_gain_calibration);
this->calibrate_s24zpse_reading_(AVGAIN, this->channel_a_->voltage_gain_calibration);
this->calibrate_s24zpse_reading_(APGAIN, this->channel_a_->power_gain_calibration);
this->calibrate_s10zp_reading_(APHCAL, this->channel_a_->phase_angle_calibration);
}

if (this->channel_b_ != nullptr) {
this->calibrate_s24zpse_reading_(BIGAIN, this->channel_b_->current_gain_calibration);
this->calibrate_s24zpse_reading_(BVGAIN, this->channel_b_->voltage_gain_calibration);
this->calibrate_s24zpse_reading_(BPGAIN, this->channel_b_->power_gain_calibration);
this->calibrate_s10zp_reading_(BPHCAL, this->channel_b_->phase_angle_calibration);
}

if (this->channel_c_ != nullptr) {
this->calibrate_s24zpse_reading_(CIGAIN, this->channel_c_->current_gain_calibration);
this->calibrate_s24zpse_reading_(CVGAIN, this->channel_c_->voltage_gain_calibration);
this->calibrate_s24zpse_reading_(CPGAIN, this->channel_c_->power_gain_calibration);
this->calibrate_s10zp_reading_(CPHCAL, this->channel_c_->phase_angle_calibration);
}

// write three default values to data memory RAM to flush the I2C write queue
this->write_s32_register16_(VLEVEL, 0);
this->write_s32_register16_(VLEVEL, 0);
this->write_s32_register16_(VLEVEL, 0);

this->write_u8_register16_(DSPWP_SEL, DSPWP_SEL_SET);
this->write_u8_register16_(DSPWP_SET, DSPWP_SET_RO);
this->write_u16_register16_(RUN, RUN_ENABLE);
}

void ADE7880::reset_device_() {
if (this->reset_pin_ != nullptr) {
ESP_LOGD(TAG, "Reset device using RESET pin");
this->reset_pin_->digital_write(false);
delay(1);
this->reset_pin_->digital_write(true);
} else {
ESP_LOGD(TAG, "Reset device using SWRST command");
this->write_u16_register16_(CONFIG, CONFIG_SWRST);
}
this->store_.reset_pending = true;
}

} // namespace ade7880
} // namespace esphome
Loading

0 comments on commit edd1678

Please sign in to comment.