Kafka Lag Exporter

Monitor Kafka Consumer Group Latency with Kafka Lag Exporter

Introduction
Metrics
- Labels
Run on Kubernetes
Run Standalone
Estimate Consumer Group Time Lag
Strimzi Kafka Cluster Watcher
Monitoring with Grafana
Filtering Metrics without Prometheus Server
Development
Release
- Pre-requisites
- Release steps
Change log

Introduction

Kafka Lag Exporter makes it easy to view the latency (residence time) of your Apache Kafka consumer groups. It can run anywhere, but it provides features to run easily on Kubernetes clusters against Strimzi Kafka clusters using the Prometheus and Grafana monitoring stack. Kafka Lag Exporter is an Akka Typed application written in Scala.

For more information about Kafka Lag Exporter's features see Lightbend's blog post: Monitor Kafka Consumer Group Latency with Kafka Lag Exporter.

Project Status: beta

Author: Sean Glover (@seg1o)

Metrics

Prometheus is a standard way to represent metrics in a modern cross-platform manner. Kafka Lag Exporter exposes several metrics as an HTTP endpoint that can be readily scraped by Prometheus. When installed using Helm and when enabling the Kubernetes pod self-discovery features within Prometheus server, Prometheus server will automatically detect the HTTP endpoint and scrape its data.

kafka_consumergroup_group_offset

Labels: cluster_name, group, topic, partition, member_host, consumer_id, client_id

The offset of the last consumed offset for this partition in this topic partition for this group.

kafka_consumergroup_group_lag

Labels: cluster_name, group, topic, partition, member_host, consumer_id, client_id

The difference between the last produced offset and the last consumed offset for this partition in this topic partition for this group.

kafka_consumergroup_group_lag_seconds

Labels: cluster_name, group, topic, partition, member_host, consumer_id, client_id

The estimated lag in seconds. This metric correlates with lag in offsets. For more information on how this is calculated read the Estimate consumer group lag in time section below.

kafka_consumergroup_group_max_lag

Labels: cluster_name, group, is_simple_consumer

The highest (maximum) lag in offsets for a given consumer group.

kafka_consumergroup_group_max_lag_seconds

Labels: cluster_name, group, is_simple_consumer

The highest (maximum) lag in time for a given consumer group.

kafka_consumergroup_group_sum_lag

Labels: cluster_name, group

The sum of the difference between the last produced offset and the last consumed offset of all partitions for this group.

kafka_consumergroup_group_topic_sum_lag

Labels: cluster_name, group, topic

The sum of the difference between the last produced offset and the last consumed offset of all partitions in this topic for this group.

kafka_partition_latest_offset

Labels: cluster_name, topic, partition

The latest offset available for topic partition. Kafka Lag Exporter will calculate a set of partitions for all consumer groups available and then poll for the last produced offset. The last produced offset is used in the calculation of other metrics provided, so it is exported for informational purposes. For example, the accompanying Grafana dashboard makes use of it to visualize the last produced offset and the last consumed offset in certain panels.

kafka_partition_earliest_offset

Labels: cluster_name, topic, partition

The earliest offset available for topic partition. Kafka Lag Exporter will calculate a set of partitions for all consumer groups available and then poll for the earliest available offset. The earliest available offset is used in the calculation of other metrics provided, so it is exported for informational purposes. For example, the accompanying Grafana dashboard makes use of it to visualize the offset-based volume of a partition in certain panels.

kafka_consumergroup_poll_time_ms

Labels: cluster_name

The time taken to poll (milli seconds) all the information from all consumer groups for every cluster.

Labels

Each metric may include the following labels when reported. If you define the labels property for configuration of a cluster then those labels will also be included. The superset of all labels defined for all cluster configurations are used for each metric. This is due to a restriction in the Java Prometheus client library that only allows us to define one set of labels per metric. Therefore, if the label names across cluster configurations are not consistent then the missing labels for each cluster will appear as blank values ("") in the reported metric. An alternative to defining labels in Kafka Lag Exporter is to define relabeling rules in your Prometheus server configuration.

cluster_name - Either the statically defined Kafka cluster name, or the metadata.name of the Strimzi Kafka cluster that was discovered with the Strimzi auto discovery feature.
topic - The Kafka topic.
partition - The Kafka partition.
group - The Kafka consumer group.id.

