Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Update device_profiles.md - Added W5500 configuration #15

Merged
merged 1 commit into from
Sep 13, 2024
Merged

Update device_profiles.md - Added W5500 configuration #15

Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
6 changes: 6 additions & 0 deletions docs/firmware/device_profiles.md
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -200,6 +200,12 @@ the respective parameters. If any parameter is not set, the default value `-1`
| eth.mdio | number | Serial Management Interface MDIO Pin. Use -1 for not assigned pins. |
| eth.type | number | Possible values:<ul><li>0 = ETH_PHY_LAN8720</li><li>1 = ETH_PHY_TLK110</li><li>2 = ETH_PHY_RTL8201</li><li>3 = ETH_PHY_DP83848</li><li>4 = ETH_PHY_DM9051</li><li>5 = ETH_PHY_KSZ8041</li><li>6 = ETH_PHY_KSZ8081</li></ul> |
| eth.clk_mode | number | Possible values:<ul><li>0 = ETH_CLOCK_GPIO0_IN</li><li>1 = ETH_CLOCK_GPIO0_OUT</li><li>2 = ETH_CLOCK_GPIO16_OUT</li><li>3 = ETH_CLOCK_GPIO17_OUT</li></ul> |
| w5500.sclk | number | W5500 SPI Clock Pin |
| w5500.mosi | number | W5500 MOSI Pin |
| w5500.miso | number | W5500 MISO Pin |
| w5500.cs | number | W5500 Chip Select Pin |
| w5500.int | number | W5500 Interrupt Pin |
| w5500.rst | number | W5500 Reset Pin |
| display.type | number | Specify type of display. Possible values:<ul><li>0 = None (default)</li><li>1 = PCD8544</li><li>2 = SSD1306</li><li>3 = SH1106</li><li>4 = SSD1309</li><li>5 = ST7567S GM12864-59N</li></ul> |
| display.data | number | Data Pin (e.g. SDA for i2c displays) required for all displays. Use 255 for not assigned pins. |
| display.clk | number | Clock Pin (e.g. SCL for i2c displays) required for SSD1306 and SH1106. Use 255 for not assigned pins. |
Expand Down