Dependency modernization (continued)

README.md

@@ -1,12 +1,12 @@
 # Imagemin Guard
 
-(This project has been based on [sum.cumo’s imagemin-merlin](https://github.com/sumcumo/imagemin-merlin). [Changes are documented](https://github.com/sumcumo/imagemin-merlin/compare/master...j9t:master), and include this README. Imagemin Guard supports two additional file formats—WebP and AVIF—, comes with improved code and documentation, and is being maintained—including automatically updated dependencies.)
+(This project was based on [sum.cumo’s imagemin-merlin](https://github.com/sumcumo/imagemin-merlin). [Changes are documented](https://github.com/sumcumo/imagemin-merlin/compare/master...j9t:master), and include this README. Imagemin Guard supports two additional file formats—WebP and AVIF—, comes with improved code and documentation, and is being maintained. For this reason, it’s not based on any imagemin packages anymore.)
 
-Imagemin Guard takes care of lossless compression of your images, to help you avoid bloat in your repositories. It’s an extension of [imagemin](https://www.npmjs.com/package/imagemin) and a fork of [imagemin-merlin (Merlin)](https://github.com/sumcumo/imagemin-merlin) that makes it convenient and safe to automatically compress JPG, PNG, GIF, WebP, and AVIF images.
+Imagemin Guard takes care of near-lossless compression of your images, to help you avoid bloat in your repositories. It makes it convenient and as safe as possible to automatically compress JPG, PNG, GIF, WebP, and AVIF images.
 
 It’s convenient because setup is simple. Install, run, add hook, done.
 
-It’s safe because compression happens _losslessly_. Therefore, no worries about forgetting to compress images, but no worries about sacrificing too much quality, either. (You can take care of additional optimizations by yourself or through other tooling.)
+It’s as safe as possible because compression happens losslessly (to be precise, near-lossless for PNG and GIF images). That allows you to stop worrying about forgetting to compress images, but also about sacrificing too much quality. (You can take care of additional optimizations by yourself or through other tooling.)
 
 ## Installation and Use
 
@@ -45,15 +45,15 @@ git commit -m "feat: add Husky pre-commit hook for Imagemin Guard"
 
 ### Parameters
 
-`--dry` allows to run Imagemin Guard in “dry mode.” All changed files can then be inspected under `/tmp/imagemin-guard`.
+`--dry` allows you to run Imagemin Guard in “dry mode.” All changes are shown in the terminal.
 
-`--ignore` allows to specify paths to be ignored (as in `--ignore=example,test`). Multiple paths have to be separated by comma. (Files and paths specified in .gitignore files are generally ignored.)
+`--ignore` allows you to specify paths to be ignored (as in `--ignore=example,test`). Multiple paths must be separated by commas. (Files and paths specified in .gitignore files are generally ignored.)
 
 `--staged` (recommended with automated use) triggers a mode that watches JPG, PNG, GIF, WebP, and AVIF files in `git diff` and only compresses those files—that approach makes Imagemin Guard more efficient in operation.
 
-## How Does the Output Look Like?
+## What Does the Output Look Like?
 
-Roughly like this (the screenshot shows an early version of Merlin):
+Roughly like this (the screenshot is still based on an early version of Merlin):
 
 ![Screenshot of Imagemin Guard’s predecessor, Merlin, in operation.](https://raw.githubusercontent.com/j9t/imagemin-guard/master/media/output.png)
 
@@ -63,19 +63,19 @@ Roughly like this (the screenshot shows an early version of Merlin):
 
 ## How Does Imagemin Guard Work?
 
-Imagemin Guard is a Node script that puts a wrapper around [imagemin-cli](https://www.npmjs.com/package/imagemin-cli) and the packages [imagemin-mozjpeg](https://www.npmjs.com/package/imagemin-mozjpeg), [imagemin-optipng](https://www.npmjs.com/package/imagemin-optipng), [imagemin-gifsicle](https://www.npmjs.com/package/imagemin-gifsicle), [imagemin-webp](https://www.npmjs.com/package/imagemin-webp), and [imagemin-avif](https://www.npmjs.com/package/imagemin-avif).
+Imagemin Guard is a Node script currently using [sharp](https://www.npmjs.com/package/sharp) and [gifsicle](https://www.npmjs.com/package/gifsicle) under the hood.
 
-Automated compression works by monitoring whether a given change list includes any JPGs, PNGs, GIFs, WebPs, or AVIFs. It’s initiated by a Git hook. Only those images are compressed where there is an improvement. The compressed images can then be committed to the underlying repository.
+Automated compression works by monitoring whether a given [change list](https://webglossary.info/terms/change-list/) includes any JPGs, PNGs, GIFs, WebPs, or AVIFs. It’s initiated by a Git hook. Only those images are compressed where there is an improvement. The compressed images can then be committed to the underlying repository.
 