The rest of the labels are passed along from the consumer group metadata requests.

member_host - The hostname or IP of the machine or container running the consumer group member that is assigned this partition.
client_id - The id of the consumer group member. This is usually generated automatically by the group coordinator.
consumer_id - The globally unique id of the consumer group member. This is usually a combination of the client_id and a GUID generated by the group coordinator.

Prometheus server may add additional labels based on your configuration. For example, Kubernetes pod information about the Kafka Lag Exporter pod where the metrics were scraped from.

Run on Kubernetes

Configuration

Details for configuration for the Helm Chart can be found in the values.yaml file of the accompanying Helm Chart.

Install with Helm

You can install the chart from the local filesystem.

helm install https://github.com/lightbend/kafka-lag-exporter/releases/download/v0.6.2/kafka-lag-exporter-0.6.2.tgz

Examples

Install with the Strimzi Kafka discovery feature. See Strimzi Kafka Cluster Watcher for more details.

helm install https://github.com/lightbend/kafka-lag-exporter/releases/download/v0.6.2/kafka-lag-exporter-0.6.2.tgz \
  --name kafka-lag-exporter \
  --namespace kafka-lag-exporter \
  --set watchers.strimzi=true

Install with statically defined cluster at the CLI.

helm install https://github.com/lightbend/kafka-lag-exporter/releases/download/v0.6.2/kafka-lag-exporter-0.6.2.tgz \
  --name kafka-lag-exporter \
  --namespace myproject \
  --set clusters\[0\].name=my-cluster \
  --set clusters\[0\].bootstrapBrokers=my-cluster-kafka-bootstrap:9092

Install with statically defined cluster at the CLI, but with a non-default service account assigned to the deployment.

helm install https://github.com/lightbend/kafka-lag-exporter/releases/download/v0.6.2/kafka-lag-exporter-0.6.2.tgz \
  --name kafka-lag-exporter \
  --namespace myproject \
  --set clusters\[0\].name=my-cluster \
  --set clusters\[0\].bootstrapBrokers=my-cluster-kafka-bootstrap:9092
  --set serviceAccount.create=true

Run a debug install (DEBUG logging, debug helm chart install, force docker pull policy to Always).

helm install https://github.com/lightbend/kafka-lag-exporter/releases/download/v0.6.2/kafka-lag-exporter-0.6.2.tgz \
  --name kafka-lag-exporter \
  --namespace myproject \
  --set image.pullPolicy=Always \
  --set logLevel=DEBUG \
  --set clusters\[0\].name=my-cluster \
  --set clusters\[0\].bootstrapBrokers=my-cluster-kafka-bootstrap.myproject:9092 \
  --debug

View the health endpoint

To view the Prometheus health endpoint from outside your Kubernetes cluster, use kubectl port-forward.

Ex)

kubectl port-forward service/kafka-lag-exporter-service 8080:8000 --namespace myproject

View exporter logs

To view the logs of the exporter, identify the pod name of the exporter and use the kubectl logs command.

Ex)

kubectl logs {POD_ID} --namespace myproject -f

Run Standalone

To run the project in standalone mode you must first define a configuration application.conf. This configuration must contain at least connection info to your Kafka cluster (kafka-lag-exporter.clusters). All other configuration has defaults defined in the project itself. See reference.conf for defaults.

Reporters

It is possible to report (either or both):

to graphite via the config kafka-lag-exporter.reporters.graphite
as prometheus via the config kafka-lag-exporter.reporters.prometheus

See section below for more information.

