Generic Toom-3 multiplication for gr_poly

doc/source/gr_poly.rst

@@ -170,6 +170,18 @@ Arithmetic
     algorithm with `O(n^{1.6})` complexity, the ring must overload :func:`_gr_poly_mul` to dispatch
     to :func:`_gr_poly_mul_karatsuba` above some cutoff.
 
+.. function:: int _gr_poly_mul_toom33(gr_ptr res, gr_srcptr poly1, slong len1, gr_srcptr poly2, slong len2, gr_ctx_t ctx);
+              int gr_poly_mul_toom33(gr_poly_t res, const gr_poly_t poly1, const gr_poly_t poly2, gr_ctx_t ctx);
+
+    Balanced Toom-3 multiplication with interpolation in five points,
+    using the Bodrato evaluation scheme. Assumes commutativity and division by 3.
+    Not optimized for squaring.
+    The underscore method requires positive lengths and does not support aliasing.
+    This function calls :func:`_gr_poly_mul` recursively rather than itself, so to get a recursive
+    algorithm with `O(n^{1.5})` complexity, the ring must overload :func:`_gr_poly_mul` to dispatch
+    to :func:`_gr_poly_mul_toom33` above some cutoff.
+
+
 Powering
 --------------------------------------------------------------------------------
 

src/gr_poly.h

@@ -124,7 +124,8 @@ WARN_UNUSED_RESULT int gr_poly_mul_scalar(gr_poly_t res, const gr_poly_t poly, g
 
 WARN_UNUSED_RESULT int _gr_poly_mul_karatsuba(gr_ptr res, gr_srcptr poly1, slong len1, gr_srcptr poly2, slong len2, gr_ctx_t ctx);
 WARN_UNUSED_RESULT int gr_poly_mul_karatsuba(gr_poly_t res, const gr_poly_t poly1, const gr_poly_t poly2, gr_ctx_t ctx);
-
+WARN_UNUSED_RESULT int _gr_poly_mul_toom33(gr_ptr res, gr_srcptr poly1, slong len1, gr_srcptr poly2, slong len2, gr_ctx_t ctx);
+WARN_UNUSED_RESULT int gr_poly_mul_toom33(gr_poly_t res, const gr_poly_t poly1, const gr_poly_t poly2, gr_ctx_t ctx);
 
