This is a list of items that should be procured. The commentary is summarized below.
| Tools, consumables | Product examples | Examples of suppliers | Reference prices |
|---|---|---|---|
| Soldering iron | White light dial type temperature control soldering iron FX600 | https://www.amazon.co.jp/dp/B006MQD7M4 | 3,900 yen |
| Replacement iron tip | White light tip 2C type T18-C2 | https://www.amazon.co.jp/dp/B004OR7UBM | 478 yen |
| Soldering iron stand | HAKOKO iron stand 633-01 | https://www.amazon.co.jp/dp/B000TGNWCS | 1,680 yen |
| Solder blotter | Sanhayato Solder Shutaro NEO 45W type HSK-300 | https://www.amazon.co.jp/dp/B01FEV2BPG | 4,918 yen |
| Nippers | Engineer Micro Nipper NS-04 | https://www.amazon.co.jp/dp/B000TGJSWG | 1,414 yen |
| Precision screwdriver +0 | Engineer + Precision screwdriver set 6 DM-20 | https://www.amazon.co.jp/dp/B06XXXVPRY | 807 yen |
| Tester | OHM (Ohm Electric) Digital Multi Tester TDB-401 (04-1891) | https://www.amazon.co.jp/dp/B001TVKWWU | 2,543 yen |
| Solder | goot precision printed circuit board solder SD-62 | https://www.amazon.co.jp/dp/B0029LGAMA | 255 yen |
| Equiposhi adhesive two-component mixed type | Cemedine 5 minutes curing epoxy adhesive High Super 5 P15g set CA-188 | https://www.amazon.co.jp/dp/B0036WHO0S | 566 yen |
| Masking tape | Masking tape for 3M Scotch painting 18mm × 18m M40J-18 | https://www.amazon.co.jp/dp/B005JWNJZM | 95 yen |
| Sandpaper | KAKURI Paper File MIX Set, 12 Sheets | https://www.amazon.co.jp/dp/B01ARIEU0A | 436 yen |
| Total | 17,092 yen |
I do not recommend soldering irons from 100 yen shops.
From WEBはんだ付け講座 はじめに・・
Currently, in Japan, soldering irons with no temperature control function are used by the majority of people who solder. These soldering irons have a too high tip temperature of 450-550 ° C. For this reason, most products soldered with this soldering iron will be overheated.
If you don't have much soldering experience or have done it a long time ago, we strongly recommend that you prepare one with temperature control.
Since the conical shape attached to the soldering iron from the beginning hits the target and the point, it is difficult for heat to be transmitted, and solder may be placed due to insufficient heating, so replace it with the 2C tip and heat on the surface It is easy to do it if you can.
Necessary for safely placing the soldering iron.
It is good to have it because it is not necessary when soldering fails.
It is used for cutting board / biscuits, cutting diode legs / pin headers.
Nippers are not recommended for 100 yen shops for the following reasons.
- Sharpness is not so good, and it is difficult to cut the diode feet and pin header.
- Since the blade is not a sword, it cannot be cut
Necessary for problem isolation when keys cannot be entered.
All you need is a conduction mode.
Leaded type is easy to work with.
Since there are no particularly small parts used for SU120, even a 1mm one can work well, but 0.8mm seems to melt the solder easily.
Used for Pro Micro baldness prevention processing.
It is used to fix parts when turning the board over by soldering.