Configuration

General Configuration (kafka-lag-exporter{})

Key	Default	Description
`reporters.prometheus.port`	`8000`	The port to run the Prometheus endpoint on
`reporters.graphite.host`	None	The graphite host to send metrics to (if not set, will not output to graphite)
`reporters.graphite.port`	None	The graphite port to send metrics to (if not set, will not output to graphite)
`reporters.graphite.prefix`	None	The graphite metric prefix (if not set, prefix will be empty)
`poll-interval`	`30 seconds`	How often to poll Kafka for latest and group offsets
`lookup-table-size`	`60`	The maximum window size of the look up table per partition
`client-group-id`	`kafkalagexporter`	Consumer group id of kafka-lag-exporter's client connections
`kafka-client-timeout`	`10 seconds`	Connection timeout when making API calls to Kafka
`clusters`	`[]`	A statically defined list of Kafka connection details. This list is optional if you choose to use the Strimzi auto-discovery feature
`watchers`	`{}`	Settings for Kafka cluster "watchers" used for auto-discovery.
`metric-whitelist`	`[".*"]`	Regex of metrics to be exposed via Prometheus endpoint. Eg. `["._max_lag.", "kafka_partition_latest_offset"]`

Kafka Cluster Connection Details (kafka-lag-exporter.clusters[])

Key	Default	Required	Description
`name`	`""`	Yes	A unique cluster name to for this Kafka connection detail object
`bootstrap-brokers`	`""`	Yes	Kafka bootstrap brokers. Comma delimited list of broker hostnames
`group-whitelist`	`[".*"]`	No	A list of Regex of consumer groups monitored. For example, if you only wish to expose only certain groups with `input` and `output` prefixes, use `["^input-.+", "^output-.+"]`.
`topic-whitelist`	`[".*"]`	No	A list of Regex of topics monitored. For example, if you only wish to expose only certain topics, use either `["^topic.+"]` or `["topic1", "topic2"]`.
`topic-blacklist`	`[]`	No	A list of Regex of topics not monitored. For example, if you wish not expose certain topics , use either `["^unmonitored-topic.+"]` or `["unmonitored-topic1", "unmonitored-topic2"]`.
`consumer-properties`	`{}`	No	A map of key value pairs used to configure the `KafkaConsumer`. See the Consumer Config section of the Kafka documentation for options.
`admin-client-properties`	`{}`	No	A map of key value pairs used to configure the `AdminClient`. See the Admin Config section of the Kafka documentation for options.
`labels`	`{}`	No	A map of key value pairs will be set as additional custom labels per cluster for all the metrics in prometheus.

Watchers (kafka-lag-exporters.watchers{})

Key	Default	Description
`strimzi`	`false`	Toggle for using Strimzi auto-discovery.

Ex) Expose metrics on port 9999, double the default lookup table size, and define client.id's for the KafkaConsumer and AdminClient used by the project.

kafka-lag-exporter {
  reporters {
    prometheus {
      port = 9999
    }
  }
  lookup-table-size = 120
  clusters = [
    {
      name = "a-cluster"
      bootstrap-brokers = "a-1.cluster-a.xyzcorp.com:9092,a-2.cluster-a.xyzcorp.com:9092,a-3.cluster-a.xyzcorp.com:9092"
      topic-whitelist = [
        "widgets-.+"
      ]
      consumer-properties = {
        client.id = "consumer-client-id"
      }
      admin-client-properties = {
        client.id = "admin-client-id"
      }
      labels = {
        location = "ny"
        zone = "us-east"
      }
    }
  ]
}

Running Docker Image

Define an application.conf and optionally a logback.xml with your configuration.

Run the Docker image. Expose metrics endpoint on the host port 8000. Mount a config dir with your application.conf logback.xml into the container.

Ex)

docker run -p 8000:8000 \
    -v $(pwd):/opt/docker/conf/ \
    lightbend/kafka-lag-exporter:0.6.2 \
    /opt/docker/bin/kafka-lag-exporter \
    -Dconfig.file=/opt/docker/conf/application.conf \
    -Dlogback.configurationFile=/opt/docker/conf/logback.xml

See full example in ./examples/standalone.

