Automatically record external Gear like Sampler, Synth, Groovebox, Rompler etc. by sending MIDI Notes and threshold Input to limit Audiodata by just peaked Signals.
- Set the two Soundcard Inputs which are connected with the two Audio Outputs of the Nord Drum 3P to full left and full right
- Set the Nord Drum 3P Pads Threshold to 5 ( Otherwise it will play unwanted Notes if it is set to 4 or lower )
- Set the two Soundcard Inputs which are connected with the two Audio Outputs of the Nord Drum 3P to 0 dB on your Soundcard
- Set the Main Volume on the Nord Drum 3P to 50 % ( Poti shows to the top ) otherwise there will be Clipping in some Recordings
- Set the two Soundcard Inputs which are connected with the two Audio Outputs of the Nord Drum 3P to +5 dB on your Soundcard
( If you have Issues with low Level on the MOTU make a Factory Reset )
- Push the Setup/PARAM knob until the LCD screen reads "UL Hybrid Setup".
- Turn the Setup/PARAM knob until the LCD reads "Factory Defaults Push [VALUE]". Push the Value knob.
- The LCD screen will read: "Are you sure? Push [VALUE]". Push the Value knob.
- The LCD screen will read: "Initializing", and the LCD screen will return to "METER 48".
- Set the Main Volume on the Nord Drum 3P to 100 % ( Poti fully rotated right )
A1 10 120 0256 00001 ####
- Preset Name
- MIDI Note ( In Case of Clavia Nord Drum 3P, Pad 6 )
- Velocity
- Used Frames
- Peak
- Peak Vizualisation with '#' Char
Todo:
-
Add Scripts to create Native Instruments Kontakt Instruments with the recorded Samples
Unfortunately NI doesn't provide an API for Kontakt so I need to use pywinauto / pyautogui
Update
- This is now possible with NI's Creator Tools