realtek: add support for HPE 1920-48G (JG927A) and 1920-48G-PoE (JG928A)

Hardware information: --------------------- - SoC: RTL8393M - Copper phy: 6×RTL8218B - Fibre phy: RTL8214FC - Flash: 32MiB SPI NOR, MX25L25635FMI - RAM: 128MiB DDR3, Micron MT41K64M16TW-107 - Serial port: ±5V serial port to RJ45, ZT3232 (MAX3232 compatible) - +370W POE on JG928A model Note: SFP ports currently non-functional due to missing support for RTL8214FC on the RTL8393M target. Updated for Linux 6.6 kernel. Installation: ------------- - Initial installation follows same process as HPE 1920-24G (JG924A) - Based on prior work of Jan Hoffmann <[email protected]> - Additional work by Andreas Böhler <[email protected]> - PoE updates and tidy-up by Stephen Howell <[email protected]> Signed-off-by: Stephen Howell <[email protected]>
lede-project · Sep 17, 2024 · 732f539 · 732f539
1 parent afa9811
commit 732f539
Show file tree

Hide file tree

Showing 10 changed files with 299 additions and 3 deletions.
diff --git a/target/linux/realtek/base-files/etc/board.d/02_network b/target/linux/realtek/base-files/etc/board.d/02_network
@@ -35,7 +35,9 @@ hpe,1920-8g|\
 hpe,1920-8g-poe-65w|\
 hpe,1920-8g-poe-180w|\
 hpe,1920-16g|\
-hpe,1920-24g)
+hpe,1920-24g|\
+hpe,1920-48g|\
+hpe,1920-48g-poe)
 	label_mac=$(mtd_get_mac_binary factory 0x68)
 	lan_mac=$label_mac
 	mac_count1=$(hexdump -v -n 4 -s 0x110 -e '4 "%d"' $(find_mtd_part factory) 2>/dev/null)
@@ -89,6 +91,11 @@ hpe,1920-8g-poe-65w)
 hpe,1920-8g-poe-180w)
 	ucidef_set_poe 180 "$(filter_port_list_reverse "$lan_list" "lan9 lan10")"
 	;;
+hpe,1920-48g-poe)
+	ucidef_set_poe 370 "lan8 lan7 lan6 lan5 lan4 lan3 lan2 lan1 lan16 lan15 lan14 lan13 lan12 lan11 lan10 lan9 lan24 lan23
+			lan22 lan21 lan20 lan19 lan18 lan17 lan32 lan31 lan30 lan29 lan28 lan27 lan26 lan25 lan40 lan39 lan38 lan37
+			lan36 lan35 lan34 lan33 lan48 lan47 lan46 lan45 lan44 lan43 lan42 lan41"
+	;;
 netgear,gs110tpp-v1)
 	ucidef_set_poe 130 "$(filter_port_list "$lan_list" "lan9 lan10")"
 	;;

diff --git a/target/linux/realtek/dts/rtl8380_hpe_1920-8g.dtsi b/target/linux/realtek/dts/rtl8380_hpe_1920-8g.dtsi
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
 #include "rtl838x.dtsi"
-#include "rtl838x_hpe_1920.dtsi"
+#include "rtl83xx_hpe_1920.dtsi"
 
 / {
 	gpio1: rtl8231-gpio {

diff --git a/target/linux/realtek/dts/rtl8382_hpe_1920.dtsi b/target/linux/realtek/dts/rtl8382_hpe_1920.dtsi
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
 #include "rtl838x.dtsi"
-#include "rtl838x_hpe_1920.dtsi"
+#include "rtl83xx_hpe_1920.dtsi"
 
