virtual cluster e2e tests changes

Signed-off-by: Sebastian Sch <[email protected]>

.github/workflows/virtual-cluster.yml

@@ -0,0 +1,43 @@
+name: sriov-operator-test
+on: [pull_request]
+
+jobs:
+  virtual-k8s-cluster:
+    name: k8s
+    runs-on: [sriov]
+    steps:
+      - name: Check out code into the Go module directory
+        uses: actions/checkout@v2
+
+      - name: Set up Go 1.20
+        uses: actions/setup-go@v3
+        with:
+          go-version: 1.20.x
+
+      - name: run test
+        run: make test-e2e-conformance-virtual-k8s-cluster-ci
+
+      - uses: actions/upload-artifact@v3
+        with:
+          name: artifact
+          path: ./artifacts.tar.gz
+
+  virtual-ocp:
+    name: ocp
+    runs-on: [ ocp ]
+    steps:
+      - name: Check out code into the Go module directory
+        uses: actions/checkout@v2
+
+      - name: Set up Go 1.20
+        uses: actions/setup-go@v3
+        with:
+          go-version: 1.20.x
+
+      - name: run test
+        run: make test-e2e-conformance-virtual-ocp-cluster-ci
+
+      - uses: actions/upload-artifact@v3
+        with:
+          name: artifact
+          path: ./artifacts.tar.gz

Makefile

@@ -181,6 +181,18 @@ deploy-setup-k8s: deploy-setup
 test-e2e-conformance:
 	SUITE=./test/conformance ./hack/run-e2e-conformance.sh
 
+test-e2e-conformance-virtual-k8s-cluster-ci:
+	./hack/run-e2e-conformance-virtual-cluster.sh
+
+test-e2e-conformance-virtual-k8s-cluster:
+	SKIP_DELETE=TRUE ./hack/run-e2e-conformance-virtual-cluster.sh
+
+test-e2e-conformance-virtual-ocp-cluster-ci:
+	./hack/run-e2e-conformance-virtual-ocp.sh
+
+test-e2e-conformance-virtual-ocp-cluster:
+	SKIP_DELETE=TRUE ./hack/run-e2e-conformance-virtual-ocp.sh
+
 test-e2e-validation-only:
 	SUITE=./test/validation ./hack/run-e2e-conformance.sh	
 

deploy/configmap.yaml

@@ -7,6 +7,7 @@ data:
   Intel_i40e_25G_SFP28: "8086 158b 154c"
   Intel_i40e_10G_X710_SFP: "8086 1572 154c"
   Intel_ixgbe_10G_X550: "8086 1563 1565"
+  Intel_ixgbe_82576: "8086 10c9 10ca"
   Intel_i40e_X710_X557_AT_10G: "8086 1589 154c"
   Intel_i40e_10G_X710_BACKPLANE: "8086 1581 154c"
   Intel_i40e_10G_X710_BASE_T: "8086 15ff 154c"

deployment/sriov-network-operator/templates/configmap.yaml

@@ -7,6 +7,7 @@ data:
   Intel_i40e_25G_SFP28: "8086 158b 154c"
   Intel_i40e_10G_X710_SFP: "8086 1572 154c"
   Intel_ixgbe_10G_X550: "8086 1563 1565"
+  Intel_ixgbe_82576: "8086 10c9 10ca"
   Intel_i40e_X710_X557_AT_10G: "8086 1589 154c"
   Intel_i40e_10G_X710_BACKPLANE: "8086 1581 154c"
   Intel_i40e_10G_X710_BASE_T: "8086 15ff 154c"

doc/testing-virtual-machine.md

@@ -0,0 +1,58 @@
+## E2E conformance test
+
+It's possible to use QEMU to test the SR-IOV operator on a virtual kubernetes/openshift cluster.
+Using the IGB model network driver allow to create virtual functions on the virtual system
+
+## How to test
+
+First you will need to enable the `DEV_MODE` via the operator environment variable.
+Second step is to add the intel virtual nic to the supported nics configmap.
+
+Another requirement is to load the vfio kernel module with no_iommu configuration. Example systemd:
+
+```
+[Unit]
+Description=vfio no-iommu
+Before=kubelet.service crio.service node-valid-hostname.service
+
+[Service]
+# Need oneshot to delay kubelet
+Type=oneshot
+ExecStart=/usr/bin/bash -c "modprobe vfio enable_unsafe_noiommu_mode=1"
+StandardOutput=journal+console
+StandardError=journal+console
+
+[Install]
+WantedBy=network-online.target
+```
+
+### Prerequisites
+* kcli - deployment tool (https://github.com/karmab/kcli)
+* virsh 
+* qemu > 8.1
+* libvirt > 9
+* podman
+* make
+* go
+
+## Deploy the cluster
+
+use the deployment [script](../hack/run-e2e-conformance-virtual-cluster.sh), this will deploy a k8s cluster
+compile the operator images and run the e2e tests.
+
+example:
+```
+SKIP_DELETE=TRUE make test-e2e-conformance-virtual-k8s-cluster 
+```
+
+It's also possible to skip the tests and only deploy the cluster running
+
+```
+SKIP_TEST=TRUE SKIP_DELETE=TRUE make test-e2e-conformance-virtual-k8s-cluster
+```
+
+To use the cluster after the deployment you need to export the kubeconfig
+
+```
+export KUBECONFIG=$HOME/.kcli/clusters/virtual/auth/kubeconfig
+```