TimeAlarms for ESP arduino version 2.4.0 using newlibc time

The ESP8266TimeAlarm is no longer dependen on the Time library

Tasks scheduled at a particular time of day are called Alarms, tasks scheduled after an interval of time has elapsed are called Timers. These tasks can be created to continuously repeat or to occur once only.

Here is how you create an alarm to trigger a task repeatedly at a particular time of day: Alarm.alarmRepeat(8,30,0, MorningAlarm);
This would call the function MorningAlarm() at 8:30 am every day.

If you want the alarm to trigger only once you can use the alarmOnce method: Alarm.alarmOnce(8,30,0, MorningAlarm);
This calls a MorningAlarm() function in a sketch once only (when the time is next 8:30am)

Alarms can be specified to trigger a task repeatedly at a particular day of week and time of day: Alarm.alarmRepeat(dowMonday, 9,15,0, MondayMorningAlarm);
This would call the function WeeklyAlarm() at 9:15am every Monday.

If you want the alarm to trigger once only on a particular day and time you can do this: Alarm.alarmOnce(dowMonday, 9,15,0, MondayMorningAlarm);
This would call the function MondayMorning() Alarm on the next Monday at 9:15am.

Timers trigger tasks that occur after a specified interval of time has passed. The timer interval can be specified in seconds, or in hour, minutes and seconds. Alarm.timerRepeat(15, Repeats); // timer task every 15 seconds
This calls the Repeats() function in your sketch every 15 seconds.

If you want a timer to trigger once only, you can use the timerOnce method: Alarm.timerOnce(10, OnceOnly); // called once after 10 seconds This calls the onceOnly() function in a sketch 10 seconds after the timer is created.

If you want to trigger once at a specified date and time you can use the trigger Once() method: Alarm. triggerOnce(time_t value, explicitAlarm); // value specifies a date and time (See the makeTime() method in the Time library to convert dates and times into time_t)

Your sketch should call the Alarm.delay() function instead of the Arduino delay() function when using the Alarms library. The timeliness of triggers depends on sketch delays using this function. Alarm.delay( period); // Similar to Arduino delay - pauses the program for the period (in milliseconds).

Functional reference:

// functions to create alarms and timers

Alarm.triggerOnce(value, AlarmFunction); Description: Call user provided AlarmFunction once at the date and time of the given value See the Ttime library for more on time_t values

Alarm.alarmRepeat(Hour, Minute, Second, AlarmFunction); Description: Calls user provided AlarmFunction every day at the given Hour, Minute and Second.

Alarm.alarmRepeat(value, AlarmFunction); Description: Calls user provided AlarmFunction every day at the time indicated by the given value

Alarm.alarmRepeat(DayOfWeek, Hour, Minute, Second, AlarmFunction); Description: Calls user provided AlarmFunction every week on the given DayOfWeek, Hour, Minute and Second.

Alarm.alarmOnce(Hour, Minute, Second, AlarmFunction); Description: Calls user provided AlarmFunction once when the Arduino time next reaches the given Hour, Minute and Second.

Alarm.alarmOnce(value, AlarmFunction); Description: Calls user provided AlarmFunction once at the next time indicated by the given value

Alarm.alarmOnce(DayOfWeek, Hour, Minute, Second, AlarmFunction); Description: Calls user provided AlarmFunction once only on the next DayOfWeek, Hour, Minute and Second.

Alarm.timerRepeat(Period, TimerFunction); Description: Continuously calls user provided TimerFunction after the given period in seconds has elapsed.

Alarm.timerRepeat(Hour, Minute, Second, TimerFunction); Description: As timerRepeat above, but period is the number of seconds in the given Hour, Minute and Second parameters

Alarm.timerOnce(Period, TimerFunction); Description: Calls user provided TimerFunction once only after the given period in seconds has elapsed.

Alarm.timerOnce(Hour, Minute, Second, TimerFunction); Description: As timerOnce above, but period is the number of seconds in the given Hour, Minute and Second parameters

Alarm.delay( period) Description: Similar to Arduino delay - pauses the program for the period (in miliseconds) specified. Call this function rather than the Arduino delay function when using the Alarms library. The timeliness of the triggers depends on sketch delays using this function.

Low level functions not usually required for typical applications: disable( ID); - prevent the alarm associated with the given ID from triggering
enable(ID); - enable the alarm write(ID, value); - write the value (and enable) the alarm for the given ID
read(ID); - return the value for the given ID
readType(ID); - return the alarm type for the given alarm ID getTriggeredAlarmId(); - returns the currently triggered alarm id, only valid in an alarm callback

FAQ

Q: What hardware and software is needed to use this library? A: This library requires the Time library. No internal or external hardware is used by the Alarm library.

Q: Why must I use Alarm.delay() instead of delay()? A: Task scheduling is handled in the Alarm.delay function. Tasks are monitored and triggered from within the Alarm.delay call so Alarm.delay should be called whenever a delay is required in your sketch. If your sketch waits on an external event (for example, a sensor change), make sure you repeatedly call Alarm.delay while checking the sensor. You can call Alarm.delay(0) if you need to service the scheduler without a delay.

Q: Are there any restrictions on the code in a task handler function? A: No. The scheduler does not use interrupts so your task handling function is no different from other functions you create in your sketch.

Q: What are the shortest and longest intervals that can be scheduled? A: Time intervals can range from 1 second to years. (If you need timer intervals shorter than 1 second then the TimedAction library by Alexander Brevig may be more suitable, see: http://www.arduino.cc/playground/Code/TimedAction)

Q: How are scheduled tasks affected if the system time is changed? A: Tasks are scheduled for specific times designated by the system clock. If the system time is reset to a later time (for example one hour ahead) then all alarms and timers will occur one hour later. If the system time is set backwards (for example one hour back) then the alarms and timers will occur an hour earlier. If the time is reset before the time a task was scheduled, then the task will be triggered on the next service (the next call to Alarm.delay). This is the expected behaviour for Alarms � tasks scheduled for a specific time of day will trigger at that time, but the affect on timers may not be intuitive. If a timer is scheduled to trigger in 5 minutes time and the clock is set ahead by one hour, that timer will not trigger until one hour and 5 minutes has elapsed.

Q: What is the valid range of times supported by these libraries? A: The time library is intended to handle times from Jan 1 1970 through Jan 19 2038. The Alarms library expects dates to be on or after Jan1 1971 so clocks should no be set earlier than this if using Alarms. (The functions to create alarms will return an error if an earlier date is given).

Q: How many alarms can be created? A: Up to six alarms can be scheduled.
The number of alarms can be changed in the TimeAlarms header file (set by the constant dtNBR_ALARMS, note that the RAM used equals dtNBR_ALARMS * 40)

onceOnly Alarms and Timers are freed when they are triggered so another onceOnly alarm can be set to trigger again. There is no limit to the number of times a onceOnly alarm can be reset.

The following fragment gives one example of how a timerOnce task can be rescheduled: Alarm.timerOnce(random(10), randomTimer); // trigger after random number of seconds

void randomTimer(){ int period = random(2,10); // get a new random period Alarm.timerOnce(period, randomTimer); // trigger for another random period }