Update module github.com/docker/docker to v24 [SECURITY] - autoclosed #129

renovate · 2024-03-20T20:24:34Z

This PR contains the following updates:

Package	Change	Age	Adoption	Passing	Confidence
github.com/docker/docker	`v20.10.27+incompatible` -> `v24.0.9+incompatible`

GitHub Vulnerability Alerts

CVE-2024-24557

The classic builder cache system is prone to cache poisoning if the image is built FROM scratch.
Also, changes to some instructions (most important being HEALTHCHECK and ONBUILD) would not cause a cache miss.

An attacker with the knowledge of the Dockerfile someone is using could poison their cache by making them pull a specially crafted image that would be considered as a valid cache candidate for some build steps.

For example, an attacker could create an image that is considered as a valid cache candidate for:

FROM scratch
MAINTAINER Pawel

when in fact the malicious image used as a cache would be an image built from a different Dockerfile.

In the second case, the attacker could for example substitute a different HEALTCHECK command.

Impact

23.0+ users are only affected if they explicitly opted out of Buildkit (DOCKER_BUILDKIT=0 environment variable) or are using the /build API endpoint (which uses the classic builder by default).

All users on versions older than 23.0 could be impacted. An example could be a CI with a shared cache, or just a regular Docker user pulling a malicious image due to misspelling/typosquatting.

Image build API endpoint (/build) and ImageBuild function from github.com/docker/docker/client is also affected as it the uses classic builder by default.

Patches

Patches are included in Moby releases:

v25.0.2
v24.0.9
v23.0.10

Workarounds

Use --no-cache or use Buildkit if possible (DOCKER_BUILDKIT=1, it's default on 23.0+ assuming that the buildx plugin is installed).
Use Version = types.BuilderBuildKit or NoCache = true in ImageBuildOptions for ImageBuild call.

CVE-2024-29018

Moby is an open source container framework originally developed by Docker Inc. as Docker. It is a key component of Docker Engine, Docker Desktop, and other distributions of container tooling or runtimes. As a batteries-included container runtime, Moby comes with a built-in networking implementation that enables communication between containers, and between containers and external resources.

Moby's networking implementation allows for creating and using many networks, each with their own subnet and gateway. This feature is frequently referred to as custom networks, as each network can have a different driver, set of parameters, and thus behaviors. When creating a network, the --internal flag is used to designate a network as internal. The internal attribute in a docker-compose.yml file may also be used to mark a network internal, and other API clients may specify the internal parameter as well.

When containers with networking are created, they are assigned unique network interfaces and IP addresses (typically from a non-routable RFC 1918 subnet). The root network namespace (hereafter referred to as the 'host') serves as a router for non-internal networks, with a gateway IP that provides SNAT/DNAT to/from container IPs.

Containers on an internal network may communicate between each other, but are precluded from communicating with any networks the host has access to (LAN or WAN) as no default route is configured, and firewall rules are set up to drop all outgoing traffic. Communication with the gateway IP address (and thus appropriately configured host services) is possible, and the host may communicate with any container IP directly.

In addition to configuring the Linux kernel's various networking features to enable container networking, dockerd directly provides some services to container networks. Principal among these is serving as a resolver, enabling service discovery (looking up other containers on the network by name), and resolution of names from an upstream resolver.

When a DNS request for a name that does not correspond to a container is received, the request is forwarded to the configured upstream resolver (by default, the host's configured resolver). This request is made from the container network namespace: the level of access and routing of traffic is the same as if the request was made by the container itself.

As a consequence of this design, containers solely attached to internal network(s) will be unable to resolve names using the upstream resolver, as the container itself is unable to communicate with that nameserver. Only the names of containers also attached to the internal network are able to be resolved.

Many systems will run a local forwarding DNS resolver, typically present on a loopback address (127.0.0.0/8), such as systemd-resolved or dnsmasq. Common loopback address examples include 127.0.0.1 or 127.0.0.53. As the host and any containers have separate loopback devices, a consequence of the design described above is that containers are unable to resolve names from the host's configured resolver, as they cannot reach these addresses on the host loopback device.

