fix: sha3 package build error

.env.template

@@ -1,7 +1,6 @@
 #
 # Private
 #
-REACT_APP_PORTIS_DAPP_ID=006cdb48-470e-466c-aa20-c4de6ebd10e7
 REACT_APP_INFURA_PROJECT_ID=464bfe80298f4d0782f61h4b91de2dcb
 
 #

README.md

@@ -26,8 +26,6 @@ The Infura Project ID will enable the network status progress bar showing the ba
 REACT_APP_INFURA_PROJECT_ID=your-infura-project-id-here
 ```
 
-Note: The Portis wallet option is not available when running locally
-
 ## Installation
 
 **Available Scripts**

package.json

@@ -19,7 +19,6 @@
     "@web3-react/core": "^6.0.7",
     "@web3-react/fortmatic-connector": "^6.0.7",
     "@web3-react/injected-connector": "latest",
-    "@web3-react/portis-connector": "latest",
     "@web3-react/types": "^6.0.7",
     "animate.css": "^3.7.2",
     "animate.css-react": "^1.0.0",

src/intl/compiled/en.json

@@ -173,20 +173,6 @@
       "value": " to them, instead of the official deposit contract. Make sure that the address you are sending the transaction to is the correct address."
     }
   ],
-  "/Z5X80": [
-    {
-      "type": 0,
-      "value": "Use "
-    },
-    {
-      "type": 1,
-      "value": "testnet"
-    },
-    {
-      "type": 0,
-      "value": " to sync the Holesky testnet."
-    }
-  ],
   "/e+qAC": [
     {
       "type": 0,
@@ -299,6 +285,12 @@
       "value": "Once set up, your validator won't become active straight away. Use this time to complete the checklist and get some extra practice on a testnet."
     }
   ],
+  "01AzGi": [
+    {
+      "type": 0,
+      "value": "Nethermind is built in C# with flexible plugin architecture and licensed under the LGPL-3.0."
+    }
+  ],
   "03xT/J": [
     {
       "type": 0,
@@ -899,6 +891,12 @@
       "value": "Reth Audit Report"
     }
   ],
+  "3jhjXW": [
+    {
+      "type": 0,
+      "value": "Check out the following guide to properly configure Engine JSON-RPC API for your consensus client."
+    }
+  ],
   "3tR/V9": [
     {
       "type": 0,
@@ -1749,6 +1747,12 @@
       "value": "Send deposit"
     }
   ],
+  "A4nMs+": [
+    {
+      "type": 0,
+      "value": "Check out the following guide to get your execution client working properly."
+    }
+  ],
   "A6Oppp": [
     {
       "type": 0,
@@ -2443,12 +2447,6 @@
       "value": " is the software that acts on behalf of the validator by holding and using its private key to make attestations about the state of the chain. A single validator client can hold many key pairs, controlling many validators."
     }
   ],
-  "FfLWt5": [
-    {
-      "type": 0,
-      "value": "An Ethereum client with a huge pool of developers. It's perfect for enterprise-grade systems."
-    }
-  ],
   "FgraU0": [
     {
       "type": 0,
@@ -2765,6 +2763,12 @@
       "value": "Tools available for generating key change message"
     }
   ],
+  "IZEvbY": [
+    {
+      "type": 0,
+      "value": "The Nethermind Ethereum execution client, built on .NET, delivers industry-leading performance in syncing and tip-of-chain processing. With its modular design and plugin system, it offers extensibility and features for new chains. As one of the most adopted execution clients on Ethereum, Nethermind plays a crucial role in enhancing the diversity and resilience of the Ethereum ecosystem."
+    }
+  ],
   "IZFEUg": [
     {
       "type": 0,
@@ -3047,12 +3051,6 @@
       "value": "url"
     }
   ],
-  "KbUOQp": [
-    {
-      "type": 0,
-      "value": "Nethermind is a robust client built on .NET core designed for performance, versatility and customizability."
-    }
-  ],
   "KhJBVZ": [
     {
       "type": 0,
@@ -3119,6 +3117,12 @@
       "value": "reload your wallet"
     }
   ],
+  "LBAaxu": [
+    {
+      "type": 0,
+      "value": "JSON-RPC endpoint"
+    }
+  ],
   "LHPZ+C": [
     {
       "type": 0,
@@ -4541,12 +4545,6 @@
       "value": "Reth is a modular, contributor-friendly and blazing-fast implementation of the Ethereum protocol, in Rust. Reth is able to sync an archive node in less than 50 hours from genesis. A Reth mainnet archive node is only 2.1TB in June 2024."
