Stable 1.5 mg master osprh 7722 32244 32175 edits to stf #542
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Reset the history at this point to re-align to master. These changes are the ones that apply specifically to the stable-1.5 branch. The git history prior to this change was resulting in a very disconnected history so we decided to re-align it to master to make future imports simpler.
…tf.yaml (#504) (#506) Tracker: https://bugzilla.redhat.com/show_bug.cgi?id=2239871 Branch: master-BZ-2239871
* Fix xrefs for director Operator (#481) Fix the xrefs for the director Operator. The xrefs were referring to the filename instead of the id+assembly value. * Initial pass for external ES (#483) * Initial pass for external ES * Updates for external ES * Notice about deprecated behaviour * Mention how the migration works (automatically) * Adjust comments about observabilityStrategy: none ** Events SGs will now deploy if events are enabled ** Adjusted relevant outputs * Apply suggestions from code review Co-authored-by: Leif Madsen <[email protected]> * Minor adjustments from review --------- Co-authored-by: Leif Madsen <[email protected]> * Trivial leftover suggestions (#485) * Trivial leftover suggestions * Link ES section to KB article (#486) * Link ES section to KB article * Update doc-Service-Telemetry-Framework/modules/con_primary-parameters-of-the-servicetelemetry-object.adoc --------- Co-authored-by: Leif Madsen <[email protected]> * Initial changes to installation for STF 1.5.3 (#484) * Initial changes to installation for STF 1.5.3 Make the initial changes to the installation documentation for STF 1.5.3, which uses observabilityStrategy: use_redhat by default along with preferring to install Observability Operator. Uses the community operators catalogsource for now until OBO is officially available from redhat-operators CatalogSource. Updates the Makefile as well to include Red Hat OpenStack Platform 17.1. Signed-off-by: Leif Madsen <[email protected]> * Update install guide for pre-installed Operators Update the installation guide layout for pre-installed Operators that cannot be managed with OLM (due to them being cluster-scoped Operators vs namespace-scoped Operators). Resolves: STF-1485 Signed-off-by: Leif Madsen <[email protected]> * Update doc-Service-Telemetry-Framework/modules/proc_deploying-stf-to-the-openshift-environment.adoc Co-authored-by: mickogeary <[email protected]> * Update doc-Service-Telemetry-Framework/modules/proc_deploying-stf-to-the-openshift-environment.adoc Co-authored-by: mickogeary <[email protected]> * Update doc-Service-Telemetry-Framework/modules/proc_deploying-stf-to-the-openshift-environment.adoc Co-authored-by: mickogeary <[email protected]> * Update doc-Service-Telemetry-Framework/modules/proc_deploying-stf-to-the-openshift-environment.adoc Co-authored-by: mickogeary <[email protected]> * Adjust wording for cert-manager installation module * Update doc-Service-Telemetry-Framework/modules/proc_deploying-stf-to-the-openshift-environment.adoc Co-authored-by: mickogeary <[email protected]> * Reword section that repeats itself --------- Signed-off-by: Leif Madsen <[email protected]> Co-authored-by: mickogeary <[email protected]> * use_redhat and migration link (#462) * use_redhat and migration link * Update doc-Service-Telemetry-Framework/modules/con_observability-strategy.adoc Co-authored-by: Leif Madsen <[email protected]> * Update doc-Service-Telemetry-Framework/modules/con_observability-strategy.adoc Co-authored-by: Leif Madsen <[email protected]> * Update doc-Service-Telemetry-Framework/modules/con_observability-strategy.adoc Co-authored-by: Leif Madsen <[email protected]> * Apply suggestions from code review Co-authored-by: Leif Madsen <[email protected]> * Minor typo fix * Visual tweak * Update doc-Service-Telemetry-Framework/modules/con_observability-strategy.adoc Co-authored-by: Leif Madsen <[email protected]> * Update doc-Service-Telemetry-Framework/modules/con_observability-strategy.adoc Co-authored-by: Leif Madsen <[email protected]> --------- Co-authored-by: Leif Madsen <[email protected]> * Override qdr::router_id defaults in stf-connectors (#487) Update the documentation to provide an override to the FQDN in the qdr::router_id configuration to avoid hostnames longer than 61 chars. Closes rhbz#2208020 * Don't enable event collection by default on OSP (#488) * Don't enable event collection by default on OSP Closes STF-1498 * Remove events configurations and use defaults The defaults for events pipeline and Ceilometer QDR publish events is disabled and does not need to be called out specifically. * No longer import the events dashboard (#490) With a refocus on telemetry by default and without event usage, remove the event dashboards as an event data store is optional and no longer included by default. Related STF-1498 * Installation of cluster monitoring is no longer necessary (#491) Installation of cluster monitoring in CRC (and elsewhere) is no longer necessary for installation of STF. Resolved by #465 * Adjust the default polling interval for collectd (#489) Adjust the collectd polling interval to be 30 seconds instead of 5 seconds. Related STF-1512 Co-authored-by: Victoria Martinez de la Cruz <[email protected]> * Remove logs configuration from sample CR (#493) Related STF-1504 * mg_master_RHOSPDOC-1380_chunk-installation-procedure (#492) * mg_master_RHOSPDOC-1380_chunk-installation-procedure * mg_master_RHOSPDOC-1380_chunk-installation-procedure 2nd commoit with further modularisation and chunkage * Commit 3: renaming proc_deploying-stf-to-the-openshift-environment.adoc to con_deploying-stf-to-the-openshift-environment.adoc * Reduce the number of Ceilometer pollsters (#497) Reduce the number of Ceilometer pollsters to only those used by the sample STF dashboards. Closes: rhbz#2239390 * Deprecate the use of high availability mode in STF (#494) * Deprecate the use of high availability mode in STF Resolves STF-1507 * Update doc-Service-Telemetry-Framework/modules/con_high-availability.adoc Co-authored-by: mickogeary <[email protected]> --------- Co-authored-by: mickogeary <[email protected]> * Fix up the table syntax in Observability Strategy (#495) The existing table was in markdown format which isn't compatible with asciidoc syntax. * Do not manage the event pipeline by default (#498) We do not want events to be sent to QDR by default, as the STF 1.5.3 default configuration will deploy telemetry only Related STF-1498 * Minor clean up and user experience updates (#496) Some minor clean up items and convert some commands to be a bit more user friendly and generic Resolves STF-1533 * Creating an alert does not use curl (#500) The Creating a standard alert route in Alertmanager section no longer uses curl to verify the configuration was loaded, since it uses the prometheus pod and the wget command instance. Removes an extra procedure step that is no longer applicable. * Eliminate duplicate line (#501) * Adding details for QDR password auth (#502) * Adding details for QDR password auth * Move note about disabling auth to main section * Update doc-Service-Telemetry-Framework/modules/proc_retrieving-the-qdr-password.adoc Co-authored-by: Leif Madsen <[email protected]> * Update doc-Service-Telemetry-Framework/modules/proc_retrieving-the-qdr-password.adoc Co-authored-by: mickogeary <[email protected]> --------- Co-authored-by: Leif Madsen <[email protected]> Co-authored-by: mickogeary <[email protected]> * Support OCP versions 4.12 through 4.14 (#503) * Support OCP versions 4.12 through 4.14 Update the stf-attributes to cover OCP 4.12 through 4.14 as our default, as OCP 4.10 is EOL. Update the Makefile for building to only cover RHOSP 17.1 and 16.2. * Need html-latest for upstream publish script * Summary: Replace incorrect stf-connectors.yaml filename with enable-stf.yaml (#504) Tracker: https://bugzilla.redhat.com/show_bug.cgi?id=2239871 Branch: master-BZ-2239871 * Clean up the STF install (#505) * Clean up the STF install for OCP 4.12 and later Clean up the STF installation documentation along with a command that will wait for the STO CSV to be ready and then automatically show the dependencies. Also hide contents that are no longer applicable when the supported base version of OCP is greater than 4.10, since OCP 4.10 is now EOL. * Adjust the ifeval to be < 4.12 * Provide the preferred STF object for deployment (#507) Provide the preferred ServiceTelemetry object for deployments rather than asking the administrator to build a configuration. The provided object will result in a metrics-focused deployment without extra configuration options, which will be a foundation for disconnected installations in the future. * Fix various RHOSP links and versions (#508) Fix various links to RHOSP documentation as the paths are different between RHOSP 16.2 and 17.1. Guides were updated but there is no auto-redirect, so we'll need to verify every link that uses defaultURL parameter. This covers the initial ones while working through documentation. Update some older version links and add a new parameter for 17.1 paths specifically. * Update and adjust dashboard procedures (#509) Update and adjust the dashboard installation procedures based on testing. * Add deprecation note for Grafana authentication (#510) Deprecate the basic auth login parameters for Grafana login. Preference is to use the Log in for OpenShift button going forward. Fix syntax issues in asciidoc. * Update deprecated Grafana login warning (#511) Update the Grafana login deprecation warning with wording from the documentation team. * Add updated architecture diagrams (#499) * Add updated architecture diagrams * Use updated architecture diagrams * Update architecture overview to focus on metrics Update the architecture overview to make it clear STF is focused on delivery of metrics from RHOSP. Provide information about use_redhat observability strategy, and note that prior versions of STF would manage Elasticsearch instances. Note that new installations use the observability strategy of use_redhat, and that the guide will focus on that deployment model. Provide a placeholder for a new xref that would guide the user towards the deprecated architecture using events, where our updated metrics-and-events architecture diagram would live. * Link to observability strategy * Remove community components from core overview * Use ObservabilityOperator parameter to refer to OBO/COO * Update doc-Service-Telemetry-Framework/modules/con_stf-architecture.adoc Co-authored-by: mickogeary <[email protected]> * Update doc-Service-Telemetry-Framework/modules/con_stf-architecture.adoc Co-authored-by: mickogeary <[email protected]> * Update doc-Service-Telemetry-Framework/modules/con_stf-architecture.adoc Co-authored-by: mickogeary <[email protected]> * Update doc-Service-Telemetry-Framework/modules/con_stf-architecture.adoc Co-authored-by: mickogeary <[email protected]> * Update doc-Service-Telemetry-Framework/modules/con_stf-architecture.adoc * Update doc-Service-Telemetry-Framework/modules/con_stf-architecture.adoc Co-authored-by: mickogeary <[email protected]> * Update doc-Service-Telemetry-Framework/modules/con_stf-architecture.adoc Co-authored-by: mickogeary <[email protected]> --------- Co-authored-by: mickogeary <[email protected]> * Update install guide for dependent operators (#513) * Update install guide for dependent operators Update the installation guide for dependent operators. Adds installation instructions for Cluster Observability Operator and cert-manager for Red Hat OpenShift using the latest channels available for those Operators. The result is that deployment of observabilityStrategy: use_redhat is now possible as the default installation method. Related: STF-1636 * Update doc-Service-Telemetry-Framework/modules/proc_deploying-certificate-manager-for-openshift-operator.adoc Co-authored-by: Chris Sibbitt <[email protected]> * Add prerequisites to STF deployment * Adjust wording based on editorial feedback --------- Co-authored-by: Chris Sibbitt <[email protected]> * Clean up the prerequisites lists (#514) The prerequisite lists were slightly wrong and have been adjusted for correctness. Minor update of output in the same area to match latest version of STF. * Add removal instructions for COO (#516) * Add removal instructions for COO Add removal instructions for Cluster Observability Operator, pointing at the existing product documentation. Closes: STF-1643 * Update based on editor feedback * Refer to cert-manager removal documentation (#515) * Refer to cert-manager removal documentation Update the STF removal guide to refer to the cert-manager uninstallation procedure which is maintained by that team. Closes: STF-1642 * Adjust cert-manager removal after editor review * Pre-STF 1.5.3 Documentation Walkthrough and Cleanup (#517) * Documentation walk-through and clean up * Update architecture documentation, creating a new section describing the architecture changes in STF 1.5.3 * Update style for knowledge base article references based on editorial feedback * Add links to COO and cert-manager * Update cert-manager install to use oc wait * Multi-Cloud: Add warning about unique domains * HA: Move warning to top * Params: Add warning about HA deprecation * Obs Strat: Add link to migration KBA * Multi-Cloud: Remove reference to Ansible-based deployments * Dashboard: Fix links to collectd plugins Add wrappers to the collectd plugins in the Dashboard guide because paths changed between 16.2 and 17.1. * Update wording for CloudDomain overview Update the wording in the CloudDomain overview since router connections are controlled with router_id parameters now. * Modularize STF architecture changes (#518) * Update diagrams for Cluster Observability Operator (#519) * mg_master_517_minor-style-edits (#521) * mg_master_517_minor-style-edits * Update doc-Service-Telemetry-Framework/modules/con_primary-parameters-of-the-servicetelemetry-object.adoc --------- Co-authored-by: Leif Madsen <[email protected]> * Reference 17.1 in docinfo.xml (#522) * PrometheusRules must reference monitoring.rhobs (#523) The PrometheusRules and editing must all reference the new monitoring.rhobs CRD vs the old monitoring.coreos.com CRD which was provided by the community Prometheus Operator (and potentially conflicted with user-workload monitoring, and openshift-monitoring). All references to PrometheusRules now refer to the monitoring.rhobs CRD and any CLI commands are expanded for the full CRD path. --------- Signed-off-by: Leif Madsen <[email protected]> Co-authored-by: Chris Sibbitt <[email protected]> Co-authored-by: mickogeary <[email protected]> Co-authored-by: Victoria Martinez de la Cruz <[email protected]> Co-authored-by: Roger Heslop <[email protected]>
* Fix xrefs for director Operator (#481) Fix the xrefs for the director Operator. The xrefs were referring to the filename instead of the id+assembly value. * Initial pass for external ES (#483) * Initial pass for external ES * Updates for external ES * Notice about deprecated behaviour * Mention how the migration works (automatically) * Adjust comments about observabilityStrategy: none ** Events SGs will now deploy if events are enabled ** Adjusted relevant outputs * Apply suggestions from code review Co-authored-by: Leif Madsen <[email protected]> * Minor adjustments from review --------- Co-authored-by: Leif Madsen <[email protected]> * Trivial leftover suggestions (#485) * Trivial leftover suggestions * Link ES section to KB article (#486) * Link ES section to KB article * Update doc-Service-Telemetry-Framework/modules/con_primary-parameters-of-the-servicetelemetry-object.adoc --------- Co-authored-by: Leif Madsen <[email protected]> * Initial changes to installation for STF 1.5.3 (#484) * Initial changes to installation for STF 1.5.3 Make the initial changes to the installation documentation for STF 1.5.3, which uses observabilityStrategy: use_redhat by default along with preferring to install Observability Operator. Uses the community operators catalogsource for now until OBO is officially available from redhat-operators CatalogSource. Updates the Makefile as well to include Red Hat OpenStack Platform 17.1. Signed-off-by: Leif Madsen <[email protected]> * Update install guide for pre-installed Operators Update the installation guide layout for pre-installed Operators that cannot be managed with OLM (due to them being cluster-scoped Operators vs namespace-scoped Operators). Resolves: STF-1485 Signed-off-by: Leif Madsen <[email protected]> * Update doc-Service-Telemetry-Framework/modules/proc_deploying-stf-to-the-openshift-environment.adoc Co-authored-by: mickogeary <[email protected]> * Update doc-Service-Telemetry-Framework/modules/proc_deploying-stf-to-the-openshift-environment.adoc Co-authored-by: mickogeary <[email protected]> * Update doc-Service-Telemetry-Framework/modules/proc_deploying-stf-to-the-openshift-environment.adoc Co-authored-by: mickogeary <[email protected]> * Update doc-Service-Telemetry-Framework/modules/proc_deploying-stf-to-the-openshift-environment.adoc Co-authored-by: mickogeary <[email protected]> * Adjust wording for cert-manager installation module * Update doc-Service-Telemetry-Framework/modules/proc_deploying-stf-to-the-openshift-environment.adoc Co-authored-by: mickogeary <[email protected]> * Reword section that repeats itself --------- Signed-off-by: Leif Madsen <[email protected]> Co-authored-by: mickogeary <[email protected]> * use_redhat and migration link (#462) * use_redhat and migration link * Update doc-Service-Telemetry-Framework/modules/con_observability-strategy.adoc Co-authored-by: Leif Madsen <[email protected]> * Update doc-Service-Telemetry-Framework/modules/con_observability-strategy.adoc Co-authored-by: Leif Madsen <[email protected]> * Update doc-Service-Telemetry-Framework/modules/con_observability-strategy.adoc Co-authored-by: Leif Madsen <[email protected]> * Apply suggestions from code review Co-authored-by: Leif Madsen <[email protected]> * Minor typo fix * Visual tweak * Update doc-Service-Telemetry-Framework/modules/con_observability-strategy.adoc Co-authored-by: Leif Madsen <[email protected]> * Update doc-Service-Telemetry-Framework/modules/con_observability-strategy.adoc Co-authored-by: Leif Madsen <[email protected]> --------- Co-authored-by: Leif Madsen <[email protected]> * Override qdr::router_id defaults in stf-connectors (#487) Update the documentation to provide an override to the FQDN in the qdr::router_id configuration to avoid hostnames longer than 61 chars. Closes rhbz#2208020 * Don't enable event collection by default on OSP (#488) * Don't enable event collection by default on OSP Closes STF-1498 * Remove events configurations and use defaults The defaults for events pipeline and Ceilometer QDR publish events is disabled and does not need to be called out specifically. * No longer import the events dashboard (#490) With a refocus on telemetry by default and without event usage, remove the event dashboards as an event data store is optional and no longer included by default. Related STF-1498 * Installation of cluster monitoring is no longer necessary (#491) Installation of cluster monitoring in CRC (and elsewhere) is no longer necessary for installation of STF. Resolved by #465 * Adjust the default polling interval for collectd (#489) Adjust the collectd polling interval to be 30 seconds instead of 5 seconds. Related STF-1512 Co-authored-by: Victoria Martinez de la Cruz <[email protected]> * Remove logs configuration from sample CR (#493) Related STF-1504 * mg_master_RHOSPDOC-1380_chunk-installation-procedure (#492) * mg_master_RHOSPDOC-1380_chunk-installation-procedure * mg_master_RHOSPDOC-1380_chunk-installation-procedure 2nd commoit with further modularisation and chunkage * Commit 3: renaming proc_deploying-stf-to-the-openshift-environment.adoc to con_deploying-stf-to-the-openshift-environment.adoc * Reduce the number of Ceilometer pollsters (#497) Reduce the number of Ceilometer pollsters to only those used by the sample STF dashboards. Closes: rhbz#2239390 * Deprecate the use of high availability mode in STF (#494) * Deprecate the use of high availability mode in STF Resolves STF-1507 * Update doc-Service-Telemetry-Framework/modules/con_high-availability.adoc Co-authored-by: mickogeary <[email protected]> --------- Co-authored-by: mickogeary <[email protected]> * Fix up the table syntax in Observability Strategy (#495) The existing table was in markdown format which isn't compatible with asciidoc syntax. * Do not manage the event pipeline by default (#498) We do not want events to be sent to QDR by default, as the STF 1.5.3 default configuration will deploy telemetry only Related STF-1498 * Minor clean up and user experience updates (#496) Some minor clean up items and convert some commands to be a bit more user friendly and generic Resolves STF-1533 * Creating an alert does not use curl (#500) The Creating a standard alert route in Alertmanager section no longer uses curl to verify the configuration was loaded, since it uses the prometheus pod and the wget command instance. Removes an extra procedure step that is no longer applicable. * Eliminate duplicate line (#501) * Adding details for QDR password auth (#502) * Adding details for QDR password auth * Move note about disabling auth to main section * Update doc-Service-Telemetry-Framework/modules/proc_retrieving-the-qdr-password.adoc Co-authored-by: Leif Madsen <[email protected]> * Update doc-Service-Telemetry-Framework/modules/proc_retrieving-the-qdr-password.adoc Co-authored-by: mickogeary <[email protected]> --------- Co-authored-by: Leif Madsen <[email protected]> Co-authored-by: mickogeary <[email protected]> * Support OCP versions 4.12 through 4.14 (#503) * Support OCP versions 4.12 through 4.14 Update the stf-attributes to cover OCP 4.12 through 4.14 as our default, as OCP 4.10 is EOL. Update the Makefile for building to only cover RHOSP 17.1 and 16.2. * Need html-latest for upstream publish script * Summary: Replace incorrect stf-connectors.yaml filename with enable-stf.yaml (#504) Tracker: https://bugzilla.redhat.com/show_bug.cgi?id=2239871 Branch: master-BZ-2239871 * Clean up the STF install (#505) * Clean up the STF install for OCP 4.12 and later Clean up the STF installation documentation along with a command that will wait for the STO CSV to be ready and then automatically show the dependencies. Also hide contents that are no longer applicable when the supported base version of OCP is greater than 4.10, since OCP 4.10 is now EOL. * Adjust the ifeval to be < 4.12 * Provide the preferred STF object for deployment (#507) Provide the preferred ServiceTelemetry object for deployments rather than asking the administrator to build a configuration. The provided object will result in a metrics-focused deployment without extra configuration options, which will be a foundation for disconnected installations in the future. * Fix various RHOSP links and versions (#508) Fix various links to RHOSP documentation as the paths are different between RHOSP 16.2 and 17.1. Guides were updated but there is no auto-redirect, so we'll need to verify every link that uses defaultURL parameter. This covers the initial ones while working through documentation. Update some older version links and add a new parameter for 17.1 paths specifically. * Update and adjust dashboard procedures (#509) Update and adjust the dashboard installation procedures based on testing. * Add deprecation note for Grafana authentication (#510) Deprecate the basic auth login parameters for Grafana login. Preference is to use the Log in for OpenShift button going forward. Fix syntax issues in asciidoc. * Update deprecated Grafana login warning (#511) Update the Grafana login deprecation warning with wording from the documentation team. * Add updated architecture diagrams (#499) * Add updated architecture diagrams * Use updated architecture diagrams * Update architecture overview to focus on metrics Update the architecture overview to make it clear STF is focused on delivery of metrics from RHOSP. Provide information about use_redhat observability strategy, and note that prior versions of STF would manage Elasticsearch instances. Note that new installations use the observability strategy of use_redhat, and that the guide will focus on that deployment model. Provide a placeholder for a new xref that would guide the user towards the deprecated architecture using events, where our updated metrics-and-events architecture diagram would live. * Link to observability strategy * Remove community components from core overview * Use ObservabilityOperator parameter to refer to OBO/COO * Update doc-Service-Telemetry-Framework/modules/con_stf-architecture.adoc Co-authored-by: mickogeary <[email protected]> * Update doc-Service-Telemetry-Framework/modules/con_stf-architecture.adoc Co-authored-by: mickogeary <[email protected]> * Update doc-Service-Telemetry-Framework/modules/con_stf-architecture.adoc Co-authored-by: mickogeary <[email protected]> * Update doc-Service-Telemetry-Framework/modules/con_stf-architecture.adoc Co-authored-by: mickogeary <[email protected]> * Update doc-Service-Telemetry-Framework/modules/con_stf-architecture.adoc * Update doc-Service-Telemetry-Framework/modules/con_stf-architecture.adoc Co-authored-by: mickogeary <[email protected]> * Update doc-Service-Telemetry-Framework/modules/con_stf-architecture.adoc Co-authored-by: mickogeary <[email protected]> --------- Co-authored-by: mickogeary <[email protected]> * Update install guide for dependent operators (#513) * Update install guide for dependent operators Update the installation guide for dependent operators. Adds installation instructions for Cluster Observability Operator and cert-manager for Red Hat OpenShift using the latest channels available for those Operators. The result is that deployment of observabilityStrategy: use_redhat is now possible as the default installation method. Related: STF-1636 * Update doc-Service-Telemetry-Framework/modules/proc_deploying-certificate-manager-for-openshift-operator.adoc Co-authored-by: Chris Sibbitt <[email protected]> * Add prerequisites to STF deployment * Adjust wording based on editorial feedback --------- Co-authored-by: Chris Sibbitt <[email protected]> * Clean up the prerequisites lists (#514) The prerequisite lists were slightly wrong and have been adjusted for correctness. Minor update of output in the same area to match latest version of STF. * Add removal instructions for COO (#516) * Add removal instructions for COO Add removal instructions for Cluster Observability Operator, pointing at the existing product documentation. Closes: STF-1643 * Update based on editor feedback * Refer to cert-manager removal documentation (#515) * Refer to cert-manager removal documentation Update the STF removal guide to refer to the cert-manager uninstallation procedure which is maintained by that team. Closes: STF-1642 * Adjust cert-manager removal after editor review * Pre-STF 1.5.3 Documentation Walkthrough and Cleanup (#517) * Documentation walk-through and clean up * Update architecture documentation, creating a new section describing the architecture changes in STF 1.5.3 * Update style for knowledge base article references based on editorial feedback * Add links to COO and cert-manager * Update cert-manager install to use oc wait * Multi-Cloud: Add warning about unique domains * HA: Move warning to top * Params: Add warning about HA deprecation * Obs Strat: Add link to migration KBA * Multi-Cloud: Remove reference to Ansible-based deployments * Dashboard: Fix links to collectd plugins Add wrappers to the collectd plugins in the Dashboard guide because paths changed between 16.2 and 17.1. * Update wording for CloudDomain overview Update the wording in the CloudDomain overview since router connections are controlled with router_id parameters now. * Modularize STF architecture changes (#518) * Update diagrams for Cluster Observability Operator (#519) * mg_master_517_minor-style-edits (#521) * mg_master_517_minor-style-edits * Update doc-Service-Telemetry-Framework/modules/con_primary-parameters-of-the-servicetelemetry-object.adoc --------- Co-authored-by: Leif Madsen <[email protected]> * Reference 17.1 in docinfo.xml (#522) * PrometheusRules must reference monitoring.rhobs (#523) The PrometheusRules and editing must all reference the new monitoring.rhobs CRD vs the old monitoring.coreos.com CRD which was provided by the community Prometheus Operator (and potentially conflicted with user-workload monitoring, and openshift-monitoring). All references to PrometheusRules now refer to the monitoring.rhobs CRD and any CLI commands are expanded for the full CRD path. * Basic Auth in Grafana no longer supported (#525) * Adjust prometheus query to use token (#520) * Adjust prometheus query to use token * Add section for prometheus token handling * Correction for RBAC changes * Add link to OCP token secret docs * Specifics about UI perms * Update doc-Service-Telemetry-Framework/modules/proc_connecting-an-external-dashboard-system.adoc Co-authored-by: Leif Madsen <[email protected]> * Update doc-Service-Telemetry-Framework/modules/proc_connecting-an-external-dashboard-system.adoc Co-authored-by: Leif Madsen <[email protected]> * Update doc-Service-Telemetry-Framework/modules/proc_connecting-an-external-dashboard-system.adoc Co-authored-by: Leif Madsen <[email protected]> * Update doc-Service-Telemetry-Framework/modules/proc_connecting-an-external-dashboard-system.adoc Co-authored-by: Leif Madsen <[email protected]> * Update doc-Service-Telemetry-Framework/modules/proc_accessing-uis-for-stf-components.adoc Co-authored-by: mickogeary <[email protected]> * Update doc-Service-Telemetry-Framework/modules/proc_accessing-uis-for-stf-components.adoc Co-authored-by: mickogeary <[email protected]> --------- Co-authored-by: Leif Madsen <[email protected]> Co-authored-by: mickogeary <[email protected]> * Update installation to target Grafana Operator v5 (#526) Update the dashboarding installation procedures to target Grafana Operator v5 by default. Resolves: JIRA#STF-1680 * Add enable dashboard procedure (#527) * Add enable dashboard procedure Update the import dashboards procedure to be enable dashboards procedure now that STF has the ability to manage the dashboards which were formerly imported via URL. Also includes some minor procedure updates in related areas that were referenced in dashboard documentation. Resolves: JIRA#STF-1624 * Update doc-Service-Telemetry-Framework/modules/proc_importing-dashboards.adoc Co-authored-by: mickogeary <[email protected]> * Update doc-Service-Telemetry-Framework/modules/proc_importing-dashboards.adoc Co-authored-by: mickogeary <[email protected]> * Update doc-Service-Telemetry-Framework/modules/proc_importing-dashboards.adoc Co-authored-by: mickogeary <[email protected]> * Update doc-Service-Telemetry-Framework/modules/proc_importing-dashboards.adoc Co-authored-by: mickogeary <[email protected]> * Update doc-Service-Telemetry-Framework/modules/proc_importing-dashboards.adoc Co-authored-by: mickogeary <[email protected]> * Update doc-Service-Telemetry-Framework/modules/proc_importing-dashboards.adoc Co-authored-by: mickogeary <[email protected]> --------- Co-authored-by: mickogeary <[email protected]> * Update OCP version support status (#529) Update the version support status to specifically say that STF is supported on OCP EUS releases. While the STF bundles are generated for a range of releases, this is to support the ability of customers to upgrade OCP clusters between EUS releases without needing to remove STF first. Only minor testing is done against standard lifecycle releases of OCP (odd-numbered minor releases). * Update required resource permission reference (#528) Update the required resource permission reference to use the Grafana Operator v5 group. * Drop unused module found in other issue (#533) * mg-master_RHOSPDOC-1200_STF-disconnected (#531) * mg-master_RHOSPDOC-1200_STF-disconnected * added more info about mirror types and verificiation * 3rd commit * another commit from feedback. Added xref and removed openshiftshort as well as a few other changes * another push to fix broken xref * Update doc-Service-Telemetry-Framework/modules/proc_deploying-stf-on-openshift-disconnected-environments.adoc * fix mentions of OCP * edits based on SME feedback * more edits based on SME feedback * Minor syntax clean up * Update doc-Service-Telemetry-Framework/assemblies/assembly_preparing-your-ocp-environment-for-stf.adoc --------- Co-authored-by: Leif Madsen <[email protected]> --------- Signed-off-by: Leif Madsen <[email protected]> Co-authored-by: Leif Madsen <[email protected]> Co-authored-by: Chris Sibbitt <[email protected]> Co-authored-by: mickogeary <[email protected]> Co-authored-by: Victoria Martinez de la Cruz <[email protected]> Co-authored-by: Roger Heslop <[email protected]>
* minor doc updates from OSPRH-7722, OSP-32244, OSP-32175 * to receive extra information about virtual memory, you must enable vmem plugin in CollectdExtraPlugins
|
We can close this PR, is that right? Do we need to cherry pick fixes for OSPRH 7722 32244 32175? |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Stable 1.5 mg master osprh 7722 32244 32175 edits to stf
I don't understand this merge. There are many files different for reasons that I don't know.
This was meant to be a simple update of 4 adoc files in the STF Guide.
It's supposed to merge into stable-1.5, not master branch.
DO NOT MERGE