 / {
 	gpio1: rtl8231-gpio {

diff --git a/target/linux/realtek/dts/rtl8393_hpe_1920-48g-poe.dts b/target/linux/realtek/dts/rtl8393_hpe_1920-48g-poe.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "rtl8393_hpe_1920.dtsi"
+
+/ {
+	compatible = "hpe,1920-48g-poe", "realtek,rtl8393-soc";
+	model = "HPE 1920-48G-PoE (JG928A)";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/target/linux/realtek/dts/rtl8393_hpe_1920-48g.dts b/target/linux/realtek/dts/rtl8393_hpe_1920-48g.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "rtl8393_hpe_1920.dtsi"
+
+/ {
+	compatible = "hpe,1920-48g", "realtek,rtl8393-soc";
+	model = "HPE 1920-48G (JG927A)";
+};
diff --git a/target/linux/realtek/dts/rtl8393_hpe_1920.dtsi b/target/linux/realtek/dts/rtl8393_hpe_1920.dtsi
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "rtl839x.dtsi"
+#include "rtl83xx_hpe_1920.dtsi"
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: led-0 {
+			label = "green:power";
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	i2c0: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	sfp0: sfp-p49 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c0>;
+		los-gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&gpio0 19 GPIO_ACTIVE_LOW>;
+		// tx-fault unconnected (TODO?)
+		// tx-disable connected to RTL8214FC (TODO?)
+	};
+
+	i2c1: i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	sfp1: sfp-p50 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		los-gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		// tx-fault unconnected (TODO?)
+		// tx-disable connected to RTL8214FC (TODO?)
+	};
+
+	// not enabled due to shared I2C clock
+	i2c2: i2c-gpio-2 {
+		status = "disabled";
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	sfp2: sfp-p51 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c2>;
+		los-gpio = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		// tx-fault unconnected (TODO?)
+		// tx-disable connected to RTL8214FC (TODO?)
+	};
+
+	// not enabled due to shared I2C clock
+	i2c3: i2c-gpio-3 {
+		status = "disabled";
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	sfp3: sfp-p52 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c3>;
+		los-gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		// tx-fault unconnected (TODO?)
+		// tx-disable connected to RTL8214FC (TODO?)
+	};
+};
+
+&ethernet0 {
+	mdio: mdio-bus {
+		compatible = "realtek,rtl838x-mdio";
+		regmap = <&ethernet0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		EXTERNAL_PHY(0)
+		EXTERNAL_PHY(1)
+		EXTERNAL_PHY(2)
+		EXTERNAL_PHY(3)
+		EXTERNAL_PHY(4)
+		EXTERNAL_PHY(5)
+		EXTERNAL_PHY(6)
+		EXTERNAL_PHY(7)
+
+		EXTERNAL_PHY(8)
+		EXTERNAL_PHY(9)
+		EXTERNAL_PHY(10)
+		EXTERNAL_PHY(11)
+		EXTERNAL_PHY(12)
+		EXTERNAL_PHY(13)
+		EXTERNAL_PHY(14)
+		EXTERNAL_PHY(15)
+
+		EXTERNAL_PHY(16)
+		EXTERNAL_PHY(17)
+		EXTERNAL_PHY(18)
+		EXTERNAL_PHY(19)
+		EXTERNAL_PHY(20)
+		EXTERNAL_PHY(21)
+		EXTERNAL_PHY(22)
+		EXTERNAL_PHY(23)
+
+		EXTERNAL_PHY(24)
+		EXTERNAL_PHY(25)
+		EXTERNAL_PHY(26)
+		EXTERNAL_PHY(27)
+		EXTERNAL_PHY(28)
+		EXTERNAL_PHY(29)
+		EXTERNAL_PHY(30)
+		EXTERNAL_PHY(31)
+
+		EXTERNAL_PHY(32)
+		EXTERNAL_PHY(33)
+		EXTERNAL_PHY(34)
+		EXTERNAL_PHY(35)
+		EXTERNAL_PHY(36)
+		EXTERNAL_PHY(37)
+		EXTERNAL_PHY(38)
+		EXTERNAL_PHY(39)
+
+		EXTERNAL_PHY(40)
+		EXTERNAL_PHY(41)
+		EXTERNAL_PHY(42)
+		EXTERNAL_PHY(43)
+		EXTERNAL_PHY(44)
+		EXTERNAL_PHY(45)
+		EXTERNAL_PHY(46)
+		EXTERNAL_PHY(47)
+
+		EXTERNAL_SFP_PHY_FULL(48, 1)
+		EXTERNAL_SFP_PHY_FULL(49, 3)
+		EXTERNAL_SFP_PHY_FULL(50, 0)
+		EXTERNAL_SFP_PHY_FULL(51, 2)
+	};
+};
+
+&switch0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		SWITCH_PORT(0, 1, qsgmii)
+		SWITCH_PORT(1, 2, qsgmii)
+		SWITCH_PORT(2, 3, qsgmii)
+		SWITCH_PORT(3, 4, qsgmii)
+		SWITCH_PORT(4, 5, qsgmii)
+		SWITCH_PORT(5, 6, qsgmii)
+		SWITCH_PORT(6, 7, qsgmii)
+		SWITCH_PORT(7, 8, qsgmii)
+
+		SWITCH_PORT(8, 9, qsgmii)
+		SWITCH_PORT(9, 10, qsgmii)
+		SWITCH_PORT(10, 11, qsgmii)
+		SWITCH_PORT(11, 12, qsgmii)
+		SWITCH_PORT(12, 13, qsgmii)
+		SWITCH_PORT(13, 14, qsgmii)
+		SWITCH_PORT(14, 15, qsgmii)
+		SWITCH_PORT(15, 16, qsgmii)
+
+		SWITCH_PORT(16, 17, qsgmii)
+		SWITCH_PORT(17, 18, qsgmii)
+		SWITCH_PORT(18, 19, qsgmii)
+		SWITCH_PORT(19, 20, qsgmii)
+		SWITCH_PORT(20, 21, qsgmii)
+		SWITCH_PORT(21, 22, qsgmii)
+		SWITCH_PORT(22, 23, qsgmii)
+		SWITCH_PORT(23, 24, qsgmii)
+
+		SWITCH_PORT(24, 25, qsgmii)
+		SWITCH_PORT(25, 26, qsgmii)
+		SWITCH_PORT(26, 27, qsgmii)
+		SWITCH_PORT(27, 28, qsgmii)
+		SWITCH_PORT(28, 29, qsgmii)
+		SWITCH_PORT(29, 30, qsgmii)
+		SWITCH_PORT(30, 31, qsgmii)
+		SWITCH_PORT(31, 32, qsgmii)
+
+		SWITCH_PORT(32, 33, qsgmii)
+		SWITCH_PORT(33, 34, qsgmii)
+		SWITCH_PORT(34, 35, qsgmii)
+		SWITCH_PORT(35, 36, qsgmii)
+		SWITCH_PORT(36, 37, qsgmii)
+		SWITCH_PORT(37, 38, qsgmii)
+		SWITCH_PORT(38, 39, qsgmii)
+		SWITCH_PORT(39, 40, qsgmii)
+
+		SWITCH_PORT(40, 41, qsgmii)
+		SWITCH_PORT(41, 42, qsgmii)
+		SWITCH_PORT(42, 43, qsgmii)
+		SWITCH_PORT(43, 44, qsgmii)
+		SWITCH_PORT(44, 45, qsgmii)
+		SWITCH_PORT(45, 46, qsgmii)
+		SWITCH_PORT(46, 47, qsgmii)
+		SWITCH_PORT(47, 48, qsgmii)
+
+		SWITCH_PORT(48, 50, qsgmii)
+		SWITCH_PORT(49, 52, qsgmii)
+		SWITCH_PORT(50, 49, qsgmii)
+		SWITCH_PORT(51, 51, qsgmii)
+
+		port@52 {
+			ethernet = <&ethernet0>;
+			reg = <52>;
+			phy-mode = "internal";
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/...t/linux/realtek/dts/rtl838x_hpe_1920.dtsi → ...t/linux/realtek/dts/rtl83xx_hpe_1920.dtsi b/...t/linux/realtek/dts/rtl838x_hpe_1920.dtsi → ...t/linux/realtek/dts/rtl83xx_hpe_1920.dtsi
diff --git a/target/linux/realtek/image/rtl839x.mk b/target/linux/realtek/image/rtl839x.mk
@@ -9,6 +9,23 @@ define Device/d-link_dgs-1210-52
 endef
 TARGET_DEVICES += d-link_dgs-1210-52
 
