Ajl/does dash

LoraOledESP32/DoESDash.ipynb

@@ -0,0 +1,172 @@
+{
+ "cells": [
+  {
+   "cell_type": "code",
+   "execution_count": 12,
+   "metadata": {},
+   "outputs": [
+    {
+     "name": "stdout",
+     "output_type": "stream",
+     "text": [
+      "\u001b[34mNo possible ports found\u001b[0m\u001b[34mConnecting to --port=/dev/ttyUSB0 --baud=115200 \u001b[0mcould not open port /dev/ttyUSB0: [Errno 2] No such file or directory: '/dev/ttyUSB0'\n",
+      "\u001b[34m\n",
+      "Are you sure your ESP-device is plugged in?\u001b[0m"
+     ]
+    }
+   ],
+   "source": [
+    "%serialconnect"
+   ]
+  },
+  {
+   "cell_type": "code",
+   "execution_count": 6,
+   "metadata": {},
+   "outputs": [
+    {
+     "name": "stdout",
+     "output_type": "stream",
+     "text": [
+      "Sent 116 lines (2791 bytes) to main.py.\n"
+     ]
+    }
+   ],
+   "source": [
+    "%sendtofile main.py\n",
+    "\n",
+    "import time\n",
+    "import utime\n",
+    "from  machine import Pin, I2C\n",
+    "import machine\n",
+    "import ssd1306\n",
+    "import framebuf\n",
+    "import network\n",
+    "import ubinascii\n",
+    "\n",
+    "# Definitions\n",
+    "ssid = 'DoESLiverpool'\n",
+    "password = '****'\n",
+    "\n",
+    "# Why did we wake up?\n",
+    "print(machine.wake_description())\n",
+    "\n",
+    "# Setup OLED\n",
+    "rst = Pin(16, Pin.OUT)\n",
+    "rst.value(1)\n",
+    "scl = Pin(15, Pin.OUT, Pin.PULL_UP)\n",
+    "sda = Pin(4, Pin.OUT, Pin.PULL_UP)\n",
+    "\n",
+    "i2c = I2C(scl=scl, sda=sda, freq=450000)\n",
+    "\n",
+    "oled = ssd1306.SSD1306_I2C(128, 64, i2c, addr=0x3c)\n",
+    " \n",
+    "# Gimme a welcome screen!\n",
+    "oled.fill(0)\n",
+    "oled.text('DoES Dash', 0, 0)\n",
+    "oled.show()\n",
+    "time.sleep(0.25)\n",
+    "\n",
+    "# Set up networking\n",
+    "sta_if = network.WLAN(network.STA_IF)\n",
+    " \n",
+    "oled.text('Wifi Connecting', 0, 10)\n",
+    "#oled.text(ssid, 0, 20)\n",
+    "oled.show()\n",
+    " \n",
+    "if not sta_if.isconnected():\n",
+    "    print(\"Connecting to SSID\", ssid)\n",
+    "    sta_if.active(True)\n",
+    "    sta_if.connect(ssid, password)\n",
+    "    while not sta_if.isconnected():\n",
+    "        pass\n",
+    "print(\"Connected! IP = \", sta_if.ifconfig()[0])\n",
+    "\n",
+    "#oled.text(\"IP: \" + sta_if.ifconfig()[0], 0, 30)\n",
+    "#oled.show()\n",
+    "#time.sleep(0.25)\n",
+    "\n",
+    "rtc = machine.RTC()\n",
+    "\n",
+    "# Sync RTC over NTP\n",
+    "if not rtc.synced():\n",
+    "    rtc.ntp_sync(server=\"hr.pool.ntp.org\", tz=\"CET-1CEST\")\n",
+    "    while not rtc.synced():\n",
+    "        pass\n",
+    "    print(utime.gmtime())\n",
+    "    print(utime.localtime())\n",
+    "\n",
+    "# Send MQtt message\n",
+    "def conncb(task):\n",
+    "    print(\"[{}] Connected\".format(task))\n",
+    "\n",
+    "def disconncb(task):\n",
+    "    print(\"[{}] Disconnected\".format(task))\n",
+    "\n",
+    "def subscb(task):\n",
+    "    print(\"[{}] Subscribed\".format(task))\n",
+    "\n",
+    "def pubcb(pub):\n",
+    "    print(\"[{}] Published: {}\".format(pub[0], pub[1]))\n",
+    "\n",
+    "def datacb(msg):\n",
+    "    print(\"[{}] Data arrived from topic: {}, Message:\\n\".format(msg[0], msg[1]), msg[2])\n",
+    "\n",
+    "mqtt = network.mqtt(\"does\", \"mqtt://10.0.29.187\", user=\"user\", password=\"pass\", cleansession=True, connected_cb=conncb, disconnected_cb=disconncb, subscribed_cb=subscb, published_cb=pubcb, data_cb=datacb)\n",
+    "\n",
+    "# secure connection requires more memory and may not work\n",
+    "#mqtts = network.mqtt(\"eclipse\", \"mqtts://iot.eclipse.org\", cleansession=True, data_cb=datacb)\n",
+    "\n",
+    "# mqtt over Websocket can also be used\n",
+    "# mqttws = network.mqtt(\"eclipse\", \"ws://iot.eclipse.org:80\", cleansession=True, data_cb=datacb)\n",
+    "# mqttwss = network.mqtt(\"eclipse\", \"wss://iot.eclipse.org:80\", cleansession=True, data_cb=datacb)\n",
+    "\n",
+    "# Start the mqtt\n",
+    "print(\"Connecting to MQtt\")\n",
+    "oled.text(\"Publishing Msg\", 0, 20)\n",
+    "oled.show()\n",
+    "\n",
+    "mqtt.start()\n",
+    "\n",
+    "# Wait until status is: (1, 'Connected')\n",
+    "while mqtt.status()[0] < 2:\n",
+    "    print(mqtt.status())\n",
+    "    time.sleep(1)\n",
+    "\n",
+    "#mqtt.subscribe('test')\n",
+    "mqtt.publish('button/' + ubinascii.hexlify(machine.unique_id()).decode('ascii'), 'woke up')\n",
+    "\n",
+    "oled.text(\"Done. Sleeping\", 0, 30)\n",
+    "oled.show()\n",
+    "\n",
+    "i2c.deinit()\n",
+    "\n",
+    "# Debug\n",
+    "time.sleep(1)\n",
+    "\n",
+    "# Setup Sleep (wake on button press)\n",
+    "pin=machine.Pin(0)\n",
+    "pin.init(mode=pin.IN, pull=pin.PULL_UP)\n",
+    "rtc.wake_on_ext0(pin, 0)\n",
+    "\n",
+    "print(\"Sleeping...\")\n",
+    "machine.deepsleep()\n"
+   ]
+  }
+ ],
+ "metadata": {
+  "kernelspec": {
+   "display_name": "MicroPython - USB",
+   "language": "micropython",
+   "name": "micropython"
+  },
+  "language_info": {
+   "codemirror_mode": "python",
+   "file_extension": ".py",
+   "mimetype": "text/python",
+   "name": "micropython"
+  }
+ },
+ "nbformat": 4,
+ "nbformat_minor": 2
+}