To bridge this gap, and to allow containers to properly resolve names even when a local forwarding resolver is used on a loopback address, dockerd will detect this scenario and instead forward DNS requests from the host/root network namespace. The loopback resolver will then forward the requests to its configured upstream resolvers, as expected.

Impact

Because dockerd will forward DNS requests to the host loopback device, bypassing the container network namespace's normal routing semantics entirely, internal networks can unexpectedly forward DNS requests to an external nameserver.

By registering a domain for which they control the authoritative nameservers, an attacker could arrange for a compromised container to exfiltrate data by encoding it in DNS queries that will eventually be answered by their nameservers. For example, if the domain evil.example was registered, the authoritative nameserver(s) for that domain could (eventually and indirectly) receive a request for this-is-a-secret.evil.example.

Docker Desktop is not affected, as Docker Desktop always runs an internal resolver on a RFC 1918 address.

Patches

Moby releases 26.0.0-rc3, 25.0.5 (released) and 23.0.11 (to be released) are patched to prevent forwarding DNS requests from internal networks.

Workarounds

Run containers intended to be solely attached to internal networks with a custom upstream address (--dns argument to docker run, or API equivalent), which will force all upstream DNS queries to be resolved from the container network namespace.

Background

yair zak originally reported this issue to the Docker security team.
PR https://togithub.com/moby/moby/pull/46609 was opened in public to fix this issue, as it was not originally considered to have a security implication.
The official documentation claims that "the --internal flag that will completely isolate containers on a network from any communications external to that network," which necessitated this advisory and CVE.

CVE-2024-41110

A security vulnerability has been detected in certain versions of Docker Engine, which could allow an attacker to bypass authorization plugins (AuthZ) under specific circumstances. The base likelihood of this being exploited is low. This advisory outlines the issue, identifies the affected versions, and provides remediation steps for impacted users.

Impact

Using a specially-crafted API request, an Engine API client could make the daemon forward the request or response to an authorization plugin without the body. In certain circumstances, the authorization plugin may allow a request which it would have otherwise denied if the body had been forwarded to it.

A security issue was discovered In 2018, where an attacker could bypass AuthZ plugins using a specially crafted API request. This could lead to unauthorized actions, including privilege escalation. Although this issue was fixed in Docker Engine v18.09.1 in January 2019, the fix was not carried forward to later major versions, resulting in a regression. Anyone who depends on authorization plugins that introspect the request and/or response body to make access control decisions is potentially impacted.

Docker EE v19.03.x and all versions of Mirantis Container Runtime are not vulnerable.

Vulnerability details

AuthZ bypass and privilege escalation: An attacker could exploit a bypass using an API request with Content-Length set to 0, causing the Docker daemon to forward the request without the body to the AuthZ plugin, which might approve the request incorrectly.
Initial fix: The issue was fixed in Docker Engine v18.09.1 January 2019..
Regression: The fix was not included in Docker Engine v19.03 or newer versions. This was identified in April 2024 and patches were released for the affected versions on July 23, 2024. The issue was assigned CVE-2024-41110.

Patches

docker-ce v27.1.1 containes patches to fix the vulnerability.
Patches have also been merged into the master, 19.0, 20.0, 23.0, 24.0, 25.0, 26.0, and 26.1 release branches.

Remediation steps

If you are running an affected version, update to the most recent patched version.
Mitigation if unable to update immediately:
- Avoid using AuthZ plugins.
- Restrict access to the Docker API to trusted parties, following the principle of least privilege.

References

Release Notes

docker/docker (github.com/docker/docker)

Update module github.com/docker/docker to v24 [SECURITY] - autoclosed #129

Update module github.com/docker/docker to v24 [SECURITY] - autoclosed #129

Conversation

renovate bot commented Mar 20, 2024 • edited Loading

GitHub Vulnerability Alerts

Impact

Patches

Workarounds

Impact

Patches

Workarounds

Background

Impact

Vulnerability details

Patches

Remediation steps

References

Release Notes

Configuration

renovate bot commented Mar 20, 2024 •

edited

Loading