Home

Lawndon Lite Wiki

1X Lawn mower chasis
- I used a Ryobi 16in 18V mower that someone was throwing out! It had a brushed motor so I replaced it with the brushless one mentioned below.
4X 5010 Brushless Motor 360KV 2-6S
4X 30A Multi-directional ESCs
1X 18V Brushless Motor for lawn mowers
- I used a Ryobi 16in 18V P1109 motor from ebay.
1X 22.2V 6s LiPo batteriey
- Necessary amperage will depend on the mower motor used, I needed 5000mAh for my motor.
3X 8mm diameter hardened steel linear bearing rod, 400mm long ea
8X 4mm Steel Rods (gearbox axles)
- 4X 100mm
- 4X 90mm
24X 4mm*11mm*4mm Flanged Ball Bearings (Gear bearings)
16X 22mm*8mm*7mm skateboard bearings (Axle bearings)
503 Music Wire .055 X 36IN
- 100mm segments, segments per track depend on mower length
- 8 pieces of 36” wire total
8X M3X8mm Flat head screws
16X M3X18mm Flat head screws
16X M4X10mm Flat head screws
Various sizes of M3 standoffs
4X M4 Lock Nuts (optional for gear box axles)
4X M8 Lock Nuts (optional for axle wheels)
6-7kg PLA
16AWG and 20AWG wire

0.8mm Nozzle
2 line wall thickness for most things
5 line wall thickness for gears
0.35mm or 0.4mm layer height
60-75% infill for the stuff that needs to be strong like tracks, gears, and gear housing. 15-20% for everything else.