Amazon Dash button monitor inspired by edwardbenson and jgrahamc. Unlike other solutions, amadash is a self-contained package which does not require the user to modify any code to react to button presses. It includes all the functionality necessary to run as a daemon and is entirely driven by a simple config file.
For Debian/Ubuntu/Raspbian:
sudo apt-key adv --recv-keys --keyserver keyserver.ubuntu.com 2272781B
echo "deb http://debs.ridgebit.net/amadash/ custom main" | sudo tee /etc/apt/sources.list.d/amadash.list
sudo apt-get update
sudo apt-get install amadash
For all others:
git clone --recursive [email protected]:ipartola/amadash.git
cd amadash
virtualenv .env
. .env/bin/activate
pip install -r requirements.txt
python setup.py install
mkdir tmp
cp conf/example.conf tmp/amadash.conf
To run amadash in this setup: amadash -c tmp/amadash.conf
To set up your Amazon Dash button you will need to use an Android or iOS device with the Amazon app installed. The steps are as follows:
- Connect the button to your Wi-Fi. Ensure that the button is connected to the same network as the machine on which you intend to run amadash.
- Do not select a product to order in the final step. You may want to turn off push notifications to the Amazon app, otherwise it will annoy you every time you press the button.
- Grab the MAC address from the button; see next section.
In order to configure your Amazon Dash buttons you will need to detect their MAC addresses. You can use WireShark or tcpdump as described in the original blog post by edwardbenson. An easier way to do this is to run the amadash-discover tool:
sudo amadash-discover
Once amadash-discover is running, press the button which you are trying to discover. The MAC address will be printed
out.
NOTE: if you get an error like Could not initialize packet capture interface: not a broadcast link, try explicitly
specifying the network interface:
sudo amadash-discover -i eth1
Next, edit your /etc/amadash.conf and add the button's name, MAC address, and action you'd like it to perform. For example:
[button:0]
name = Button 0
mac = f0:27:00:00:00:01
action = /usr/bin/curl -s "https://example.com/?button=$BUTTON_NAME&mac=$BUTTON_MAC"
[button:1]
name = Button 1
mac = f0:27:00:00:00:02
action = echo "Button $BUTTON_NAME was pressed!" | mail -s 'New button press' [email protected]
After you are done editing the config file, restart amadash. On Debian/Ubuntu/Raspbian:
sudo /etc/init.d/amadash restart
To contribute to this project, simply fork it, modify the code, then create a pull request.
To set up local development:
git clone --recursive [email protected]:ipartola/amadash.git
cd amadash
virtualenv .env
. .env/bin/activate
pip install -r requirements.txt
python setup.py develop
mkdir tmp
cp conf/example.conf tmp/amadash.conf
amadash -c tmp/amadash.conf
Currently looking for someone to help out with:
- Creating an RPM package.
- Creating a homebrew package
- Creating a FreeBSD port