gmoccapy: take starting values for spindle bar from INI file

configs/sim/gmoccapy/gmoccapy.ini

@@ -26,16 +26,16 @@ MAX_FEED_OVERRIDE      = 1.5
 MAX_SPINDLE_0_OVERRIDE = 1.2
 MIN_SPINDLE_0_OVERRIDE = 0.5
 
-# Initial value for spindle speed
-DEFAULT_SPINDLE_0_SPEED = 450
+# Initial values for spindle speed settings
+DEFAULT_SPINDLE_0_SPEED = 500
+MIN_SPINDLE_0_SPEED     = 0
+MAX_SPINDLE_0_SPEED     = 3000
 
 # Those are not used, added here to suppress warnings
 # see TRAJ section
 MIN_LINEAR_VELOCITY     = 0
 MAX_LINEAR_VELOCITY     = 166
 DEFAULT_LINEAR_VELOCITY = 100
-MIN_SPINDLE_0_SPEED     = 0
-MAX_SPINDLE_0_SPEED     = 3000
 
 # Prefix to be used
 PROGRAM_PREFIX = ../../nc_files/

docs/src/gui/gmoccapy.adoc

@@ -110,8 +110,11 @@ So let us take a closer look at the INI file and what you need to include to use
 DISPLAY = gmoccapy
 PREFERENCE_FILE_PATH = gmoccapy_preferences
 MAX_FEED_OVERRIDE = 1.5
-MAX_SPINDLE_OVERRIDE = 1.2
-MIN_SPINDLE_OVERRIDE = 0.5
+MAX_SPINDLE_0_OVERRIDE = 1.2
+MIN_SPINDLE_0_OVERRIDE = 0.5
+DEFAULT_SPINDLE_0_SPEED = 500
+MIN_SPINDLE_0_SPEED     = 0
+MAX_SPINDLE_0_SPEED     = 3000
 LATHE = 1
 BACK_TOOL_LATHE = 1
 PROGRAM_PREFIX = ../../nc_files/
@@ -134,7 +137,7 @@ If you only want to use one file for several machines, you need to include `PREF
 [NOTE]
 If no value is given, it will be set to 1.0.
 
-- _MIN_SPINDLE_OVERRIDE = 0.5_ and _MAX_SPINDLE_OVERRIDE = 1.2_ - Will allow you to change the spindle override within a limit from 50% to 120%.
+- _MIN_SPINDLE_0_OVERRIDE = 0.5_ and _MAX_SPINDLE_0_OVERRIDE = 1.2_ - Will allow you to change the spindle override within a limit from 50% to 120%.
 +
 [NOTE]
 If no values are given, MIN will be set to 0.1 and MAX to 1.0.
@@ -171,8 +174,8 @@ First `linuxcnc/nc_files` and then the users home directory.
 If not set, half of 'MAX_LINEAR_VELOCITY' will be used.
 If that value is also not given, it will default to 180.
 
-// max. jog velocity?
 - _MAX_LINEAR_VELOCITY = 230.0_ - Sets the maximal velocity of the machine.
+This value will also be the maximum linear jog velocity.
 +
 [NOTE]
 Defaults to 600 if not set.
@@ -501,9 +504,10 @@ DISPLAY = gmoccapy <log_level_param>
 using these parameters:
 ----
 Log level   <log_level_param>
+VERBOSE     -v
 DEBUG       -d
 INFO        -i
-VERBOSE     -v
+WARNING     -w
 ERROR       -q
 ----
 
@@ -1296,7 +1300,7 @@ By default all scales are set using the calculation:
 (MAX - MIN)/100
 ----
 
-
+[[gmoccapy-settings-spindle]]
 .Spindle
 * _Starting RPM_ - Sets the rpm to be used if the spindle is started and no S value has been set.
 +

src/emc/usr_intf/gmoccapy/gmoccapy.py

@@ -582,8 +582,11 @@ def _get_pref_data(self):
         self.scale_rapid_override = self.prefs.getpref("scale_rapid_override", 1, float)
 
         # the velocity settings
-        self.min_spindle_rev = self.prefs.getpref("spindle_bar_min", 0.0, float)
-        self.max_spindle_rev = self.prefs.getpref("spindle_bar_max", 6000.0, float)
+        # if there is a INI Entry for default, min and max spindle speed, we will use that one as default
+        # but if there is a setting in our preference file, that one will ignore the INI entry
+        self.spindle_start_rpm = self.prefs.getpref( 'spindle_start_rpm', self.INI.DEFAULT_SPINDLE_0_SPEED, float )
+        self.min_spindle_rev = self.prefs.getpref("spindle_bar_min", self.INI.MIN_SPINDLE_0_SPEED, float)
+        self.max_spindle_rev = self.prefs.getpref("spindle_bar_max", self.INI.MAX_SPINDLE_0_SPEED, float)
 
         self.turtle_jog_factor = self.prefs.getpref('turtle_jog_factor', 20, int)
         self.hide_turtle_jog_button = self.prefs.getpref("hide_turtle_jog_button", False, bool)
@@ -592,10 +595,6 @@ def _get_pref_data(self):
 
         self.toggle_readout = self.prefs.getpref("toggle_readout", True, bool)
 
-        # if there is a INI Entry for default spindle speed, we will use that one as default
-        # but if there is a setting in our preference file, that one will beet the INI entry
-        default_spindle_speed = self.INI.DEFAULT_SPINDLE_0_SPEED
-        self.spindle_start_rpm = self.prefs.getpref( 'spindle_start_rpm', default_spindle_speed, float )
 
         self.kbd_height = self.prefs.getpref("kbd_height", 250, int)
         self.kbd_width = self.prefs.getpref("kbd_width", 880, int)