Add protocol-explicit upload.tool properties required for pluggable d…

…iscovery compatibility (#8151)

A new flexible and powerful "pluggable discovery" system was added to the Arduino boards platform framework. This system
makes it easy for Arduino boards platform authors to use any arbitrary communication channel between the board and
development tools.

Boards platform configurations that use the old property syntax are automatically translated to the new syntax by
Arduino CLI:

https://arduino.github.io/arduino-cli/latest/platform-specification/#sketch-upload-configuration

> For backward compatibility with IDE 1.8.15 and older the previous syntax is still supported

This translation is only done in platforms that use the old syntax exclusively. If `pluggable_discovery` properties are
defined for the platform then the new pluggable discovery-style `upload.tool.<protocol_name>` properties must be defined
for each board as well.

This platform was converted to use the new pluggable discovery platform properties syntax, so those properties are
required. Although such properties were added to board definitions at the time the syntax was changed, new board
definitions without the required properties were added later.

Those missing properties caused uploads to fail for users of the recent versions of Arduino IDE and Arduino CLI with an
error of the form:

Error during Upload: Property 'upload.tool.serial' is undefined

It is also important to provide compatibility with versions of Arduino development tools from before the introduction of
the modern pluggable discovery system. For this reason, the old style `<board ID>.upload.tool` properties are retained.
Old versions of the development tools will treat the `<board ID>.upload.tool.default` properties as an unused
arbitrary user defined property with no special significance and the new versions of the development tools will do the
same for the `upload.tool` properties.

boards.txt

@@ -7314,6 +7314,7 @@ dfrobot_beetle_esp32c3.menu.EraseFlash.all.upload.erase_cmd=-e
 dfrobot_firebeetle2_esp32e.name=FireBeetle 2 ESP32-E
 
 dfrobot_firebeetle2_esp32e.upload.tool=esptool_py
+dfrobot_firebeetle2_esp32e.upload.tool.default=esptool_py
 dfrobot_firebeetle2_esp32e.upload.maximum_size=1310720
 dfrobot_firebeetle2_esp32e.upload.maximum_data_size=327680
 dfrobot_firebeetle2_esp32e.upload.flags=
@@ -22259,6 +22260,7 @@ esp32c3m1IKit.menu.EraseFlash.all.upload.erase_cmd=-e
 roboheart_hercules.name=RoboHeart Hercules
 
 roboheart_hercules.upload.tool=esptool_py
+roboheart_hercules.upload.tool.default=esptool_py
 roboheart_hercules.upload.maximum_size=1310720
 roboheart_hercules.upload.maximum_data_size=327680
 roboheart_hercules.upload.wait_for_upload_port=true