Migrate to f-string

Remove outdated format specifiers

boxes/__init__.py

@@ -202,13 +202,13 @@ def html(self, name, default, translate):
         options = "\n".join(
             """<option value="%s"%s>%s</option>""" %
              (e, ' selected="selected"' if e == default else "",
-              translate("%s %s" % (e, self.names.get(e, "")))) for e in self.edges)
-        return """<select name="%s" id="%s" aria-labeledby="%s %s" size="1">\n%s</select>\n""" % (name,  name, name+"_id", name+"_description", options)
+              translate("{} {}".format(e, self.names.get(e, "")))) for e in self.edges)
+        return """<select name="{}" id="{}" aria-labeledby="{} {}" size="1">\n{}</select>\n""".format(name,  name, name+"_id", name+"_description", options)
 
     def inx(self, name, viewname, arg):
         return ('        <param name="%s" type="optiongroup" appearance="combo" gui-text="%s" gui-description=%s>\n' %
                 (name, viewname, quoteattr(arg.help or "")) +
-                ''.join('            <option value="%s">%s %s</option>\n' % (
+                ''.join('            <option value="{}">{} {}</option>\n'.format(
                     e, e, self.names.get(e, ""))
                          for e in self.edges) +
                 '      </param>\n')
@@ -406,10 +406,10 @@ def open(self):
             self.move(self.reference, 10, "up", before=True)
             self.ctx.rectangle(0, 0, self.reference, 10)
             if self.reference < 80:
-                self.text("%.fmm, burn:%.2fmm" % (self.reference , self.burn), self.reference + 5, 5,
+                self.text(f"{self.reference:.f}mm, burn:{self.burn:.2f}mm", self.reference + 5, 5,
                           fontsize=8, align="middle left", color=Color.ANNOTATIONS)
             else:
-                self.text("%.fmm, burn:%.2fmm" % (self.reference , self.burn), self.reference / 2.0, 5,
+                self.text(f"{self.reference:.f}mm, burn:{self.burn:.2f}mm", self.reference / 2.0, 5,
                           fontsize=8, align="middle center", color=Color.ANNOTATIONS)
             self.move(self.reference, 10, "up")
             if self.qr_code:

boxes/gears.py

@@ -437,7 +437,7 @@ def generate_spokes(self, root_radius, spoke_width, spokes, mount_radius, mount_
                 collision = True
             else:
                 mount_radius = mount_hole/2 + adj_factor # small fix
-                messages.append("Mount support too small. Auto increased to %2.2f%s." % (mount_radius/unit_factor*2, unit_label))
+                messages.append(f"Mount support too small. Auto increased to {mount_radius/unit_factor*2:2.2f}{unit_label}.")
 
         # then check to see if cross-over on spoke width
         for i in range(spoke_count):
@@ -446,7 +446,7 @@ def generate_spokes(self, root_radius, spoke_width, spokes, mount_radius, mount_
             if spoke_width >= angle * mount_radius:
                 adj_factor = 1.2 # wrong value. its probably one of the points distances calculated below
                 mount_radius += adj_factor
-                messages.append("Too many spokes. Increased Mount support by %2.3f%s" % (adj_factor/unit_factor, unit_label))
+                messages.append(f"Too many spokes. Increased Mount support by {adj_factor/unit_factor:2.3f}{unit_label}")
 
         # check for collision with outer rim
         if r_outer <= mount_radius:
@@ -488,7 +488,7 @@ def generate_spokes(self, root_radius, spoke_width, spokes, mount_radius, mount_
         return messages
 
     def sizes(self, **kw):
-        self.options = self.OptionParser.parse_args(["--%s=%s" % (name,value) for name, value in kw.items()])
+        self.options = self.OptionParser.parse_args([f"--{name}={value}" for name, value in kw.items()])
         # Pitch (circular pitch): Length of the arc from one tooth to the next)
         # Pitch diameter: Diameter of pitch circle.
         pitch = self.calc_circular_pitch()
@@ -550,7 +550,7 @@ def __call__(self, teeth_only=False, move="", callback=None, **kw):
               iterate through them
             - Turn on other visual features e.g. cross, rack, annotations, etc
         """
-        self.options = self.OptionParser.parse_args(["--%s=%s" % (name,value) for name, value in kw.items()])
+        self.options = self.OptionParser.parse_args([f"--{name}={value}" for name, value in kw.items()])
 
