docs: installers renaming changes

docs/connect-field-devices/sensehat-driver.md

@@ -11,7 +11,7 @@ The driver-specific channel configuration contains a single parameter, **resourc
 
 **Note about running on OpenJDK**
 
-If some exceptions reporting `Locked by other application` are visible in the log and the driver fails to start, try switching to the Oracle JVM by installing the `oracle-java8-jdk` package.
+If some exceptions reporting `Locked by other application` are visible in the log and the driver fails to start, try switching to the Oracle JVM by installing the `oracle-java17-jdk` package.
 For more information on the problem, please see [this](https://github.com/eclipse/kura/issues/2098) GitHub issue.
 
 ## Installation

docs/getting-started/install-kura.md

@@ -8,8 +8,8 @@ Eclipse Kura™ is provided using a Debian Linux package. Visit the [Kura do
 
 Several installers can be found on such page, and they fall into one of the following categories:
 
-1. standard installers, like `kura-6.0.0_generic-arm32_installer.deb`; and
-2. installers with suffix **nn**, like `kura-6.0.0_generic-arm32-nn_installer.deb`
+1. standard **kura** installers, like `kura_6.0.0_arm64.deb`; and
+2. installers named **kura-nn**, like `kura-nn_6.0.0_arm64.deb`
 
 Profiles of types (1) ship a Kura version with networking functionalities. In particular, they can be installed on targets with [NetworkManager](https://networkmanager.dev), a commonly available tool for managing Linux networking. Kura leverages this tool for networking functionalities. Refer to the [Kura installers](#kura-installers) section for further information.
 
@@ -26,12 +26,15 @@ Installers of type (2) with the suffix `nn` are **No Networking** profiles that
 A user can deploy Kura on a target system using the installer tailored for the device architecture. The installer file looks like:
 
 ```
-kura-<kura-version>_generic-<arch>_installer.deb/rpm
+kura_<kura-version>_<arch>.deb
 ```
 
-where `<arch>` is one of the **supported architectures**: *x86_64*, *arm32*, and *arm64*. Kura can work on systems that have available the dependencies listed in the [Kura dependencies](#kura-dependencies) section, and that have **at least one** physical ethernet interface.
+where `<arch>` is one of the **supported architectures**: *amd64*, *arm64*, and *armhf*. Kura can work on systems that have available the dependencies listed in the [Kura dependencies](#kura-dependencies) section, and that have **at least one** physical ethernet interface.
+
+From Kura version 6.0.0 the Java 17 runtime is **required** to run the framework correctly.
 
 ### Java Heap Memory Assignment
+
 The Eclipse Kura&trade;'s installer incorporates an adaptive Heap Memory allocation system during installation. The allocation follows a formula based on your gateway's available memory. If your gateway has less than 1024MB of RAM, Kura will set -Xms and -Xmx to 256MB. For gateways with more than 1024MB, one quarter of the total RAM will be assigned to -Xms and -Xmx.
 
 ### Initial network configuration
@@ -97,7 +100,7 @@ To have all the Kura features working, the following dependencies are required:
 - Logs: `logrotate`.
 - Gps: `gpsd`.
 - Python: `python3`.
-- Java: `openjdk-17-jre-headless` or `temurin-17-jdk` or `openjdk-8-jre-headless` or `temurin-8-jdk`.
+- Java: `openjdk-17-jre-headless` or `temurin-17-jdk`.
 - Others: `dos2unix`
 
 ### Reference devices
@@ -106,10 +109,10 @@ Eclipse Kura&trade; has been tested on the following devices and provides full c
 
 | Device | Architecture | OS |
 | - | - | - |
-| **Raspberry Pi 3/4** | *arm32* | Raspberry Pi OS "Bookworm" |
+| **Raspberry Pi 3/4** | *armhf* | Raspberry Pi OS "Bookworm" |
 | **Raspberry Pi 3/4** | *arm64* | Raspberry Pi OS "Bookworm" |
 | **Raspberry Pi 3/4** | *arm64* | Ubuntu 20.04 |
-| **ZimaBoard/Blade** | *x86_64* | TBD |
+| **ZimaBoard/Blade** | *amd64* | TBD |
 | **NVIDIA Jetson AGX Orin&trade;** | *arm64* | TBD |
 
