Jetson Nano

1. 2 GB motherboards start with the GNOME desktop environment, and change to LXDE after the Ubuntu configuration is complete.
2. 4 GB motherboards start with GNOME and stay with GNOME.
3. 2 GB motherboards can be terraformed with tensorflow 1.x or without tensorflow.
4. 4 GB motherboards can be terraformed with tensorflow 1.x or 2.x.

GNOME.jpg	LXDE.jpg
GNOME - 4 GB motherboards	LXDE - ref - 2 GB motherboards

4GB tf 1.x

1. download Jetson Nano Developer Kit w/ JetPack 4.3
2. complete step 2.

2GB tf 1.x

1. download Jetson Nano Developer Kit w/ JetPack 4.4.
2. complete step 2

2GB no tf

1. download Jetson Nano Developer Kit w/ JetPack 4.6.
2. complete step 2.

4GB tf 2.x 🚧

1. download Jetson Nano Developer Kit w/ JetPack 4.6.
2. complete step 2.

step 2

1. [4 GB + faster terraform option for 2GB] connect a network cable to the ethernet connection on the motherboard or connect one of the USB-A ports on the motherboard to a smartphone and enable USB-tethering on the phone.

2. Follow these instructions w/ the image that you downloaded above. Boot the motherboard.

3. Set username to bolt and password to bolt2025 and Select Log in automatically.

4. [GNOME] go to System Settings > Brightness & Lock, set Turn Screen off when inactive for to Never, turn Lock off, disable Require password when waking from suspend.

5. [LXDE] Select Preferances > Screensaver - change Display Modes -> Mode to Disable Screen Saver.

6. Insert a seed usb key, open a terminal, and run bash /media/bolt/SEED/bolt/jetson.sh.

7. Type in sudo visudo and add abcli ALL=(ALL) NOPASSWD: ALL to the end of the file.

8. [4 GB] attach a TP-Link AC600 Mini USB WiFi Adapter to the motherboard, detach the USB/ethernet cable from the motherboard, and reboot.