Getting Started

Getting Started

The ESP32 Marauder firmware can be installed on a wide range of ESP32 hardware. In this repository, you will find precompiled binaries for a few specific pieces of hardware. If your hardware is not found or none of the binaries are compatible with your hardware setup, you will likely need to build the Marauder firmware from source. This page will point you in the right direction whether you're looking to build your own Marauder, install the firmware on existing hardware, or build the project from source. Please use the table below to figure out where you need to go.

Choose Your Path

• Already have an ESP32 Marauder and want to know how to use it?
  • Marauder Hardware Explained
  • Using the Marauder CLI
  • Using the Marauder GUI
  • Marauder Settings
  • GPS Modification/Wardriving?
• Want to build your own custom firmware?
  • Building Firmware From Source
• You purchased an ESP32 Wemos D1 Mini Adapter and need to install the firmware?
  • Updating Marauder Firmware
• Trying to use your Flipper Zero WiFi Dev Board for pentesting?
  • Installing Marauder on the Flipper Zero WiFi Dev Board
• Received and ESP32 Marauder Kit from my shop and want to put it together?
  • Assembling ESP32 Marauder Kit
• Want to update your Marauder firmware to a new version?
  • Updating Marauder Firmware
• Curious how the Marauder is built and you want to try it yourself?
  • Build A Marauder
• Shit where the fuck do I put all of my antennas on my BFFB?!?!
  • BFFB Guide