 /* powering */
 

src/gr_poly/mul_toom33.c

@@ -0,0 +1,204 @@
+/*
+    Copyright (C) 2007 Marco Bodrato
+    Copyright (C) 2024 Fredrik Johansson
+
+    This file is part of FLINT.
+
+    FLINT is free software: you can redistribute it and/or modify it under
+    the terms of the GNU Lesser General Public License (LGPL) as published
+    by the Free Software Foundation; either version 3 of the License, or
+    (at your option) any later version.  See <https://www.gnu.org/licenses/>.
+*/
+
+#include "gr_vec.h"
+#include "gr_poly.h"
+
+/*
+   Toom33 (interpolation in 5 points) using Bodrato scheme
+   http://marco.bodrato.it/papers/Bodrato2007-OptimalToomCookMultiplicationForBinaryFieldAndIntegers.pdf
+
+   Assumes commutativity, division by 3.
+   Todo: squaring version.
+   Todo: skip unnecessary zero-extensions of vectors and tighten
+         allocations.
+*/
+int
+_gr_poly_mul_toom33(gr_ptr res, gr_srcptr f, slong flen, gr_srcptr g, slong glen, gr_ctx_t ctx)
+{
+    gr_srcptr U0, U1, U2, V0, V1, V2;
+    gr_ptr tmp, W0, W1, W2, W3, W4;
+    slong m, U2len, V2len, U1len, V1len, U0len, V0len, rlen, len;
+    slong sz = ctx->sizeof_elem;
+    slong alloc;
+    int status = GR_SUCCESS;
+
+    /* TODO: should explicitly call basecase mul. */
+    if (flen <= 1 || glen <= 1)
+        return _gr_poly_mullow_generic(res, f, flen, g, glen, flen + glen - 1, ctx);
+
+    /* U = U2*x^(2m) + U1*x^m + U0 */
+    /* V = V2*x^(2m) + V1*x^m + V0 */
+    /* Each block has length m */
+    m = FLINT_MAX(flen, glen);
+    m = (m + 3 - 1) / 3;
+    U0 = f;
+    U1 = GR_ENTRY(f, m, sz);
+    U2 = GR_ENTRY(f, 2 * m, sz);
+    V0 = g;
+    V1 = GR_ENTRY(g, m, sz);
+    V2 = GR_ENTRY(g, 2 * m, sz);
+
+    U2len = FLINT_MAX(flen - 2 * m, 0);
+    V2len = FLINT_MAX(glen - 2 * m, 0);
+    U1len = FLINT_MIN(FLINT_MAX(flen - m, 0), m);
+    V1len = FLINT_MIN(FLINT_MAX(glen - m, 0), m);
+    U0len = FLINT_MIN(flen, m);
+    V0len = FLINT_MIN(glen, m);
+
+    alloc = 10 * m;
+    GR_TMP_INIT_VEC(tmp, alloc, ctx);
+    W0 = tmp;
+    W1 = GR_ENTRY(W0, 2 * m, sz);
+    W2 = GR_ENTRY(W1, 2 * m, sz);
+    W3 = GR_ENTRY(W2, 2 * m, sz);
+    W4 = GR_ENTRY(W3, 2 * m, sz);
+
+    /* Evaluation: 5*2 add, 2 shift; 5mul */
+    /* W0 = U2 + U0 */
+    /* if max(U2len,U0len) < m, assumes top coefficients are already zeroed from the initialization */
+    status |= _gr_poly_add(W0, U2, U2len, U0, U0len, ctx);
+    /* W4 = V2 + V0 */
+    /* if max(V2len,V0len) < m, assumes top coefficients are already zeroed from the initialization */
+    status |= _gr_poly_add(W4, V2, V2len, V0, V0len, ctx);
+    /* W2 = W0 - U1 */
+    status |= _gr_poly_sub(W2, W0, m, U1, U1len, ctx);
+    /* W1 = W4 - V1 */
+    status |= _gr_poly_sub(W1, W4, m, V1, V1len, ctx);
+    /* W0 = W0 + U1 */
+    status |= _gr_poly_add(W0, W0, m, U1, U1len, ctx);
+    /* W4 = W4 + V1 */
+    status |= _gr_poly_add(W4, W4, m, V1, V1len, ctx);
+    /* W3 = W2 * W1 */
+    status |= _gr_poly_mul(W3, W2, m, W1, m, ctx);
+    /* W1 = W0 * W4 */
+    status |= _gr_poly_mul(W1, W0, m, W4, m, ctx);
+    /* W0 = ((W0 + U2) << 1) - U0 */
+    status |= _gr_poly_add(W0, W0, m, U2, U2len, ctx);
+    status |= _gr_vec_mul_scalar_2exp_si(W0, W0, m, 1, ctx);
+    status |= _gr_poly_sub(W0, W0, m, U0, U0len, ctx);
+    /* W4 = ((W4 + V2) << 1) - V0 */
+    status |= _gr_poly_add(W4, W4, m, V2, V2len, ctx);
+    status |= _gr_vec_mul_scalar_2exp_si(W4, W4, m, 1, ctx);
+    status |= _gr_poly_sub(W4, W4, m, V0, V0len, ctx);
+    /* W2 = W0 * W4 */
+    status |= _gr_poly_mul(W2, W0, m, W4, m, ctx);
+    /* W0 = U0 * V0 */
+    if (U0len > 0 && V0len > 0)
+    {
