The window_grid script provides tiling-like window-placement capabilities for any window-manager. It is ideal for mapping to particular key-strokes to resize / reposition windows on demand.
This script positions any X11 window based on a grid. The grid is subdivided, by default, into 8 segments in each direction. (This can be overridden using the -d flag.)
This script requires the following tools to be installed:
xprop wmctrl xdotool and xrandr.
Examples:
# make active window take up top-left quadrant
window_grid -w 4 -h 4 -x 0 -y 0
# place active window in bottom-right quadrant
window_grid -w 4 -h 4 -x 4 -y 4
# place active window on left-half of screen
window_grid -w 4 -h 8 -x 0 -y 0
# place active window at center of screen, with
# one grid-space of space between window and
# edge of screen
window_grid -w 6 -h 6 -x 1 -y 1
# Expand active window's width by one grid-space
window_grid -w +1
# Move window to second monitor at top-left
window_grid -s 1 -x 0 -y 0
# snap active window fit into the closest grid
# spaces based on its current size and position
window_grid -c both
Position and size are specified in grid-units and can be relative. for example, the options -x 1 -y 1 will place the top-left of the window 1 grid unit down, and 1 grid-unit right of the top-left of the screen. You can also use -x +1 or -x -1 to move the window one grid unit to the right or left respectively.
Height and width are specified the same way and can also be relative so if you specify -w +1, the window will be made one grid-unit larger than it currently is. The minimum size of a window is 1 grid-unit in each-direction. The maximum is the size of the entire screen.
This script works on the active window by default. You can operate on any window instead by providing its window-id using the -i flag.
Note that the actual pixel-size of a grid segment will depend on the your screen size. For example, for a 1920x1080 display, the default size of a 1x1 grid segment is 240 x 135.
window_grid is multi-display aware and divides each monitor according to the resolution of that monitor. It can place windows on multiple screens, and works as you would expect in most 'normal' multi-monitor setups.
By default, all positions and sizes are considered relative to the
monitor the window is currently on. You can switch the
destination monitor by using the -s flag. Screens start at 0
and are enumerated in the order they are returned by xrandr.