ebusd for Brink Renovent Excellent 300

Requirements

• eBus USB Adapter
• ebusd daemon

Setup and Usage

1. Copy the config file 3c.csv to /home/pi/encon/3c.csv on the Raspberry Pi.

2. Open a shell and start the ebusd daemon (assume that the eBus USB Adapter is connected to /dev/ttyUSB1):

   $ ebusd -f --logareas bus --loglevel info -d /dev/ttyUSB1 -c /home/pi/
   2017-02-10 17:51:23.365 [bus notice] signal acquired
   2017-02-10 17:51:23.968 [bus notice] new master 37, master count
   

3. Open a second shell and use the ebusd ebusctl command-line tool to read or write the defined parameters of the Brink Renovent Excellent 300.

   For example:

   $ ebusctl read Aussenlufttemperatur
   9.6
   $
   $ ebusctl read BetriebsstundenTotal
   15155;32768;32767;1;0
   $
   $ ebusctl read SoftwareVersion
   S1.05.07 0004
   

The shell script test.sh can be used to query all defined parameters in 3c.csv:

$ ./test.sh
done

SoftwareVersion
S1.05.07 0004

Press any key to continue...
Ventilatorbetrieb
Feuchteschutz

Press any key to continue...
TatsaechlicheDrehzahlZuluft
1056

...

Note: Another config file for the Brink Renovent Sky 300 from paddyx (Patrick K.) can be found here. It should be also compatible with the Brink Renovent Excellent 300.