+define Device/hpe_1920-48g
+  $(Device/hpe_1920)
+  SOC := rtl8393
+  DEVICE_MODEL := 1920-48G (JG927A)
+  H3C_DEVICE_ID := 0x0001002a
+endef
+TARGET_DEVICES += hpe_1920-48g
+
+define Device/hpe_1920-48g-poe
+  $(Device/hpe_1920)
+  SOC := rtl8393
+  DEVICE_MODEL := 1920-48G-PoE (JG928A)
+  DEVICE_PACKAGES += realtek-poe
+  H3C_DEVICE_ID := 0x0001002b
+endef
+TARGET_DEVICES += hpe_1920-48g-poe
+
 # When the factory image won't fit anymore, it can be removed.
 # New installation will be performed booting the initramfs image from
 # ram and then flashing the sysupgrade image from OpenWrt

diff --git a/target/linux/realtek/rtl839x/config-5.15 b/target/linux/realtek/rtl839x/config-5.15
@@ -88,6 +88,8 @@ CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_REALTEK_OTTO=y
 CONFIG_GPIO_RTL8231=y
+CONFIG_GPIO_WATCHDOG=y
+# CONFIG_GPIO_WATCHDOG_ARCH_INITCALL is not set
 CONFIG_GRO_CELLS=y
 CONFIG_HANDLE_DOMAIN_IRQ=y
 CONFIG_HARDWARE_WATCHPOINTS=y
@@ -150,6 +152,7 @@ CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_SPLIT_BRNIMAGE_FW=y
 CONFIG_MTD_SPLIT_EVA_FW=y
 CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_SPLIT_H3C_VFS=y
 CONFIG_MTD_SPLIT_TPLINK_FW=y
 CONFIG_MTD_SPLIT_UIMAGE_FW=y
 CONFIG_MTD_VIRT_CONCAT=y

diff --git a/target/linux/realtek/rtl839x/config-6.6 b/target/linux/realtek/rtl839x/config-6.6
@@ -88,6 +88,8 @@ CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_REALTEK_OTTO=y
 CONFIG_GPIO_RTL8231=y
+CONFIG_GPIO_WATCHDOG=y
+# CONFIG_GPIO_WATCHDOG_ARCH_INITCALL is not set
 CONFIG_GRO_CELLS=y
 CONFIG_HANDLE_DOMAIN_IRQ=y
 CONFIG_HARDWARE_WATCHPOINTS=y
@@ -150,6 +152,7 @@ CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_SPLIT_BRNIMAGE_FW=y
 CONFIG_MTD_SPLIT_EVA_FW=y
 CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_SPLIT_H3C_VFS=y
 CONFIG_MTD_SPLIT_TPLINK_FW=y
 CONFIG_MTD_SPLIT_UIMAGE_FW=y
 CONFIG_MTD_VIRT_CONCAT=y