Estimate Consumer Group Time Lag

One of Kafka Lag Exporter’s more unique features is its ability to estimate the length of time that a consumer group is behind the last produced value for a particular partition, time lag (wait time). Offset lag is useful to indicate that the consumer group is lagging, but it doesn’t provide a sense of the actual latency of the consuming application.

For example, a topic with two consumer groups may have different lag characteristics. Application A is a consumer which performs CPU intensive (and slow) business logic on each message it receives. It’s distributed across many consumer group members to handle the high load, but since its processing throughput is slower it takes longer to process each message per partition. Meanwhile Application B is a consumer which performs a simple ETL operation to land streaming data in another system, such as an HDFS data lake. It may have similar offset lag to Application A, but because it has a higher processing throughput its lag in time may be significantly less.

It’s easier to build monitoring alerts using a time lag measurement than an offset lag measurement, because latency is best described in requirements as a unit of time.

There are several ways to calculate time lag. The easiest way would be to parse the message timestamp and subtract it from the current time. However, this requires us to actually poll for messages in each partition that we wish to calculate time lag for. We must download the message payload and parse this information out of a ConsumerRecord. This is an expensive operation to perform and will likely not scale well in the general use case where messages can be of any size (though less than 1MB, unless default broker config is changed) and the number of partitions for any given topic could range into to thousands. However, it would be an interesting feature to explore in the future. It would also be possible to instrument the Kafka consuming application itself to report this metric since it can readily sample messages it's already consuming for their timestamp property and perform the calculation, but this requires each Kafka consuming application to opt into this implementation in order for it to be monitored. Another way to determine time lag is to estimate it based on consumer group lag information we already have available.

Kafka Lag Exporter estimates time lag by either interpolation or extrapolation of the timestamp of when the last consumed offset was first produced. We begin by retrieving the source data from Kafka. We poll the last produced offset for all partitions in all consumer groups and store the offset (x) and current time (y) as a coordinate in a table (the interpolation table) for each partition. This information is retrieved as a metadata call using the KafkaConsumer endOffsets call and does not require us to actually poll for messages. The Kafka Consumer Group coordinator will return the last produced offsets for all the partitions we are subscribed to (the set of all partitions of all consumer groups). Similarly, we use the Kafka AdminClient’s listConsumerGroupOffsets API to poll for consumer group metadata from all consumer groups to get the last consumed offset for each partition in a consumer group.

Once we’ve built up an interpolation table of at least two values we can begin estimating time lag by performing the following operations (some edge cases are omitted for clarity) for each last consumed offset of each partition.

Lookup interpolation table for a consumer group partition
Find two points within the table that contain the last consumed offset
If there are no two points that contain the last consumed offset then use the first and last points as input to the interpolation formula. This is the extrapolation use case.
Interpolate inside (or extrapolate outside) the two points from the table we picked to predict a timestamp for when the last consumed message was first produced.
Take the difference of the time of the last consumed offset (~ the current time) and the predicted timestamp to find the time lag.

Below you will find a diagram that demonstrates the interpolation use case.

The extrapolation use case uses different points in the interpolation table (the first and last points), but the calculation is the same.

Interpolation is always desirable because we can be more assured that the prediction will be more accurate because we’re plotting a point within two points of our existing dataset. Extrapolation will always be less accurate because we’re predicting points that may be a fair distance away from our dataset.

Strimzi Kafka Cluster Watcher

When you install the chart with --set watchers.strimzi=true then the exporter will create a new ClusterRole and ClusterRoleBinding to allow for the automatic discovery of Strimzi Kafka clusters. The exporter will watch for Kafka resources to be created or destroyed. If the cluster already exists, or was created while the exporter was online then it will automatically begin to collect consumer group metadata and export it. If a Kafka resource is destroyed then it will stop collecting consumer group metadata for that cluster.

The exporter will name the cluster the same as Kafka resources metadata.name field.