+        status |= _gr_poly_mul(W0, U0, U0len, V0, V0len, ctx);
+        status |= _gr_vec_zero(GR_ENTRY(W0, U0len + V0len - 1, sz), 2 * m - (U0len + V0len - 1), ctx);
+    }
+    else
+        status |= _gr_vec_zero(W0, 2 * m, ctx);
+    /* W4 = U2 * V2 */
+    if (U2len > 0 && V2len > 0)
+    {
+        status |= _gr_poly_mul(W4, U2, U2len, V2, V2len, ctx);
+        status |= _gr_vec_zero(GR_ENTRY(W4, U2len + V2len - 1, sz), 2 * m - (U2len + V2len - 1), ctx);
+    }
+    else
+        status |= _gr_vec_zero(W4, 2 * m, ctx);
+
+
+    /* toom42 variant */
+    /* U = U3*x^(3m) + U2*x^(2m) + U1*x^m + U0 */
+    /* V = V1*x^m + V0 */
+    /* Evaluation: 7+3 add, 3 shift; 5mul */
+    /*
+    W0 = U1 + U3;
+    W4 = U0 + U2;
+    W3 = W4 + W0;
+    W4 = W4 - W0;
+    W0 = V0 + V1;
+    W2 = V0 - V1;
+    W1 = W3 * W0;
+    W3 = W4 * W2;
+    W4 = (((((U3<<1) + U2) << 1) + U1) << 1) + U0;
+    W0 = W0 + V1;
+    W2 = W4 * W0;
+    W0 = U0 * V0;
+    W4 = U3 * V1;
+    */
+
+    /* Interpolation: 8 add, 3 shift, 1 Sdiv */
+    len = 2 * m - 1;
+    /* W2 = (W2 - W3) / 3 */
+    status |= _gr_vec_sub(W2, W2, W3, len, ctx);
+    status |= _gr_vec_divexact_scalar_ui(W2, W2, len, 3, ctx);
+    /* W3 = (W1 - W3) >> 1 */
+    status |= _gr_vec_sub(W3, W1, W3, len, ctx);
+    status |= _gr_vec_mul_scalar_2exp_si(W3, W3, len, -1, ctx);
+    /* W1 = W1 - W0 */
+    status |= _gr_vec_sub(W1, W1, W0, len, ctx);
+    /* W2 = ((W2 - W1) >> 1) - (W4 << 1) */
+    status |= _gr_vec_sub(W2, W2, W1, len, ctx);
+    status |= _gr_vec_mul_scalar_2exp_si(W2, W2, len, -1, ctx);
+    status |= _gr_vec_mul_scalar_2exp_si(res, W4, len, 1, ctx);
+    status |= _gr_vec_sub(W2, W2, res, len, ctx);
+    /* W1 = W1 - W3 - W4 */
+    status |= _gr_vec_sub(W1, W1, W3, len, ctx);
+    status |= _gr_vec_sub(W1, W1, W4, len, ctx);
+    /* W3 = W3 - W2 */
+    status |= _gr_vec_sub(W3, W3, W2, len, ctx);
+
+    /* Recomposition: */
+    /* W = W4 * x^(4m) + W2*x^(3m) + W1*x^(2m) + W3*x^m + W0 */
+
+    rlen = flen + glen - 1;
+    len = FLINT_MIN(rlen, m);
+    status |= _gr_vec_set(res, W0, FLINT_MIN(rlen, m), ctx);
+    len = FLINT_MIN(rlen - m, m);
+    status |= _gr_vec_add(GR_ENTRY(res, m, sz), W3, GR_ENTRY(W0, m, sz), len, ctx);
+    len = FLINT_MIN(rlen - 2 * m, m);
+    status |= _gr_vec_add(GR_ENTRY(res, 2 * m, sz), W1, GR_ENTRY(W3, m, sz), len, ctx);
+    len = FLINT_MIN(rlen - 3 * m, m);
+    status |= _gr_vec_add(GR_ENTRY(res, 3 * m, sz), W2, GR_ENTRY(W1, m, sz), len, ctx);
+    len = FLINT_MIN(rlen - 4 * m, m);
+    status |= _gr_vec_add(GR_ENTRY(res, 4 * m, sz), W4, GR_ENTRY(W2, m, sz), len, ctx);
+    len = FLINT_MIN(rlen - 5 * m, m);
+    status |= _gr_vec_set(GR_ENTRY(res, 5 * m, sz), GR_ENTRY(W4, m, sz), len, ctx);
+
+    GR_TMP_CLEAR_VEC(tmp, alloc, ctx);
+
+    return status;
+}
+
+int
+gr_poly_mul_toom33(gr_poly_t res, const gr_poly_t poly1, const gr_poly_t poly2, gr_ctx_t ctx)
+{
+    slong len_out;
+    int status;
+
+    if (poly1->length == 0 || poly2->length == 0)
+        return gr_poly_zero(res, ctx);
+
+    len_out = poly1->length + poly2->length - 1;
+
+    if (res == poly1 || res == poly2)
+    {
+        gr_poly_t t;
+        gr_poly_init2(t, len_out, ctx);
+        status = _gr_poly_mul_toom33(t->coeffs, poly1->coeffs, poly1->length, poly2->coeffs, poly2->length, ctx);
+        gr_poly_swap(res, t, ctx);
+        gr_poly_clear(t, ctx);
+    }
+    else
+    {
+        gr_poly_fit_length(res, len_out, ctx);
+        status = _gr_poly_mul_toom33(res->coeffs, poly1->coeffs, poly1->length, poly2->coeffs, poly2->length, ctx);
+    }
+
+    _gr_poly_set_length(res, len_out, ctx);
+    _gr_poly_normalise(res, ctx);
+    return status;
+}

