Jetson Nano

2 GB motherboards start with the GNOME desktop environment, and change to LXDE after the Ubuntu configuration is complete. 4 GB motherboards start with GNOME and stay with GNOME.

GNOME	LXDE

---

1. Download the image.

   • 2GB, no tf: Jetson Nano Developer Kit w/ JetPack 4.6
   • 2GB, tf 1.x: Jetson Nano Developer Kit w/ JetPack 4.4
   • 4GB, tf 1.x: Jetson Nano Developer Kit w/ JetPack 4.3
   • 4GB, tf 2.x: Jetson Nano Developer Kit w/ JetPack 4.6

2. [4 GB + faster terraform option for 2GB] Connect a network cable to the ethernet connection on the motherboard or connect one of the USB-A ports on the motherboard to a smartphone and enable USB-tethering on the phone.

3. Follow these instructions w/ the image that you downloaded above. Boot the motherboard.

4. Set username to abcli and password to abcli2025 and Select Log in automatically.

5. [GNOME] Go to System Settings > Brightness & Lock, set Turn Screen off when inactive for to Never, turn Lock off, disable Require password when waking from suspend.

6. [LXDE] Select Preferances > Screensaver - change Display Modes -> Mode to Disable Screen Saver.

7. Insert a seed usb key, open a terminal, and run bash /media/abcli/SEED/abcli/jetson.sh.

8. Type in sudo visudo and add abcli ALL=(ALL) NOPASSWD: ALL to the end of the file.

9. [4 GB] Attach a TP-Link AC600 Mini USB WiFi Adapter to the motherboard, detach the USB/ethernet cable from the motherboard, and reboot.