Monitoring with Grafana

A sample Grafana dashboard is provided in ./grafana/. It can be imported into a Grafana server that is configured with a Prometheus datasource that is reading the Kafka Lag Exporter's Prometheus health endpoint.

The dashboard contains several high level user-configurable variables.

Namespace - The namespace of the Kafka Lag Exporter. Only 1 namespace can be selected at a time.
Cluster Name - The name of the Kafka cluster. Only 1 cluster name can be selected at a time.
Consumer Group - The name of the Consumer Group. This is a multi-select list which allows you to view the dashboard for 1 to All consumer groups.

This dashboard has 4 rows that are described below.

All Consumer Group Lag - A high level set of 4 panels.

Consumer Group Max Time Lag
Consumer Group Time Lag Top Partitions
Consumer Group Max Offset Lag
Consumer Group Offset Lag Top Partitions

Max Consumer Group Time Lag Over Offset Lag - One panel for each consumer group that shows the max lag in time on the left Y axis and max lag in offsets on the right Y axis. Ex)
Max Consumer Group Time Lag Over Summed Offsets - One panel for each consumer group that shows the max lag in time on the left Y axis. The right Y axis has the sum of latest and last consumed offsets for all group partitions. Ex)
Kafka Lag Exporter JVM Metrics - JVM metrics for the Kafka Lag Exporter itself.

Filtering Metrics without Prometheus Server

It's possible to filter specific metric names using HTTP query parameters to the metrics health endpoint.

To filter 1 or more metrics use the query parameter pattern of name[]=prometheus_metric_name.

Ex)

$ curl -X GET -g http://localhost:8080?name[]=kafka_consumergroup_group_max_lag
# HELP kafka_consumergroup_group_max_lag Max group offset lag
# TYPE kafka_consumergroup_group_max_lag gauge
kafka_consumergroup_group_max_lag{cluster_name="pipelines-strimzi",group="variable-throughput-runtime.f3-merge.in01",} 52.0
...

This is an undocumented feature of the Prometheus HTTP server. For reference consult the parseQuery method for the HTTP server in the prometheus/client_java GitHub repository.

Health Check

kafka_consumergroup_poll_time_ms metric exposes the time taken the poll all the consumer group information for every cluster. This can be used as health check endpoint and optionally fail the health check if it's greater than some value (longer than the poll interval) Ex: $ curl -X GET -g http://localhost:8000/metrics?name[]=kafka_consumergroup_poll_time_ms

Development

Tests

Kafka Lag Exporter has unit and integration tests. The integration tests use Alpakka Kafka Testkit to provide an embedded Kafka instance and simulate consumer group lag.

Run all tests with SBT.

sbt test

Testing with local `docker-compose.yaml`

A Docker Compose cluster with producers and multiple consumer groups is defined in ./docker/docker-compose.yaml. This is useful to manually test the project locally, without K8s infrastructure. These images are based on the popular wurstmeister Apache Kafka Docker images. Confirm you match up the version of these images with the correct version of Kafka you wish to test.

To configure cluster connection info either create an application.conf or pass environment variables.

KAFKA_LAG_EXPORTER_CLUSTERS.0.name=default
KAFKA_LAG_EXPORTER_CLUSTERS.0.bootstrap-brokers=localhost:9094

Remove any previous volume state.

docker-compose rm -f

Start up the cluster in the foreground.

docker-compose up

Building your own Helm Chart

If you want to build your own Helm Chart and accompanying docker images you can override the Docker repository and username with environment variables.

DOCKER_REPOSITORY - A custom Docker repository, such as a private company's docker repository (defaults to DockerHub) DOCKER_USERNAME - A custom Docker username (defaults to lightbend)

Run the updateHelmChart sbt task to update the Helm Chart with the appropriate Docker repository and username.

Run the docker:publishLocal sbt task to publish a local Docker image.

Run the docker:publish sbt task to publish the Docker image to the specified Docker repository.

For example, to update the Helm Chart to use a custom docker registry and username and to publish the chart locally.