src/gr_poly/test/main.c

@@ -44,6 +44,7 @@
 #include "t-log_series.c"
 #include "t-make_monic.c"
 #include "t-mul_karatsuba.c"
+#include "t-mul_toom33.c"
 #include "t-nth_derivative.c"
 #include "t-pow_series_fmpq.c"
 #include "t-pow_series_ui.c"
@@ -106,6 +107,7 @@ test_struct tests[] =
     TEST_FUNCTION(gr_poly_log_series),
     TEST_FUNCTION(gr_poly_make_monic),
     TEST_FUNCTION(gr_poly_mul_karatsuba),
+    TEST_FUNCTION(gr_poly_mul_toom33),
     TEST_FUNCTION(gr_poly_nth_derivative),
     TEST_FUNCTION(gr_poly_pow_series_fmpq),
     TEST_FUNCTION(gr_poly_pow_series_ui),

src/gr_poly/test/t-mul_toom33.c

@@ -0,0 +1,106 @@
+/*
+    Copyright (C) 2023 Fredrik Johansson
+
+    This file is part of FLINT.
+
+    FLINT is free software: you can redistribute it and/or modify it under
+    the terms of the GNU Lesser General Public License (LGPL) as published
+    by the Free Software Foundation; either version 3 of the License, or
+    (at your option) any later version.  See <https://www.gnu.org/licenses/>.
+*/
+
+#include "test_helpers.h"
+#include "ulong_extras.h"
+#include "gr_poly.h"
+
+FLINT_DLL extern gr_static_method_table _ca_methods;
+
+int
+test_mul1(flint_rand_t state, int which)
+{
+    gr_ctx_t ctx;
+    slong n;
+    gr_poly_t A, B, C, D;
+    int status = GR_SUCCESS;
+
+    gr_ctx_init_random(ctx, state);
+
+    gr_poly_init(A, ctx);
+    gr_poly_init(B, ctx);
+    gr_poly_init(C, ctx);
+    gr_poly_init(D, ctx);
+
+    if (ctx->methods == _ca_methods)
+        n = 2;
+    else if (gr_ctx_is_finite(ctx) == T_TRUE)
+        n = 30;
+    else
+        n = 10;
+
+    GR_MUST_SUCCEED(gr_poly_randtest(A, state, 1 + n_randint(state, n), ctx));
+    GR_MUST_SUCCEED(gr_poly_randtest(B, state, 1 + n_randint(state, n), ctx));
+    GR_MUST_SUCCEED(gr_poly_randtest(C, state, 1 + n_randint(state, n), ctx));
+
+    switch (which)
+    {
+        case 0:
+            status |= gr_poly_mul_toom33(C, A, B, ctx);
+            break;
+        case 1:
+            status |= gr_poly_set(C, A, ctx);
+            status |= gr_poly_mul_toom33(C, C, B, ctx);
+            break;
+        case 2:
+            status |= gr_poly_set(C, B, ctx);
+            status |= gr_poly_mul_toom33(C, A, C, ctx);
+            break;
+        case 3:
+            status |= gr_poly_set(B, A, ctx);
+            status |= gr_poly_mul_toom33(C, A, A, ctx);
+            break;
+        case 4:
+            status |= gr_poly_set(B, A, ctx);
+            status |= gr_poly_set(C, A, ctx);
+            status |= gr_poly_mul_toom33(C, C, C, ctx);
+            break;
+
+        default:
+            flint_abort();
+    }
+
+    /* todo: should explicitly call basecase mul */
+    status |= gr_poly_mullow(D, A, B, FLINT_MAX(0, A->length + B->length - 1), ctx);
+
+    if (status == GR_SUCCESS && gr_poly_equal(C, D, ctx) == T_FALSE)
+    {
+        flint_printf("FAIL\n\n");
+        flint_printf("which = %d, n = %wd\n\n", which, n);
+        gr_ctx_println(ctx);
+        flint_printf("A = "); gr_poly_print(A, ctx); flint_printf("\n\n");
+        flint_printf("B = "); gr_poly_print(B, ctx); flint_printf("\n\n");
+        flint_printf("C = "); gr_poly_print(C, ctx); flint_printf("\n\n");
+        flint_printf("D = "); gr_poly_print(D, ctx); flint_printf("\n\n");
+        flint_abort();
+    }
+
+    gr_poly_clear(A, ctx);
+    gr_poly_clear(B, ctx);
+    gr_poly_clear(C, ctx);
+    gr_poly_clear(D, ctx);
+
+    gr_ctx_clear(ctx);
+
+    return status;
+}
+
+TEST_FUNCTION_START(gr_poly_mul_toom33, state)
+{
+    slong iter;
+
+    for (iter = 0; iter < 1000; iter++)
+    {
+        test_mul1(state, n_randint(state, 5));
+    }
+
+    TEST_FUNCTION_END(state);
+}