This SDK has been developed tested on a esp32s3 and linux. You don't need any physical hardware
to run this SDK. You can use it from Linux directly.
To use it on hardware purchase either of these microcontrollers. Others may work, but this is what has been developed against.
You can get a ESP32S3 for much less money on eBay/AliExpress.
protoc must be in your path with protobufc installed.
Call set-target with the platform you are targetting. Today only linux and esp32s3 are supported.
idf.py set-target esp32s3
Configure device specific settings. None needed at this time
idf.py menuconfig
Set your Wifi SSID + Password as env variables
export WIFI_SSID=fooexport WIFI_PASSWORD=barexport OPENAI_API_KEY=bing
Build
idf.py build
If you built for esp32s3 run the following to flash to the device
sudo -E idf.py flash
If you built for linux you can run the binary directly
./build/src.elf
See build.yaml for a Docker command to do this all in one step.