Release 24.1226 (XCF 2.4 inch)

One new feature:

• Support to setup inverted polartity on RS232 signal for flarms with non TTL specification on RS232 interface e.g. ECW100
• New Flarm database based on Flarmnet state of December 26 2024

Release 24.1226 (XCF 1.47 inch)

New feature:

• Support to setup inverted polartity on RS232 signal for flarms with non TTL specification on RS232 interface e.g. ECW100
• New Flarm database based on Flarmnet state of December 26 2024

Release 24.1201 (XCF 1.47 inch)

Several new features and fixes and TEK compensation

• Show Autobaud baud-rate in start screen when automatic search is ongoing (new feature)
• A solution for climb indication for competition flying ( #5 (comment) ) (new feature)
• Display Flarm RX together with number of targets received e.g. (RX 2) (new feature)
• Buzzer queue flush when new alarm level comes in (improvement)
• Datamonitor to monitor serial data stream that comes in (new feature)
• Info screen to display Flarms SW&HW version (new feature)
• Display progress on IGC File upload (e.g. to SD disk), or FW update in percent (new feature)
• Display Flarm alarm's, color by severity, in cleartext e.g. "Obstacle database invalid" (new feature)
• Increase capability to read from serial line (larger buffer and less sleep time) (improvement)
• Task prio's adapted, fix potential artifacts that may have occurred in rare situations (fix epic bug)

Note, replaces former release from 1128 and includes improved TEK compensation for indicated best climb rate

Release 24.1201 (XCF 2.4 inch) Latest

Several new features and fixes
NOTE: For the larger 2.4 inch XCFlarmView only

• Show Autobaud baud-rate in start screen when automatic search is ongoing (new feature)
• A solution for climb indication for competition flying ( #5 (comment) ) (new feature)
• Display Flarm RX together with number of targets received e.g. (RX 2) (new feature)
• Buzzer queue flush when new alarm level comes in (improvement)
• Datamonitor to monitor serial data stream that comes in (new feature)
• Info screen to display Flarms SW&HW version (new feature)
• Display progress on IGC File upload (e.g. to SD disk), or FW update in percent (new feature)
• Display Flarm alarm's, color by severity, in cleartext e.g. "Obstacle database invalid" (new feature)
• Increase capability to read from serial line (larger buffer and less sleep time) (improvement)
• Task prio's adapted, fix potential artifacts that may have occurred in rare situations (fix epic bug)

Note, replaces former release from 1128 and includes improved TEK compensation for indicated best climb rate

Release 24.0927 (XCF 1.47 inch)

Several new features and fixes.

• Option to mute head up buzzer (dah-dih) for new aircraft
• Display software and hardware version of Flarm on Startup (new feature)
• Display Flarm alarms and progress information transparently on screen (e.g. firmare Update, IGC file download)
• New "Serial Monitor" in setup menu to monitor serial data
• Increase prio of task handling the push button (better and more direct response)
• Fix typo in startup screen XV instead XC (fix)
• Shift aircraft ID a bit to the left to prevent last char clipped (fix)

Release 24.0513 (XCF 1.47 inch)

• Display or hide non moving targets (new feature)
• Optimize head up beep (improvement)
• Ensure ID to be updated (bugfix)
• Latest Flarmnet/OGN database

Release 24.0509 (XCF 1.47 inch)

• Configure TX pin to high impedance to improve parallel operation: Allows Task declaration or flight download on Flarm when display is parallel with a Navi on same serial line. (improvement)
• Latest Flarmnet/OGN database

Release 24.0422 (XCF 1.47 inch)

Two improvements for software update:

• Check filename and enable upload button only on correct build (for 1.47 inch) selected
• Change WiFi SSID to "ESP32 OTA XCF" to enable an individual password being stored
• Latest FLARMNET/OGN database

Release 24.0410 (XCV 1.47 inch)

Latest build with converged sourcecode from 2.4 inch development (no functional change) but comes with latest Flarmnet 00b975 (and OGN) database.

Release 24.0408 (XCV 1.47 inch)

• Integrated OGN glidernet database ( http://ddb.glidernet.org/download ), in total there are now >32.000 entries
• Implememted simple mode showing one target only
• Fixed possible artefacts in info fields