 Check out the quick start guides for the detailed installation steps and set-up procedures:

docs/getting-started/raspberry-pi-raspberryos-quick-start.md

@@ -63,15 +63,15 @@ following steps:
 4. Download the Kura package with:
 
     ```
-    wget http://download.eclipse.org/kura/releases/<version>/kura-<kura-version>_generic-<arch>_installer.deb
+    wget http://download.eclipse.org/kura/releases/<version>/kura-<kura-version>_<arch>.deb
     ```
 
     Note: replace `<version>` in the URL above with the version number of the latest release (e.g. 5.5.0) and `<arch>` with your device architecture 
 
 5. Install Kura with: 
 
     ```
-    sudo apt-get install ./kura-<kura-version>_generic-<arch>_installer.deb
+    sudo apt-get install ./kura-<kura-version>_<arch>.deb
     ```
 
 6. For a correct configuration of the Wlan interface, it is necessary to set the **Locale** and the **WLAN Country** through the `raspi-config` command:

docs/getting-started/raspberry-pi-ubuntu-20-quick-start.md

@@ -59,7 +59,7 @@ following steps:
 4. Download the Kura package with:
 
     ```
-    wget http://download.eclipse.org/kura/releases/<version>/kura-<kura-version>_generic-<arch>_installer.deb
+    wget http://download.eclipse.org/kura/releases/<version>/kura-<kura-version>_<arch>.deb
     ```
 
     Note: replace `<version>` in the URL above with the version number of the latest release (e.g. 5.5.0) and `<arch>` with your device architecture 
@@ -68,7 +68,7 @@ following steps:
 5. Install Kura with:
 
     ```
-    sudo apt install ./kura-<kura-version>_generic-<arch>_installer.deb
+    sudo apt install ./kura-<kura-version>_<arch>_installer.deb
     ```
 
     All the required dependencies will be downloaded and installed.

docs/java-application-development/remote-debugging-on-target-platform.md

@@ -6,9 +6,6 @@ Eclipse Kura can be started with Java Debug Wire Protocol (JDWP) support, allowi
 
 * Start Kura with Java Debug Wire Protocol (JDWP) typing `sudo /opt/eclipse/kura/bin/start_kura_debug.sh`. This will start Kura and open an OSGi console. It will also start listening for socket connections on port 8000.
 
-!!! warning
-    Starting from Java 9, the JDWP socket connector accepts only local connections by default (see [here](https://www.oracle.com/java/technologies/javase/9-notes.html#JDK-8041435) for further details). To enable remote debugging on Java 9, the following line in `/opt/eclipse/kura/bin/start_kura_debug.sh`: <br /><br />-Xdebug -Xrunjdwp:server=y,transport=dt_socket,address=8000,suspend=n &#92;<br><br>has to be replaced with the following one: <br><br>-Xdebug -Xrunjdwp:server=y,transport=dt_socket,address=<b>*:</b>8000,suspend=n &#92;
-
 * Open the tcp port 8000 in the firewall. This can be done through the firewall tab in Kura web interface or using iptables.
 
 * Install your application bundle on the target platform.

docs/references/rest-apis/rest-system-api.md

@@ -260,7 +260,7 @@ Identities with `rest.system` permissions can access these APIs.
         "kura.command.user": "kura",
         "kura.device.name": "raspberry",
         "kura.partNumber": "raspberry",
-        "kura.project": "generic-arm32",
+        "kura.project": "aarch64",
         "kura.company": "EUROTECH",
         "java.home": "/usr/lib/jvm/java-8-openjdk-armhf/jre",
         "version": "5.4.0-SNAPSHOT",
@@ -297,7 +297,7 @@ Identities with `rest.system` permissions can access these APIs.
         "java.vm.info": "mixed mode",
         "java.vm.version": "25.312-b07",
         "dpa.connection.timeout": "60000",
-        "build.number": "generic-arm32-buildNumber",
+        "build.number": "aarch64-buildNumber",
         "ccs.status.notification.url": "ccs:log"
     }
 }