     }
   ],
-  "WYlfSC": [
-    {
-      "type": 0,
-      "value": "Nethermind on Holesky documentation"
-    }
-  ],
   "WdDGn6": [
     {
       "type": 0,
@@ -5669,6 +5667,12 @@
       "value": "More on virtualenv"
     }
   ],
+  "g8+DBf": [
+    {
+      "type": 0,
+      "value": "Configuring JSON-RPC interface"
+    }
+  ],
   "g8tzOu": [
     {
       "type": 0,
@@ -5841,12 +5845,6 @@
       "value": "Desktop only"
     }
   ],
-  "hPCn9f": [
-    {
-      "type": 0,
-      "value": "--JsonRpc.Enabled documentation"
-    }
-  ],
   "hXE+0W": [
     {
       "type": 0,
@@ -7355,20 +7353,6 @@
       "value": "Phishing guide"
     }
   ],
-  "rMjMmc": [
-    {
-      "type": 0,
-      "value": "Use "
-    },
-    {
-      "type": 1,
-      "value": "http"
-    },
-    {
-      "type": 0,
-      "value": " to connect your consensus node to the JSON RPC endpoint. This will enable the JSON RPC services on the default 8545 port."
-    }
-  ],
   "rTSJI9": [
     {
       "type": 0,
@@ -7889,6 +7873,12 @@
       "value": " deposits?"
     }
   ],
+  "v/nu/L": [
+    {
+      "type": 0,
+      "value": "The Nethermind Ethereum execution client, built on .NET, delivers industry-leading performance in syncing and tip-of-chain processing."
+    }
+  ],
   "v0ygo6": [
     {
       "type": 0,
@@ -8299,12 +8289,6 @@
       "value": "This is the expected scenario."
     }
   ],
-  "yjBvUO": [
-    {
-      "type": 0,
-      "value": "Nethermind is built on .NET Core. Extend it, customise it - the sky’s the limit.."
-    }
-  ],
   "ylZLi4": [
     {
       "type": 0,
@@ -8391,20 +8375,6 @@
       "value": "Staking economics"
     }
   ],
-  "zbEBi9": [
-    {
-      "type": 0,
-      "value": "Use "
-    },
-    {
-      "type": 1,
-      "value": "mainnet"
-    },
-    {
-      "type": 0,
-      "value": " to sync the Ethereum mainnet."
-    }
-  ],
   "zicXn7": [
     {
       "type": 0,

src/intl/en.json

@@ -69,10 +69,6 @@
   "/WenEu": {
     "message": "You are responsible for the transaction. Fraudulent websites might try and lure you into sending the {pricePerValidator} to them, instead of the official deposit contract. Make sure that the address you are sending the transaction to is the correct address."
   },
-  "/Z5X80": {
-    "description": "{testnet} shows '--config holesky' terminal command",
-    "message": "Use {testnet} to sync the Holesky testnet."
-  },
   "/e+qAC": {
     "message": "withdrawable epoch"
   },
@@ -110,6 +106,9 @@
   "00d8uq": {
     "message": "Once set up, your validator won't become active straight away. Use this time to complete the checklist and get some extra practice on a testnet."
   },
+  "01AzGi": {
+    "message": "Nethermind is built in C# with flexible plugin architecture and licensed under the LGPL-3.0."
+  },
   "03xT/J": {
     "message": "The idea behind this is to minimize the losses from honest mistakes, but strongly disincentivize coordinated attacks."
   },
@@ -328,6 +327,9 @@
   "3fRpn0": {
     "message": "Reth Audit Report"
   },
+  "3jhjXW": {
+    "message": "Check out the following guide to properly configure Engine JSON-RPC API for your consensus client."
+  },
   "3tR/V9": {
     "message": "Section 2 - During setup"
   },
@@ -631,6 +633,9 @@
   "A2b4uB": {
     "message": "Send deposit"
   },
+  "A4nMs+": {
+    "message": "Check out the following guide to get your execution client working properly."
+  },
   "A6Oppp": {
     "message": "Prysm offers step-by-step guidelines to run their client after completing your deposit through the launchpad."
   },
@@ -919,9 +924,6 @@
   "Felr8P": {
     "message": "A {validatorClient} is the software that acts on behalf of the validator by holding and using its private key to make attestations about the state of the chain. A single validator client can hold many key pairs, controlling many validators."
   },
-  "FfLWt5": {
-    "message": "An Ethereum client with a huge pool of developers. It's perfect for enterprise-grade systems."
-  },
   "FgraU0": {
