This project is an API server for Observatorium. The API provides an authenticated and authorized, multi-tenant interface for writing and reading observability signals, i.e. metrics and logs.
For a quick start, run:
make test-interactiveThis command spins up a full setup for Observatorium API with all dependent services. It is intended for short-lived manual testing on your local environment.
It is also possible to run the test with flags '-v' (to see the output) and '-test.timeout=9999m' to ensure the test is not terminated.
Since this starts all necessary services in a Docker environment, make sure you have Docker installed.
The Observatorium API server fulfills requests by proxying reads and writes to a backend for each type of observability signal.
The Observatorium API server can serve read and write requests for Prometheus metrics. In order to handle requests for metrics, a compatible backend must be configured.
The backend from which to read metrics can be specified with the --metrics.read.endpoint flag.
Compatible backends must implement the Prometheus HTTP API, e.g. Prometheus, Thanos querier, Cortex, etc.
The backend to which to write metrics can be specified with the --metrics.write.endpoint flag.
Compatible backends must implement the Prometheus remote-write API, e.g. Thanos receiver, Cortex, etc.
The rules backend to where rules can be stored can be specified with the --metrics.rules.endpoint flag.
The Observatorium API server can serve read and write requests for logs. In order to handle requests for logs, a compatible backend must be configured.
The backend from which to read logs can be specified with the --logs.read.endpoint flag.
Compatible backends must implement the Loki read API, e.g. Loki.
The backend from which to tail logs can be specified with the --logs.tail.endpoint flag.
Compatible backends must implement the Loki tail API, e.g. Loki.
The backend to which to write logs can be specified with the --logs.write.endpoint flag.
Compatible backends must implement the Loki write API, e.g. Loki.
Usage of ./observatorium-api:
-debug.block-profile-rate int
The percentage of goroutine blocking events that are reported in the blocking profile. (default 10)
-debug.mutex-profile-fraction int
The percentage of mutex contention events that are reported in the mutex profile. (default 10)
-debug.name string
A name to add as a prefix to log lines. (default "observatorium")
-experimental.traces.read.endpoint-template string
A template replacing --read.traces.endpoint, such as http://jaeger-{tenant}-query:16686
-grpc.listen string
The address on which the public gRPC server listens.
-internal.tracing.endpoint string
The full URL of the trace agent or collector. If it's not set, tracing will be disabled.
-internal.tracing.endpoint-type string
The tracing endpoint type. Options: 'agent', 'collector'. (default "agent")
-internal.tracing.sampling-fraction float
The fraction of traces to sample. Thus, if you set this to .5, half of traces will be sampled. (default 0.1)
-internal.tracing.service-name string
The service name to report to the tracing backend. (default "observatorium_api")
-log.format string
The log format to use. Options: 'logfmt', 'json'. (default "logfmt")
-log.level string
The log filtering level. Options: 'error', 'warn', 'info', 'debug'. (default "info")
-logs.read.endpoint string
The endpoint against which to make read requests for logs.
-logs.tail.endpoint string
The endpoint against which to make tail read requests for logs.
-logs.tenant-header string
The name of the HTTP header containing the tenant ID to forward to the logs upstream. (default "X-Scope-OrgID")
-logs.tls.ca-file string
File containing the TLS CA against which to upstream logs servers. Leave blank to disable TLS.
-logs.write.endpoint string
The endpoint against which to make write requests for logs.
-metrics.read.endpoint string
The endpoint against which to send read requests for metrics. It used as a fallback to 'query.endpoint' and 'query-range.endpoint'.
-metrics.rules.endpoint string
The endpoint against which to make get requests for listing recording/alerting rules and put requests for creating/updating recording/alerting rules.
-metrics.tenant-header string
The name of the HTTP header containing the tenant ID to forward to the metrics upstreams. (default "THANOS-TENANT")
-metrics.tenant-label string
The name of the PromQL label that should hold the tenant ID in metrics upstreams. (default "tenant_id")
-metrics.tls.ca-file string
File containing the TLS CA against which to upstream metrics servers. Leave blank to disable TLS.
-metrics.write.endpoint string
The endpoint against which to make write requests for metrics.
-middleware.backlog-duration-concurrent-requests duration
The time duration to buffer up concurrent requests. (default 1ms)
-middleware.backlog-limit-concurrent-requests int
The number of concurrent requests that can buffered.
-middleware.concurrent-request-limit int
The limit that controls the number of concurrently processed requests across all tenants. (default 10000)
-middleware.rate-limiter.grpc-address string
The gRPC Server Address against which to run rate limit checks when the rate limits are specified for a given tenant. If not specified, local, non-shared rate limiting will be used.
-rbac.config string
Path to the RBAC configuration file. (default "rbac.yaml")
-tenants.config string
Path to the tenants file. (default "tenants.yaml")
-tls.cipher-suites string
Comma-separated list of cipher suites for the server. Values are from tls package constants (https://golang.org/pkg/crypto/tls/#pkg-constants). If omitted, the default Go cipher suites will be used. Note that TLS 1.3 ciphersuites are not configurable.
-tls.client-auth-type string
Policy for TLS client-side authentication. Values are from ClientAuthType constants in https://pkg.go.dev/crypto/tls#ClientAuthType (default "RequestClientCert")
-tls.healthchecks.server-ca-file string
File containing the TLS CA against which to verify servers. If no server CA is specified, the client will use the system certificates.
-tls.healthchecks.server-name string
Server name is used to verify the hostname of the certificates returned by the server. If no server name is specified, the server name will be inferred from the healthcheck URL.
-tls.internal.server.cert-file string
File containing the default x509 Certificate for internal HTTPS. Leave blank to disable TLS.
-tls.internal.server.key-file string
File containing the default x509 private key matching --tls.internal.server.cert-file. Leave blank to disable TLS.
-tls.max-version string
Maximum TLS version supported. Value must match version names from https://golang.org/pkg/crypto/tls/#pkg-constants. (default "VersionTLS13")
-tls.min-version string
Minimum TLS version supported. Value must match version names from https://golang.org/pkg/crypto/tls/#pkg-constants. (default "VersionTLS13")
-tls.reload-interval duration
The interval at which to watch for TLS certificate changes. (default 1m0s)
-tls.server.cert-file string
File containing the default x509 Certificate for HTTPS. Leave blank to disable TLS.
-tls.server.key-file string
File containing the default x509 private key matching --tls.server.cert-file. Leave blank to disable TLS.
-traces.read.endpoint string
The endpoint against which to make HTTP read requests for traces.
-traces.tenant-header string
The name of the HTTP header containing the tenant ID to forward to upstream OpenTelemetry collector. (default "X-Tenant")
-traces.write.endpoint string
The endpoint against which to make gRPC write requests for traces.
-web.healthchecks.url string
The URL against which to run healthchecks. (default "http://localhost:8080")
-web.internal.listen string
The address on which the internal server listens. (default ":8081")
-web.listen string
The address on which the public server listens. (default ":8080")