Stall Warning

Stall Warning

Stall warning is a configurable warning message.

It can be set in Config. Tool.

Just Set the speed that you want MinimOSD-Extra to warn you. It is depending on your units of measurement setting.

If you have set metric, than it will be in Km/h. If you have set imperial, than it will be in mph.

It works this way:

1./ If you have airspeed sensor:

It will refer to your airspeed

2./ If you are not using airspeed sensor, it will refer to your ground speed.

If your speed is less than 4 km/h than it will not show up.