MQTT Bridge for Wallbox

This open-source project connects your Wallbox fully locally to Home Assistant, providing you with unparalleled speed and reliability.

Note: Doesn't work with firmware v6.6.x see issue #63

Features

• Instant Sensor Data: The Wallbox's internal state is polled every second and any updates are immediately pushed to the external MQTT broker.

• Instant Control: Quickly lock/unlock, pause/resume or change the max charging current, without involving the manufacturer's servers.

• Always available: As long as your local network is up and your Wallbox has power, you're in control! No need to rely on a third party to communicate with the device you own.

• Home Assistant MQTT Auto Discovery: Enjoy a hassle-free setup with Home Assistant MQTT Auto Discovery support. The integration effortlessly integrates with your existing Home Assistant environment.

Getting Started

1. Root your Wallbox
2. Setup an MQTT Broker, if you don't already have one. Here's an example installing it as a Home Assistant add-on
3. ssh to your Wallbox and run

curl -sSfL https://github.com/jagheterfredrik/wallbox-mqtt-bridge/releases/download/bridge/install.sh > install.sh && bash install.sh

Note: To upgrade to new version, simply run the command from step 3 again.

Acknowledgments

A big shoutout to @tronikos for their valuable contributions. This project wouldn't be the same without the collaborative spirit of the open-source community.