$ export DOCKER_REPOSITORY="docker.xyzcorp.com"
$ export DOCKER_USERNAME="foobar"
$ sbt updateHelmChart docker:publishLocal
[info] Loading settings for project global-plugins from idea.sbt ...
[info] Loading global plugins from /home/seglo/.sbt/1.0/plugins
[info] Loading settings for project kafka-lag-exporter-build from plugins.sbt ...
[info] Loading project definition from /home/seglo/source/kafka-lag-exporter/project
[info] Loading settings for project kafka-lag-exporter from version.sbt,build.sbt ...
[info] Set current project to kafka-lag-exporter (in build file:/home/seglo/source/kafka-lag-exporter/)
Update Chart.yaml appVersion to 0.4.0-SNAPSHOT and version to 0.4.0
Update values.yaml docker image tag to 0.4.0-SNAPSHOT
Update values.yaml docker repository to docker.xyzcorp.com/foobar/kafka-lag-exporter
...
[info] Successfully built f392402958b7
[info] Successfully tagged docker.xyzcorp.com/foobar/kafka-lag-exporter:0.4.0-SNAPSHOT
[info] Built image docker.xyzcorp.com/foobar/kafka-lag-exporter with tags [0.4.0-SNAPSHOT]
[success] Total time: 17 s, completed 1-May-2019 2:37:28 PM

Deploy the local chart to K8s:

helm install ./charts/kafka-lag-exporter \
  --name kafka-lag-exporter \
  --namespace kafka-lag-exporter \
  --set watchers.strimzi=true \
  --set kafkaLagExporterLogLevel=DEBUG \
  --set image.pullPolicy=Always

Release

Pre-requisites

The release process is orchestrated by the sbt-release. Privileged access is required. Before running a release make sure the following pre-req's are met.

Authenticated with Docker Hub with the docker command.
Authenticated with GitHub
~/.netrc file setup with GitHub credentials/token

Release steps

Update the Change log
Run doctoc on README.md
Run sbt release. To see what steps are performed during release consult the build.sbt.
Review the GitHub release draft and submit it.

Change log

0.6.2

Support init containers in helm chart #135 (@terjesannum)
Support consumer groups for which member information is unavailable #128 (@lilyevsky)

0.6.1

Update to Apache Kafka 2.5.0. Resolves issue of "Invalid negative offset" for uninitizalized consumer groups #120
Graphite support #105 (@yazgoo)

0.6.0

Add Metadata poll timer metric kafka_consumergroup_poll_time_ms #105 (@anbarasantr)
Bugfix: Bypass prediction when consumer group is caught up. Reported in #111 (@rkrage).
Publish Java App Packaging for non-Docker envs #119

0.5.5

Add kafka topic blacklist #90 (@drrzmr)
Add metric to represent a consumer group's total offset lag per topic #93 (@dylanmei)
Support specifying image digest and container securityContext #95 (@terjesannum)
Allow mounting extra configmaps in pod #94 (@terjesannum)
Bugfix: Fixed pod annotations support in helm chart #91 (@terjesannum)
Bugfix: Global label values #82 (@anbarasantr)
Prometheus Operator Service Operator support #85 (@abhishekjiitr)
Added kafka_partition_earliest_offset metric for determining the volume of offsets stored in Kafka. #86 (@graphex)

0.5.4

Bugfix: Accidentally released with local repo.

0.5.3

Bugfix: Fix Helm Chart: Whitespace in Deployment.yaml #77 (@abhishekjiitr)
Bugfix: Revert cluster labels (see discussion in #78) #79

0.5.2

Implement consumer group whitelist #75
Allow whitelisting Kafka topics #65 (@NeQuissimus)
Omit service account generation when not using strimzi #64 (@khorshuheng)
Adding support to control which prometheus metrics to expose #62 (@khorshuheng)
Adds custom labels for every cluster #61 (@anbarasantr)
Adding support for custom annotations on pods #59 (@WarpRat)
Allow Helm to quote Kafka client property values when necessary #58

0.5.1

Bugfix: Get commit offset for correct group topic partitions #56

0.5.0

Bugfix: Report NaN for group offset, lag, and time lag when no group offset returned. #50
Support arbitrary kafka client configuration. #48
Use ConfigMap to provide app and logging config. #47
Bugfix: Use lag offsets metric in lag offsets panel Grafana dashboard. #39 (@msravan)

0.4.3

Update chart defaults to match app defaults. Poll interval: 30s, Lookup table size: 60.