         warnings = [] # list of extra messages to be shown in annotations
         # calculate unit factor for units defined in dialog. 
@@ -687,11 +687,11 @@ def __call__(self, teeth_only=False, move="", callback=None, **kw):
             notes.extend(warnings)
             #notes.append('Document (%s) scale conversion = %2.4f' % (self.document.getroot().find(inkex.addNS('namedview', 'sodipodi')).get(inkex.addNS('document-units', 'inkscape')), unit_factor))
             notes.extend(['Teeth: %d   CP: %2.4f(%s) ' % (teeth, pitch / unit_factor, self.options.units),
-                          'DP: %2.3f Module: %2.4f(mm)' % (25.4 * pi / pitch, pitch),
+                          f'DP: {25.4 * pi / pitch:2.3f} Module: {pitch:2.4f}(mm)',
                           'Pressure Angle: %2.2f degrees' % (angle),
-                          'Pitch diameter: %2.3f %s' % (pitch_radius * 2 / unit_factor, self.options.units),
-                          'Outer diameter: %2.3f %s' % (outer_dia / unit_factor, self.options.units),
-                          'Base diameter:  %2.3f %s' % (base_radius * 2 / unit_factor, self.options.units)#,
+                          f'Pitch diameter: {pitch_radius * 2 / unit_factor:2.3f} {self.options.units}',
+                          f'Outer diameter: {outer_dia / unit_factor:2.3f} {self.options.units}',
+                          f'Base diameter:  {base_radius * 2 / unit_factor:2.3f} {self.options.units}'#,
                           #'Addendum:      %2.4f %s'  % (addendum / unit_factor, self.options.units),
                           #'Dedendum:      %2.4f %s'  % (dedendum / unit_factor, self.options.units)
                           ])

boxes/generators/alledges.py

@@ -56,6 +56,6 @@ def render(self):
                 self.move(0, 0, "")
 
             self.moveTo(0, 3*t + self.edges[c].spacing())
-            self.text("%s - %s" % (c, self.edges[c].description))
+            self.text(f"{c} - {self.edges[c].description}")
             self.moveTo(0, 12*t)
 

boxes/generators/angledbox.py

@@ -125,21 +125,21 @@ def render(self):
             if j == 0 or n % 2:
                 self.rectangularWall(lx, h, move="right",
                                  edges=b+"GfG" if fingers else b+"GeG",
-                                 label="wall {}".format(cnt))
+                                 label=f"wall {cnt}")
             else:
                 self.rectangularWall(lx, h, move="right",
                                  edges=b+"gfg" if fingers else b+"geg",
-                                 label="wall {}".format(cnt))
+                                 label=f"wall {cnt}")
             for i in range(n):
                 cnt += 1
                 if (i+j*((n+1)%2)) % 2: # reverse for second half if even n
                     self.rectangularWall(side, h, move="right",
                                          edges=b+"GfG" if fingers else b+"GeG",
-                                         label="wall {}".format(cnt))
+                                         label=f"wall {cnt}")
                 else:
                     self.rectangularWall(side, h, move="right",
                                          edges=b+"gfg" if fingers else b+"geg",
-                                         label="wall {}".format(cnt))
+                                         label=f"wall {cnt}")
 
 
 

boxes/generators/atreus21.py

@@ -15,7 +15,7 @@ def __init__(self) -> None:
         super().__init__()
         self.add_common_keyboard_parameters(
             # By default, columns from Atreus 21
-            default_columns_definition='4@3/4@6/4@11/4@5/4@0/1@{}'.format(self.btn_size * 0.5)
+            default_columns_definition=f'4@3/4@6/4@11/4@5/4@0/1@{self.btn_size * 0.5}'
         )
 
     def render(self):

boxes/generators/discrack.py

@@ -165,21 +165,15 @@ def warn_on_demand(self):
 
         def word_thickness(length):
             if length > 0:
-                return "very thin (%.2g mm at a thickness of %.2g mm)" % (
-                        length, self.thickness)
+                return f"very thin ({length:.2g} mm at a thickness of {self.thickness:.2g} mm)"
             if length < 0:
                 return "absent"
 
         if self.rear_outset < self.thickness:
-            warnings.append("Rear upper constraint is %s. Consider increasing"
-                    " the disc outset parameter, or move the angle away from 45°."
-                    % word_thickness(self.rear_outset)
-                    )
+            warnings.append("Rear upper constraint is %s. Consider increasing the disc outset parameter, or move the angle away from 45°." % word_thickness(self.rear_outset))
 
         if self.lower_outset < self.thickness:
-            warnings.append("Lower front constraint is %s. Consider increasing"
-                    " the disc outset parameter, or move the angle away from 45°."
-                    % word_thickness(self.lower_outset))
+            warnings.append("Lower front constraint is %s. Consider increasing the disc outset parameter, or move the angle away from 45°." % word_thickness(self.lower_outset))
 
         # Are the discs supported where the grids meet?
 
@@ -188,8 +182,7 @@ def word_thickness(length):
         inner_reardistance = r * self.lower_factor - self.rear_halfslit
 
         if inner_lowerdistance < 0 or inner_reardistance < 0:
-            warnings.append("Corner is inside the disc radios, discs would not"
-                    " be supported. Consider increasing the factor parameters.")
+            warnings.append("Corner is inside the disc radios, discs would not be supported. Consider increasing the factor parameters.")
 