     "message": "Step 1: Download the deposit command line interface app for your operating system"
   },
@@ -1055,6 +1057,9 @@
   "IYvwsI": {
     "message": "Tools available for generating key change message"
   },
+  "IZEvbY": {
+    "message": "The Nethermind Ethereum execution client, built on .NET, delivers industry-leading performance in syncing and tip-of-chain processing. With its modular design and plugin system, it offers extensibility and features for new chains. As one of the most adopted execution clients on Ethereum, Nethermind plays a crucial role in enhancing the diversity and resilience of the Ethereum ecosystem."
+  },
   "IZFEUg": {
     "message": "Ready"
   },
@@ -1166,9 +1171,6 @@
     "description": "{url} is link to GitHub CLI release, made bold for emphasis",
     "message": "Please make sure that you are downloading from the official StakeHouse GitHub account by verifying the url: {url}"
   },
-  "KbUOQp": {
-    "message": "Nethermind is a robust client built on .NET core designed for performance, versatility and customizability."
-  },
   "KhJBVZ": {
     "message": "View the Staking Checklist"
   },
@@ -1198,6 +1200,9 @@
   "L8jrV5": {
     "message": "reload your wallet"
   },
+  "LBAaxu": {
+    "message": "JSON-RPC endpoint"
+  },
   "LHPZ+C": {
     "message": "Lighthouse is a consensus client implementation, written in Rust with a heavy focus on speed and security."
   },
@@ -1729,10 +1734,6 @@
   "WVsePo": {
     "message": "Reth is a modular, contributor-friendly and blazing-fast implementation of the Ethereum protocol, in Rust. Reth is able to sync an archive node in less than 50 hours from genesis. A Reth mainnet archive node is only 2.1TB in June 2024."
   },
-  "WYlfSC": {
-    "description": "Links to the documentation for the execution client Nethermind, specifically for testnet Holesky",
-    "message": "Nethermind on Holesky documentation"
-  },
   "WdDGn6": {
     "message": "An implementation of the consensus protocol with a focus on usability, security, and reliability. Prysm is developed by Prysmatic Labs, a company with the sole focus on the development of their client."
   },
@@ -2164,6 +2165,9 @@
   "g37XKP": {
     "message": "More on virtualenv"
   },
+  "g8+DBf": {
+    "message": "Configuring JSON-RPC interface"
+  },
   "g8tzOu": {
     "message": "Paste your chosen address here to include it in the copy/paste CLI command below:"
   },
@@ -2231,9 +2235,6 @@
   "hG0uP4": {
     "message": "Desktop only"
   },
-  "hPCn9f": {
-    "message": "--JsonRpc.Enabled documentation"
-  },
   "hXE+0W": {
     "description": "Tells user to upload specific JSON file created during previous step",
     "message": "Upload {depositJSON}"
@@ -2801,10 +2802,6 @@
   "rD3ot9": {
     "message": "Phishing guide"
   },
-  "rMjMmc": {
-    "description": "{http} shows '--JsonRpc.Enabled true' terminal command",
-    "message": "Use {http} to connect your consensus node to the JSON RPC endpoint. This will enable the JSON RPC services on the default 8545 port."
-  },
   "rTSJI9": {
     "message": "Try the testnet"
   },
@@ -2969,6 +2966,9 @@
     "description": "Asks users to check deposit contract address against a block explorer and confirm 32 ETH deposits are present",
     "message": "Are there recent {ethAmount} deposits?"
   },
+  "v/nu/L": {
+    "message": "The Nethermind Ethereum execution client, built on .NET, delivers industry-leading performance in syncing and tip-of-chain processing."
+  },
   "v0ygo6": {
     "message": "Testing on Holesky"
   },
@@ -3149,9 +3149,6 @@
   "yis3aS": {
     "message": "This is the expected scenario."
   },
-  "yjBvUO": {
-    "message": "Nethermind is built on .NET Core. Extend it, customise it - the sky’s the limit.."
-  },
   "ylZLi4": {
     "message": "EIP-2334"
   },
@@ -3186,10 +3183,6 @@
   "zJicsO": {
     "message": "Staking economics"
   },
-  "zbEBi9": {
-    "description": "{mainnet} shows '--config mainnet' terminal command",
-    "message": "Use {mainnet} to sync the Ethereum mainnet."
-  },
   "zicXn7": {
     "message": "Node security"
   },