0.4.2

Bugfix: Check for missing group topic partitions after collecting all group offsets. Regression bugfix. #30
Make simple polling logging INFO log level. Added DEBUG logging to show all offsets collected per poll for troubleshooting.

0.4.1

Remove labels state and is_simple_consumer from group topic partition metrics
Document metric endpoint filtering #24
Document standalone deployment mode #22
Evict metrics from endpoint when they're no longer tracked by Kafka #25
Support clusters with TLS and SASL #21

0.4.0

Open Sourced! 🎆 #17
Add Integration tests using Embedded Kafka #11
Replace lag in time implementation with interpolation table implementation #5
Removed spark-event-exporter. See the spark-committer GitHub project to commit offsets in Spark Structured Streaming back to Kafka. #9
Implement backoff strategy for Kafka connections in Kafka Lag Exporter #6
Travis build #7
Update docs #14
Update Grafana dashboard
Licensing headers
Script release process

0.3.6

Add kafka-client-timeout config.
Tune retry and timeout logic of Kafka admin client and consumer
Use backoff strategy restarting offset collection logic when transient runtime exceptions are encountered
Terminate when Prometheus HTTP server can't start (i.e. port can't be bound)

0.3.1

Default partition to 0 (instead of omitting it from being reported) when a consumer group returns no offset for a group partition
Use akkaSource for actor path in logging

0.3.0

Bugfix: Parse poll-interval in seconds
Rename metric from kafka_consumergroup_latest_offset to kafka_partition_latest_offset
Use JVM 8 experimental cgroup memory awareness flags when running exporter in container
Use snakecase for metric label names
Sample Grafana Dashboard

0.2.0

Strimzi cluster auto discovery

0.1.0

Initial release

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Kafka Lag Exporter

Introduction

Metrics

Labels

Run on Kubernetes

Configuration

Install with Helm

Examples

View the health endpoint

View exporter logs

Run Standalone

Reporters

Configuration

Running Docker Image

Estimate Consumer Group Time Lag

Strimzi Kafka Cluster Watcher

Monitoring with Grafana

Filtering Metrics without Prometheus Server

Health Check

Development

Tests

Testing with local `docker-compose.yaml`

Building your own Helm Chart

Release

Pre-requisites

Release steps

Change log

About

Releases

Packages

Languages

Name		Name	Last commit message	Last commit date
Latest commit History 168 Commits
charts/kafka-lag-exporter		charts/kafka-lag-exporter
docker		docker
docs		docs
examples/standalone		examples/standalone
grafana		grafana
project		project
scripts		scripts
src		src
.gitignore		.gitignore
.travis.yml		.travis.yml
LICENSE		LICENSE
README.md		README.md
build.sbt		build.sbt
version.sbt		version.sbt

License

jtribble/kafka-lag-exporter

Folders and files

Latest commit

History

Repository files navigation

Kafka Lag Exporter

Introduction

Metrics

Labels

Run on Kubernetes

Configuration

Install with Helm

Examples

View the health endpoint

View exporter logs

Run Standalone

Reporters

Configuration

Running Docker Image

Estimate Consumer Group Time Lag

Strimzi Kafka Cluster Watcher

Monitoring with Grafana

Filtering Metrics without Prometheus Server

Health Check

Development

Tests

Testing with local docker-compose.yaml

Building your own Helm Chart

Release

Pre-requisites

Release steps

Change log

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Testing with local `docker-compose.yaml`

Packages