Mini boot

.gitignore

@@ -3,3 +3,4 @@ TAGS
 tags
 cscope.out
 build
+*~

CREDITS

@@ -0,0 +1,12 @@
+This is at least a partial credits-file of people that have
+contributed to the Maple bootloader.  It is formatted the same way the
+Linux kernel CREDITS file is structured: sorted by name and formatted
+for easy processing.
+
+The fields are: name (N), email (E), web-address (W), description (D).
+
+----------
+
+N: Tormod Volden
+E: [email protected]
+D: Fixes for DFU compliance

Makefile

@@ -17,8 +17,8 @@ ST_LIB = stm32_lib
 ST_USB = usb_lib
 
 # Optimization level [0,1,2,3,s]
-OPT = 0
-DEBUG = -g
+OPT ?= 0
+DEBUG = 
 #DEBUG = dwarf-2
 
 INCDIRS = ./$(ST_LIB) ./$(ST_USB)
@@ -81,7 +81,7 @@ ALL_ASFLAGS = -mcpu=$(MCU) $(THUMB_IW) -I. -x assembler-with-cpp $(ASFLAGS)
 # file management
 ASRC = $(ST_LIB)/c_only_startup.s $(ST_LIB)/cortexm3_macro.s
 
-STM32SRCS = 
+STM32SRCS =
 
 _STM32USBSRCS = usb_regs.c \
 usb_int.c \
@@ -117,7 +117,7 @@ build: elf bin lss sym
 
 bin: $(TARGET).bin
 elf: $(TARGET).elf
-lss: $(TARGET).lss 
+lss: $(TARGET).lss
 sym: $(TARGET).sym
 dfu: $(TARGET).bin
 	sudo dfu-util -d 0110:1001 -a 0 -D $(TARGET).bin
@@ -139,15 +139,15 @@ end:
 	@echo
 sizeafter:
 	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
-gccversion: 
+gccversion:
 	@$(CC) --version
 
-program: 
+program:
 	@echo "Flash-programming with OpenOCD"
 	cp $(TARGET).bin flash/tmpflash.bin
 	cd flash && openocd -f flash.cfg
 
-program_serial: 
+program_serial:
 	@echo "Flash-programming with stm32loader.py"
 	./flash/stm32loader.py -p /dev/ttyUSB0 -evw build/maple_boot.bin
 
@@ -192,7 +192,7 @@ run: $(TARGET).bin
 
 
 # Link: create ELF output file from object files.
-.SECONDARY : $(TARGET).elf 
+.SECONDARY : $(TARGET).elf
 .PRECIOUS : $(COBJ) $(AOBJ)
 
 %.elf:  $(COBJ) $(AOBJ)
@@ -204,7 +204,7 @@ run: $(TARGET).bin
 $(COBJ) : $(BUILDDIR)/%.o : %.c
 	@echo
 	@echo $(MSG_COMPILING) $<
-	$(CC) -c $(THUMB) $(ALL_CFLAGS) $< -o $@ 
+	$(CC) -c $(THUMB) $(ALL_CFLAGS) $< -o $@
 
 # Assemble: create object files from assembler source files. ARM/Thumb
 $(AOBJ) : $(BUILDDIR)/%.o : %.s

README

@@ -11,7 +11,7 @@ usb.c
 
 usb_callbacks.c 
   - aka endpoints: handling data transfer when "Configured". calls out to 
-    application specific callbacks (eg DFU or serial shit)
+    application specific callbacks (i.e. DFU).
 
 usb_descriptor.c 
   - aka application descriptor; big static struct and callbacks for sending
@@ -29,10 +29,7 @@ hardware.c
 dfu.c
   - mostly the giant FSM case switch, also some USB endpoint callbacks
 
-
 TODO --------------------------------------------------------------------------
 
- * tap reset then quickly tap The Button leaves the board in dfu wait loop 
-   forever instead of just 2 seconds
-
- * use sizeof() for usb application descriptor
+ * pack the structs
+ * use sizeof() for usb application descriptor once structs are packed

config.h

@@ -59,7 +59,9 @@
 #define BOOTLOADER_WAIT 6
 
 #define USER_CODE_RAM     ((u32)0x20000C00)
+#define RAM_END           ((u32)0x20005000)
 #define USER_CODE_FLASH   ((u32)0x08005000)
+#define FLASH_END         ((u32)0x08020000)
 
 #define VEND_ID0 0xAF
 #define VEND_ID1 0x1E