         # Won't the type-H edge on the rear side make the whole contraption
         # wiggle?
@@ -200,9 +193,7 @@ def word_thickness(length):
                 self.edgesettings['FingerJoint']['edge_width'])
 
         if slitlengthplush > max_slitlengthplush:
-            warnings.append("Joint would protrude from lower box edge. Consider"
-                    " increasing the the disc outset parameter, or move the"
-                    " angle away from 45°.")
+            warnings.append("Joint would protrude from lower box edge. Consider increasing the the disc outset parameter, or move the angle away from 45°.")
 
         # Can the discs be removed at all?
         # Does not need explicit checking, for Thales' theorem tells us that at

boxes/generators/dividertray.py

@@ -251,39 +251,22 @@ def render(self):
 
         if self.debug:
             debug_info = ["Debug"]
+            debug_info.append(f"Slot_edge_outer_length:{slot_descriptions.total_length() + 2 * self.thickness:.2f}")
             debug_info.append(
-                "Slot_edge_outer_length:{0:.2f}".format(
-                    slot_descriptions.total_length() + 2 * self.thickness
-                )
-            )
-            debug_info.append(
-                "Slot_edge_inner_lengths:{0}".format(
+                "Slot_edge_inner_lengths:{}".format(
                     str.join(
                         "|",
                         [
-                            "{0:.2f}".format(e.useful_length())
+                            f"{e.useful_length():.2f}"
                             for e in slot_descriptions.get_straight_edges()
                         ],
                     )
                 )
             )
-            debug_info.append(
-                "Face_edge_outer_length:{0:.2f}".format(
-                    facing_wall_length
-                    + self.thickness * sum([self.left_wall, self.right_wall])
-                )
-            )
-            debug_info.append(
-                "Face_edge_inner_lengths:{0}".format(
-                    str.join("|", ["{0:.2f}".format(e) for e in self.sx])
-                )
-            )
-            debug_info.append("Tray_height:{0:.2f}".format(self.h))
-            debug_info.append(
-                "Content_height:{0:.2f}".format(
-                    self.h / math.cos(math.radians(self.Slot_angle))
-                )
-            )
+            debug_info.append(f"Face_edge_outer_length:{facing_wall_length + self.thickness * sum([self.left_wall, self.right_wall]):.2f}")
+            debug_info.append("Face_edge_inner_lengths:{}".format(str.join("|", [f"{e:.2f}" for e in self.sx])))
+            debug_info.append(f"Tray_height:{self.h:.2f}")
+            debug_info.append(f"Content_height:{self.h / math.cos(math.radians(self.Slot_angle)):.2f}")
             self.text(str.join("\n", debug_info), x=5, y=5, align="bottom left")
 
     def generate_finger_holes(self, length):
@@ -411,14 +394,7 @@ def __init__(
         self.angle_compensation = angle_compensation
 
     def __repr__(self) -> str:
-        return (
-            "StraightEdgeDescription({0}, round_edge_compensation={1}, angle_compensation={2}, outside_ratio={3})"
-        ).format(
-            self.asked_length,
-            self.round_edge_compensation,
-            self.angle_compensation,
-            self.outside_ratio,
-        )
+        return f"StraightEdgeDescription({self.asked_length}, round_edge_compensation={self.round_edge_compensation}, angle_compensation={self.angle_compensation}, outside_ratio={self.outside_ratio})"
 
     def tracing_length(self):
         """
@@ -460,9 +436,7 @@ def __init__(
         self.angle = angle
 
     def __repr__(self) -> str:
-        return "SlotDescription({0}, depth={1}, angle={2}, start_radius={3}, end_radius={4})".format(
-            self.width, self.depth, self.angle, self.start_radius, self.end_radius
-        )
+        return f"SlotDescription({self.width}, depth={self.depth}, angle={self.angle}, start_radius={self.start_radius}, end_radius={self.end_radius})"
 
     def _div_by_cos(self):
         return SlotDescription._div_by_cos_cache[self.angle]

boxes/generators/gear.py

@@ -87,10 +87,9 @@ def render(self):
         self.hole(t+r+r1+r2, t+r, self.shaft2/2)
         self.moveTo(0, 2*r+t)
 
