Custom BIOS for Huananzhi X99-F8 Gaming (2021 Edition)

(For Motherboard 2021 Edition, with nuvoTon NCT5567D-B)

CX99DE29 BIOS for HUANANZHI X99-F8 GAMING Motherboard 11/09/2021

Sponsored by: Subscriber

RELEASES

• Release CX99DE29 November 09, 2021

CREDITS

Builder: iEngineer

BEFORE YOU PROCEED

• ⚠️ Check your motherboard revision! This firmware only for motherboards witn nuvoTon NCT5567D-B, 2021 release!

• ⚠️ If you have factory stock firmware - YOU MUST USE A PROGRAMMER DEVICE! (e.g. EZP-2019 or CH341A)

• ⚠️ If you ignored the warning above and flashed your BIOS using firmware update software, please don't create issues, read the instructions carefully and get a programmer device as stated!

• ⚠️ In some cases, it is required to clear CMOS data, for that, you must unplug all power cables to the motherboard and remove the CMOS battery. This is due to the lack of standardization of chinese motherboard manufacturers.

FIRMWARE FEATURES

• UEFI / CSM
• RAID
• Set FSB to 100 MHz
• ME firmware to v9.1.45.3000 (5MiB)
• EFI/OROM for RSTe SATA(Port 0-3)/sSATA(Port 4-7) to v5.5.5.1005 (Full I/O speed)
• CPU microcode
• AMI NVMe firmware
• LAN BOOT ROM
• EFI Realtek UNDI PCIe GbE Family Controller Driver v2.054 (06/30/2020)
• DMI Data

HOW TO UPDATE THE FIRMWARE

⚠️ If you have factory stock firmware - YOU MUST USE A PROGRAMMER DEVICE! (e.g. EZP-2019 or CH341A)

1. Burn the firmware with a programmer device. (e.g. EZP-2019 or CH341A) Instruction for CH341A
2. Clear CMOS by plugging motherboar power cables and removing the CMOS battery for a few seconds then plug again.
3. After restart load setup defauls by entering the BIOS setting and then Restore Defaults -> F10 -> Enter
4. Configure RAM timings and other settings and enjoy!

DRIVERS DOWNLOAD

Intel Chipset Driver for Windows 10 x64 Download

IRSTe SATA RAID Driver for Windows 10 x64 Download

PCIe Realtek GbE Driver for Windows 10 x64 Download

Realtek High Definition Audio Drivers 2.81 for Windows 10 x64 Download (Google Search)

SCREENSHOTS