-Through this approach, though still glossed over here, Imagemin Guard makes up for what’s missing or complicated in imagemin and related packages, namely easy, riskless, automated, resource-friendly in-repo optimization.
+Through this approach, though still glossed over here, Imagemin Guard makes up for what’s missing or complicated in other packages, namely easy, near-riskless, automated, resource-friendly in-repo optimization.
 
 ## Why Use Imagemin Guard?
 
 (This is a paraphrased remainder of earlier documentation, left in case it makes anything more clear ☺️)
 
 You _can_ use Imagemin Guard if you need a simple, automatable, robust solution to compress images and to keep the compressed results in your repository (instead of only in the production environment).
 
-That last piece is important, as Imagemin Guard compresses losslessly, so there’s no risk that images suffer from quality issues after processing. With this kind of defensive base compression, there’s no reason, and only advantages, to feed back compressed graphics into the respective source repository.
+That last piece is important, as Imagemin Guard compresses near-losslessly, so there’s little risk that images suffer from quality issues after processing. With this kind of defensive base compression, there’s no reason, and only advantages, to feed back compressed graphics into the respective source repository.
 
 ## What Does Imagemin Guard _Not_ Do?
 
@@ -85,11 +85,9 @@ The point is: Micro-optimization still needs to be taken care of through other m
 
 ## What’s Next?
 
-Following [Merlin](https://github.com/sumcumo/imagemin-merlin), which Imagemin Guard is based on, new features may include the option to configure the underlying imagemin plugins (somewhat prepared but not completed yet), or supporting projects in which the project’s .git folder is not at the same level as its package.json (at the moment, automatic mode doesn’t work in these cases).
+There are a few ideas, like supporting projects in which the project’s .git folder is not at the same level as its package.json (currently, automatic mode doesn’t work in these cases).
 
-Also, as some imagemin packages are not maintained at the moment, it may be useful or necessary to change to a different compression solution, like [Sqoosh](https://github.com/GoogleChromeLabs/squoosh). The situation is being monitored. Ideally, any change here will only happen under the hood.
-
-Thoughts or suggestions? Please [file an issue](https://github.com/j9t/imagemin-guard/issues/new) or send a pull request (some code still needs care). Thank you!
+Feedback is appreciated: Please [file an issue](https://github.com/j9t/imagemin-guard/issues/new) or send a pull request. Thank you!
 
 ## License
 

bin/imagemin-guard.test.js

@@ -6,7 +6,7 @@ const testFolder = path.join(__dirname, '../media/test')
 const testFolderGit = path.join(__dirname, '../media/test-git')
 const imageminGuardScript = path.join(__dirname, '../bin/imagemin-guard.js')
 // Crutch to avoid files like .DS_Store to sneak in
-// @@ Consolidate with package, to keep image definitions DRY
+// @@ Consolidate with package, to keep image definitions DRY (once there’s better Jest ESM support?)
 const allowedFileTypes = ['avif', 'gif', 'jpg', 'jpeg', 'png', 'webp']
 
 // Function to copy files
@@ -55,7 +55,7 @@ function areImagesAlreadyCompressed(dir) {
 
 describe('Imagemin Guard', () => {
   beforeAll(() => {
-    // Backup original images
+    // Back up original images
     copyFiles(testFolder, testFolderGit)
   })
 
@@ -74,7 +74,6 @@ describe('Imagemin Guard', () => {
     // Verify images are compressed
     const { allCompressed, uncompressedFiles } = areImagesCompressed(testFolderGit)
     if (uncompressedFiles.length > 0) {
-      // @@ Ensure all compressed files are listed
       console.log('The following files were not compressed:', uncompressedFiles.join(', '))
     }
     expect(allCompressed).toBe(true)
@@ -106,4 +105,22 @@ describe('Imagemin Guard', () => {
     }
     expect(allCompressed).toBe(true)
   })
+
+  test('Do not modify files in dry run', () => {
+    const originalStats = fs.readdirSync(testFolderGit).map(file => {
+      const filePath = path.join(testFolderGit, file)
+      return { file, stats: fs.statSync(filePath) }
+    })
+    execSync(`node ${imageminGuardScript} --dry`)
+    const newStats = fs.readdirSync(testFolderGit).map(file => {
+      const filePath = path.join(testFolderGit, file)
+      return { file, stats: fs.statSync(filePath) }
+    })
+    originalStats.forEach((original, index) => {
+      const newFile = newStats[index]
+      expect(newFile.file).toStrictEqual(original.file)
+      expect(newFile.stats.size).toStrictEqual(original.stats.size)
+      expect(newFile.stats.mtime).toStrictEqual(original.stats.mtime)
+    })
+  })
 })