-        self.text("""Pitch radius 1: %.1fmm
-Outer diameter 1: %.1fmm
-Pitch radius 2: %.1fmm
-Outer diameter 2: %.1fmm
-Axis distance: %.1fmm
-        """ % (r1, d1, r2, d2, r1+r2), align="bottom left")
-
+        self.text(f"Pitch radius 1: {r1:.1f}mm"
+                  f"Outer diameter 1: {d1:.1f}mm"
+                  f"Pitch radius 2: {r2:.1f}mm"
+                  f"Outer diameter 2: {d2:.1f}mm"
+                  f"Axis distance: {r1 + r2:.1f}mm",
+                  align="bottom left")

boxes/robot.py

@@ -27,7 +27,7 @@ def html(self, name, default, translate):
             ("""<option value="%s"%s>%s %s</option>""" %
              (name, ' selected="selected"' if name == default else "",
               name, descr) for name, descr in self.robotarms))
-        return """<select name="%s" size="1">\n%s</select>\n""" % (name, options)
+        return f"""<select name="{name}" size="1">\n{options}</select>\n"""
 
 
 class _RobotArm:

boxes/servos.py

@@ -65,7 +65,7 @@ def html(self, name, default, translate):
             """<option value="%s"%s>%s</option>""" %
              (name, ' selected="selected"' if name == default else "",
               name) for name in self.servos)
-        return """<select name="%s" size="1">\n%s</select>\n""" % (name, options)
+        return f"""<select name="{name}" size="1">\n{options}</select>\n"""
 
 
 class Servo:

setup.py

@@ -12,18 +12,11 @@ class CustomBuildExtCommand(build_py):
     """Customized setuptools install command - prints a friendly greeting."""
 
     def buildInkscapeExt(self):
-        os.system("%s %s %s" % (sys.executable,
-                                os.path.join("scripts", "boxes2inkscape"),
-                                "inkex"))
+        os.system("{} {} {}".format(sys.executable, os.path.join("scripts", "boxes2inkscape"), "inkex"))
 
     def updatePOT(self):
-        os.system("%s %s %s" % (
-            sys.executable,
-            os.path.join("scripts", "boxes2pot"),
-            "po/boxes.py.pot"))
-        os.system("%s %s" % (
-            "xgettext -L Python -j --from-code=utf-8 -o po/boxes.py.pot",
-            "boxes/*.py scripts/boxesserver scripts/boxes"))
+        os.system("{} {} {}".format(sys.executable, os.path.join("scripts", "boxes2pot"), "po/boxes.py.pot"))
+        os.system("{} {}".format("xgettext -L Python -j --from-code=utf-8 -o po/boxes.py.pot", "boxes/*.py scripts/boxesserver scripts/boxes"))
 
     def generate_mo_files(self):
         pos = glob.glob("po/*.po")
@@ -34,7 +27,7 @@ def generate_mo_files(self):
                 os.makedirs(os.path.join("locale", lang, "LC_MESSAGES"))
             except FileExistsError:
                 pass
-            os.system("msgfmt %s -o locale/%s/LC_MESSAGES/boxes.py.mo" % (po, lang))
+            os.system(f"msgfmt {po} -o locale/{lang}/LC_MESSAGES/boxes.py.mo")
             self.distribution.data_files.append(
                 (os.path.join("share", "locale", lang, "LC_MESSAGES"),
                  [os.path.join("locale", lang, "LC_MESSAGES", "boxes.py.mo")]))
@@ -50,9 +43,7 @@ def run(self):
             # we are most probably building a Debian package
             # let us define a simple path!
             path="/usr/share/inkscape/extensions"
-            self.distribution.data_files.append(
-                (path,
-                 [i for i in glob.glob(os.path.join("inkex", "*.inx"))]))
+            self.distribution.data_files.append((path, [i for i in glob.glob(os.path.join("inkex", "*.inx"))]))
             self.distribution.data_files.append((path, ['scripts/boxes']))
             self.distribution.data_files.append((path, ['scripts/boxes_proxy.py']))
         else:
@@ -64,9 +55,7 @@ def run(self):
                 if not os.access(path, os.W_OK): # Can we install globally
                     # Not tested on Windows and Mac
                     path = os.path.expanduser("~/.config/inkscape/extensions")
-                self.distribution.data_files.append(
-                    (path,
-                     [i for i in glob.glob(os.path.join("inkex", "*.inx"))]))
+                self.distribution.data_files.append((path, [i for i in glob.glob(os.path.join("inkex", "*.inx"))]))
                 self.distribution.data_files.append((path, ['scripts/boxes']))
                 self.distribution.data_files.append((path, ['scripts/boxes_proxy.py']))
             except CalledProcessError: