Linux 3.4.110

Documentation/networking/pktgen.txt

@@ -24,47 +24,66 @@ For monitoring and control pktgen creates:
         /proc/net/pktgen/ethX
 
 
-Viewing threads
-===============
-/proc/net/pktgen/kpktgend_0 
-Name: kpktgend_0  max_before_softirq: 10000
-Running: 
-Stopped: eth1 
-Result: OK: max_before_softirq=10000
+Kernel threads
+==============
+Pktgen creates a thread for each CPU with affinity to that CPU.
+Which is controlled through procfile /proc/net/pktgen/kpktgend_X.
+
+Example: /proc/net/pktgen/kpktgend_0
+
+ Running:
+ Stopped: eth4@0
+ Result: OK: add_device=eth4@0
+
+Most important are the devices assigned to the thread.
 
-Most important the devices assigned to thread. Note! A device can only belong 
-to one thread.
+The two basic thread commands are:
+ * add_device DEVICE@NAME -- adds a single device
+ * rem_device_all         -- remove all associated devices
 
+When adding a device to a thread, a corrosponding procfile is created
+which is used for configuring this device. Thus, device names need to
+be unique.
+
+To support adding the same device to multiple threads, which is useful
+with multi queue NICs, a the device naming scheme is extended with "@":
+ device@something
+
+The part after "@" can be anything, but it is custom to use the thread
+number.
 
 Viewing devices
 ===============
 
 Parm section holds configured info. Current hold running stats. 
 Result is printed after run or after interruption. Example:
 
-/proc/net/pktgen/eth1       
+/proc/net/pktgen/eth4@0
 
-Params: count 10000000  min_pkt_size: 60  max_pkt_size: 60
-     frags: 0  delay: 0  clone_skb: 1000000  ifname: eth1
+ Params: count 100000  min_pkt_size: 60  max_pkt_size: 60
+     frags: 0  delay: 0  clone_skb: 64  ifname: eth4@0
      flows: 0 flowlen: 0
-     dst_min: 10.10.11.2  dst_max: 
-     src_min:   src_max: 
-     src_mac: 00:00:00:00:00:00  dst_mac: 00:04:23:AC:FD:82
-     udp_src_min: 9  udp_src_max: 9  udp_dst_min: 9  udp_dst_max: 9
-     src_mac_count: 0  dst_mac_count: 0 
-     Flags: 
-Current:
-     pkts-sofar: 10000000  errors: 39664
-     started: 1103053986245187us  stopped: 1103053999346329us idle: 880401us
-     seq_num: 10000011  cur_dst_mac_offset: 0  cur_src_mac_offset: 0
-     cur_saddr: 0x10a0a0a  cur_daddr: 0x20b0a0a
-     cur_udp_dst: 9  cur_udp_src: 9
+     queue_map_min: 0  queue_map_max: 0
+     dst_min: 192.168.81.2  dst_max:
+     src_min:   src_max:
+     src_mac: 90:e2:ba:0a:56:b4 dst_mac: 00:1b:21:3c:9d:f8
+     udp_src_min: 9  udp_src_max: 109  udp_dst_min: 9  udp_dst_max: 9
+     src_mac_count: 0  dst_mac_count: 0
+     Flags: UDPSRC_RND  NO_TIMESTAMP  QUEUE_MAP_CPU
+ Current:
+     pkts-sofar: 100000  errors: 0
+     started: 623913381008us  stopped: 623913396439us idle: 25us
+     seq_num: 100001  cur_dst_mac_offset: 0  cur_src_mac_offset: 0
+     cur_saddr: 192.168.8.3  cur_daddr: 192.168.81.2
+     cur_udp_dst: 9  cur_udp_src: 42
+     cur_queue_map: 
      flows: 0
-Result: OK: 13101142(c12220741+d880401) usec, 10000000 (60byte,0frags)
-  763292pps 390Mb/sec (390805504bps) errors: 39664
+ Result: OK: 15430(c15405d25) usec, 100000 (60byte,0frags)
+  6480562pps 3110Mb/sec (3110669760bps) errors: 0
 
-Configuring threads and devices
-================================
+
+Configuring devices
+===================
 This is done via the /proc interface easiest done via pgset in the scripts
 
 Examples:
@@ -177,6 +196,8 @@ Note when adding devices to a specific CPU there good idea to also assign
 /proc/irq/XX/smp_affinity so the TX-interrupts gets bound to the same CPU.
 as this reduces cache bouncing when freeing skb's.
 
+Plus using the device flag QUEUE_MAP_CPU, which maps the SKBs TX queue
+to the running threads CPU (directly from smp_processor_id()).
 
 Current commands and configuration options
 ==========================================

Makefile

@@ -1,6 +1,6 @@
 VERSION = 3
 PATCHLEVEL = 4
-SUBLEVEL = 109
+SUBLEVEL = 110
 EXTRAVERSION =
 NAME = Saber-toothed Squirrel
 

arch/arm/net/bpf_jit_32.c

@@ -899,7 +899,7 @@ void bpf_jit_compile(struct sk_filter *fp)
 		if (ctx.imm_count)
 			kfree(ctx.imms);
 #endif
-		bpf_jit_binary_free(header);
+		module_free(NULL, ctx.target);
 		goto out;
 	}
 	build_epilogue(&ctx);

arch/s390/crypto/ghash_s390.c

@@ -115,7 +115,7 @@ static int ghash_final(struct shash_desc *desc, u8 *dst)
 	struct ghash_desc_ctx *dctx = shash_desc_ctx(desc);
 
 	ghash_flush(dctx);
-	memcpy(dst, dtx->icv, GHASH_BLOCK_SIZE);
+	memcpy(dst, dctx->icv, GHASH_BLOCK_SIZE);
 
 	return 0;
 }

arch/x86/include/asm/kvm_host.h

@@ -509,7 +509,7 @@ struct kvm_arch {
 	struct kvm_pic *vpic;
 	struct kvm_ioapic *vioapic;
 	struct kvm_pit *vpit;
-	int vapics_in_nmi_mode;
+	atomic_t vapics_in_nmi_mode;
 
 	unsigned int tss_addr;
 	struct page *apic_access_page;

arch/x86/kvm/i8254.c

@@ -317,7 +317,7 @@ static void pit_do_work(struct work_struct *work)
 		 * LVT0 to NMI delivery. Other PIC interrupts are just sent to
 		 * VCPU0, and only if its LVT0 is in EXTINT mode.
 		 */
-		if (kvm->arch.vapics_in_nmi_mode > 0)
+		if (atomic_read(&kvm->arch.vapics_in_nmi_mode) > 0)
 			kvm_for_each_vcpu(i, vcpu, kvm)
 				kvm_apic_nmi_wd_deliver(vcpu);
 	}

arch/x86/kvm/lapic.c

@@ -761,10 +761,10 @@ static void apic_manage_nmi_watchdog(struct kvm_lapic *apic, u32 lvt0_val)
 		if (!nmi_wd_enabled) {
 			apic_debug("Receive NMI setting on APIC_LVT0 "
 				   "for cpu %d\n", apic->vcpu->vcpu_id);
-			apic->vcpu->kvm->arch.vapics_in_nmi_mode++;
+			atomic_inc(&apic->vcpu->kvm->arch.vapics_in_nmi_mode);
 		}
 	} else if (nmi_wd_enabled)
-		apic->vcpu->kvm->arch.vapics_in_nmi_mode--;
+		atomic_dec(&apic->vcpu->kvm->arch.vapics_in_nmi_mode);
 }
 
 static int apic_reg_write(struct kvm_lapic *apic, u32 reg, u32 val)
@@ -1257,6 +1257,7 @@ void kvm_apic_post_state_restore(struct kvm_vcpu *vcpu)
 
 	apic_update_ppr(apic);
 	hrtimer_cancel(&apic->lapic_timer.timer);
+	apic_manage_nmi_watchdog(apic, apic_get_reg(apic, APIC_LVT0));
 	update_divide_count(apic);
 	start_apic_timer(apic);
 	apic->irr_pending = true;

arch/x86/pci/acpi.c

@@ -70,6 +70,17 @@ static const struct dmi_system_id pci_use_crs_table[] __initconst = {
 			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
 		},
 	},
+	/* https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/931368 */
+	/* https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1033299 */
+	{
+		.callback = set_use_crs,
+		.ident = "Foxconn K8M890-8237A",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Foxconn"),
+			DMI_MATCH(DMI_BOARD_NAME, "K8M890-8237A"),
+			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
+		},
+	},
 
 	/* Now for the blacklist.. */
 

drivers/acpi/acpica/utxface.c

@@ -166,10 +166,12 @@ acpi_status acpi_enable_subsystem(u32 flags)
 	 * Obtain a permanent mapping for the FACS. This is required for the
 	 * Global Lock and the Firmware Waking Vector
 	 */
-	status = acpi_tb_initialize_facs();
-	if (ACPI_FAILURE(status)) {
-		ACPI_WARNING((AE_INFO, "Could not map the FACS table"));
-		return_ACPI_STATUS(status);
+	if (!(flags & ACPI_NO_FACS_INIT)) {
+		status = acpi_tb_initialize_facs();
+		if (ACPI_FAILURE(status)) {
+			ACPI_WARNING((AE_INFO, "Could not map the FACS table"));
+			return_ACPI_STATUS(status);
+		}
 	}
 #endif				/* !ACPI_REDUCED_HARDWARE */
 

drivers/base/regmap/regmap.c

@@ -784,7 +784,7 @@ int regmap_bulk_read(struct regmap *map, unsigned int reg, void *val,
 			ret = regmap_read(map, reg + i, &ival);
 			if (ret != 0)
 				return ret;
-			memcpy(val + (i * val_bytes), &ival, val_bytes);
+			map->format.format_val(val + (i * val_bytes), ival);
 		}
 	}
 

drivers/bluetooth/ath3k.c

@@ -103,6 +103,7 @@ static struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3408) },
 	{ USB_DEVICE(0x13d3, 0x3423) },
 	{ USB_DEVICE(0x13d3, 0x3432) },
+	{ USB_DEVICE(0x13d3, 0x3474) },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE02C) },
@@ -152,6 +153,7 @@ static struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU22 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },

drivers/bluetooth/btusb.c

@@ -182,6 +182,7 @@ static struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },

drivers/char/agp/intel-gtt.c

@@ -1194,7 +1194,7 @@ static inline int needs_idle_maps(void)
 	/* Query intel_iommu to see if we need the workaround. Presumably that
 	 * was loaded first.
 	 */
-	if ((gpu_devid == PCI_DEVICE_ID_INTEL_IRONLAKE_M_HB ||
+	if ((gpu_devid == PCI_DEVICE_ID_INTEL_IRONLAKE_D_IG ||
 	     gpu_devid == PCI_DEVICE_ID_INTEL_IRONLAKE_M_IG) &&
 	     intel_iommu_gfx_mapped)
 		return 1;

drivers/crypto/talitos.c

@@ -2653,6 +2653,7 @@ static struct talitos_crypto_alg *talitos_alg_alloc(struct device *dev,
 		break;
 	default:
 		dev_err(dev, "unknown algorithm type %d\n", t_alg->algt.type);
+		kfree(t_alg);
 		return ERR_PTR(-EINVAL);
 	}
 

drivers/dma/mv_xor.c

@@ -390,7 +390,8 @@ static void __mv_xor_slot_cleanup(struct mv_xor_chan *mv_chan)
 	dma_cookie_t cookie = 0;
 	int busy = mv_chan_is_busy(mv_chan);
 	u32 current_desc = mv_chan_get_current_desc(mv_chan);
-	int seen_current = 0;
+	int current_cleaned = 0;
+	struct mv_xor_desc *hw_desc;
 
 	dev_dbg(mv_chan->device->common.dev, "%s %d\n", __func__, __LINE__);
 	dev_dbg(mv_chan->device->common.dev, "current_desc %x\n", current_desc);
@@ -402,38 +403,57 @@ static void __mv_xor_slot_cleanup(struct mv_xor_chan *mv_chan)
 
 	list_for_each_entry_safe(iter, _iter, &mv_chan->chain,
 					chain_node) {
-		prefetch(_iter);
-		prefetch(&_iter->async_tx);
 
-		/* do not advance past the current descriptor loaded into the
-		 * hardware channel, subsequent descriptors are either in
-		 * process or have not been submitted
-		 */
-		if (seen_current)
-			break;
+		/* clean finished descriptors */
+		hw_desc = iter->hw_desc;
+		if (hw_desc->status & XOR_DESC_SUCCESS) {
+			cookie = mv_xor_run_tx_complete_actions(iter, mv_chan,
+								cookie);
 
-		/* stop the search if we reach the current descriptor and the
-		 * channel is busy
-		 */
-		if (iter->async_tx.phys == current_desc) {
-			seen_current = 1;
-			if (busy)
+			/* done processing desc, clean slot */
+			mv_xor_clean_slot(iter, mv_chan);
+
+			/* break if we did cleaned the current */
+			if (iter->async_tx.phys == current_desc) {
+				current_cleaned = 1;
+				break;
+			}
+		} else {
+			if (iter->async_tx.phys == current_desc) {
+				current_cleaned = 0;
 				break;
+			}
 		}
-
-		cookie = mv_xor_run_tx_complete_actions(iter, mv_chan, cookie);
-
-		if (mv_xor_clean_slot(iter, mv_chan))
-			break;
 	}
 
 	if ((busy == 0) && !list_empty(&mv_chan->chain)) {
-		struct mv_xor_desc_slot *chain_head;
-		chain_head = list_entry(mv_chan->chain.next,
-					struct mv_xor_desc_slot,
-					chain_node);
-
-		mv_xor_start_new_chain(mv_chan, chain_head);
+		if (current_cleaned) {
+			/*
+			 * current descriptor cleaned and removed, run
+			 * from list head
+			 */
+			iter = list_entry(mv_chan->chain.next,
+					  struct mv_xor_desc_slot,
+					  chain_node);
+			mv_xor_start_new_chain(mv_chan, iter);
+		} else {
+			if (!list_is_last(&iter->chain_node, &mv_chan->chain)) {
+				/*
+				 * descriptors are still waiting after
+				 * current, trigger them
+				 */
+				iter = list_entry(iter->chain_node.next,
+						  struct mv_xor_desc_slot,
+						  chain_node);
+				mv_xor_start_new_chain(mv_chan, iter);
+			} else {
+				/*
+				 * some descriptors are still waiting
+				 * to be cleaned
+				 */
+				tasklet_schedule(&mv_chan->irq_tasklet);
+			}
+		}
 	}
 
 	if (cookie > 0)

drivers/dma/mv_xor.h

@@ -30,6 +30,7 @@
 #define XOR_OPERATION_MODE_XOR		0
 #define XOR_OPERATION_MODE_MEMCPY	2
 #define XOR_OPERATION_MODE_MEMSET	4
+#define XOR_DESC_SUCCESS		0x40000000
 
 #define XOR_CURR_DESC(chan)	(chan->mmr_base + 0x210 + (chan->idx * 4))
 #define XOR_NEXT_DESC(chan)	(chan->mmr_base + 0x200 + (chan->idx * 4))

drivers/gpu/drm/i915/i915_gem.c

@@ -1779,6 +1779,9 @@ i915_gem_retire_requests_ring(struct intel_ring_buffer *ring)
 	uint32_t seqno;
 	int i;
 
+	if (list_empty(&ring->request_list))
+		return;
+
 	WARN_ON(i915_verify_lists(ring->dev));
 
 	seqno = ring->get_seqno(ring);

drivers/gpu/drm/radeon/evergreen.c

@@ -1079,7 +1079,7 @@ int evergreen_pcie_gart_enable(struct radeon_device *rdev)
 	WREG32(MC_VM_MB_L1_TLB2_CNTL, tmp);
 	WREG32(MC_VM_MB_L1_TLB3_CNTL, tmp);
 	WREG32(VM_CONTEXT0_PAGE_TABLE_START_ADDR, rdev->mc.gtt_start >> 12);
-	WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, (rdev->mc.gtt_end >> 12) - 1);
+	WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, rdev->mc.gtt_end >> 12);
 	WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR, rdev->gart.table_addr >> 12);
 	WREG32(VM_CONTEXT0_CNTL, ENABLE_CONTEXT | PAGE_TABLE_DEPTH(0) |
 				RANGE_PROTECTION_FAULT_ENABLE_DEFAULT);

drivers/gpu/drm/radeon/ni.c

@@ -1075,7 +1075,7 @@ int cayman_pcie_gart_enable(struct radeon_device *rdev)
 	       L2_CACHE_BIGK_FRAGMENT_SIZE(6));
 	/* setup context0 */
 	WREG32(VM_CONTEXT0_PAGE_TABLE_START_ADDR, rdev->mc.gtt_start >> 12);
-	WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, (rdev->mc.gtt_end >> 12) - 1);
+	WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, rdev->mc.gtt_end >> 12);
 	WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR, rdev->gart.table_addr >> 12);
 	WREG32(VM_CONTEXT0_PROTECTION_FAULT_DEFAULT_ADDR,
 			(u32)(rdev->dummy_page.addr >> 12));

drivers/gpu/drm/radeon/r600.c

@@ -930,7 +930,7 @@ int r600_pcie_gart_enable(struct radeon_device *rdev)
 	WREG32(MC_VM_L1_TLB_MCB_RD_SEM_CNTL, tmp | ENABLE_SEMAPHORE_MODE);
 	WREG32(MC_VM_L1_TLB_MCB_WR_SEM_CNTL, tmp | ENABLE_SEMAPHORE_MODE);
 	WREG32(VM_CONTEXT0_PAGE_TABLE_START_ADDR, rdev->mc.gtt_start >> 12);
-	WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, (rdev->mc.gtt_end >> 12) - 1);
+	WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, rdev->mc.gtt_end >> 12);
 	WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR, rdev->gart.table_addr >> 12);
 	WREG32(VM_CONTEXT0_CNTL, ENABLE_CONTEXT | PAGE_TABLE_DEPTH(0) |
 				RANGE_PROTECTION_FAULT_ENABLE_DEFAULT);