Onbox docker App to enable High-Availability for XRv9k on AWS using IOS-XR Service-Layer API and AWS API
Check out the solution guide: HA_redundancy_xrv9k_soln.pdf for details on how the application works. The figures below capture the design details:
Since the HA App has to interact with the AWS EC2 APIs for state maintenance and to trigger failovers, it is important to reduce the round-trip-time from the HA App (router) to the AWS API endpoint.
Further, there cannot be any compulsion to have a public IP associated with the routers, just so that the HA App can communicate with the public AWS EC2 API. For these reasons, it is necessary to deploy an AWS private-link in the form of a private interface endpoint with an attached IP and domain name that is reachable for the HA router pair.
Private Interface Endpoint Service is created so that routers can access EC2 API without internet access
The endpoint URL utilized by the router HA App is obtained from the interface endpoint Service configuration
Sample boto3 resource creation for interface endpoint service in python is shown below. Using this the interface endpoint can be interacted with in the HA App.
resource = boto3.resource(
  service_name='ec2',
  endpoint_url='https://vpce-0786bfdf8aad8840c-vacmlroq-us-west-2a.ec2.us-west-2.vpce.amazonaws.com',
  aws_access_key_id=ACCESS_KEY,
  aws_secret_access_key=SECRET_KEY,
  aws_session_token=SESSION_TOKEN,
  region_name=REGION_NAME
  )The AWS private interface endpoint must be deployed either manually or using AWS CLI or AWS Cloudformation before the HA App is deployed so that the endpoint_url that the HA App needs to interact with is known before App deployment. More details on it can be found here:
The second pre-requisite for the HA app is to have the ability to create temporary credentials during its lifecycle without having to package user AWS credentials in each onbox container.
To do this, make sure an IAM role with EC2 access is assigned to each router on which the HA App is going to run.
First create a file named ec2-role-trust-policy.json with the following contents:
{
"Version": "2012-10-17",
"Statement": [
{
"Effect": "Allow",
"Principal": { "Service": "ec2.amazonaws.com"},
"Action": "sts:AssumeRole"
}
]
}
Next, create an access policy with a file named ec2-role-access-policy.json with the following contents:
{
"Version": "2012-10-17",
"Statement": [
{
"Effect": "Allow",
"Action": ["ec2:*"],
"Resource": ["*"]
}
]
}
Finally, a simple bash script (setup_iam_role.sh) that uses the AWS CLI on your client machine is given below which can be used to apply the required IAM role to each of the routers in the HA router pair:
Note: Before running this script, make sure the latest AWS CLI v2 is installed on your client machine: https://docs.aws.amazon.com/cli/latest/userguide/getting-started-install.html.
#!/bin/bash
set -x
rtr1_instance_id="i-092b5318d504748cd"
rtr2_instance_id="i-0440aeae55f8166f1"
aws iam create-role --role-name ec2access --assume-role-policy-document file://ec2-role-trust-policy.json
aws iam put-role-policy --role-name ec2access --policy-name EC2-Permissions --policy-document file://ec2-role-access-policy.json
aws iam create-instance-profile --instance-profile-name ec2access-profile
aws iam add-role-to-instance-profile --instance-profile-name ec2access-profile --role-name ec2access
aws ec2 associate-iam-instance-profile --instance-id $rtr1_instance_id --iam-instance-profile Name=ec2access-profile
aws ec2 associate-iam-instance-profile --instance-id $rtr2_instance_id --iam-instance-profile Name=ec2access-profile
aws ec2 describe-iam-instance-profile-associations
These files can be found at the following location in the xrv9k-aws-ha git repository:
Learn more about associating IAM roles with EC2 instances for EC2 API access, here:
https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/iam-roles-for-amazon-ec2.html
Once the IAM role is assigned to each router, the onbox HA Apps can easily fetch their temporary security credentials for EC2 API access using the metadata URL:
http://169.254.169.254/latest/meta-data/iam/security-credentials/ec2access where ec2access is the name of the IAM role assigned to the routers.
Note: Make sure Docker is installed on your build server/laptop - instructions here.
aks::~/ha_app_xrv9k$
aks::~/ha_app_xrv9k$cd core/python/
aks::~/ha_app_xrv9k/core/python$
aks::~/ha_app_xrv9k/core/python$docker build -t akshshar/xrv9k_aws_ha .
Sending build context to Docker daemon 1.477MB
Step 1/17 : FROM python:3.8-slim as builder
---> b298bacb2734
Step 2/17 : RUN apt-get update && apt-get install -y gcc && apt-get clean
---> Using cache
---> 66c9e6285ad9
Step 3/17 : COPY src/app /app
---> ca311a236235
Step 4/17 : WORKDIR app
---> Running in a455c337f656
Removing intermediate container a455c337f656
---> 3b1663658191
Step 5/17 : RUN python3 -m pip install --user -r requirements.txt
---> Running in c12edaaca0a7
Collecting rdbtools
Downloading rdbtools-0.1.15.tar.gz (31 kB)
Collecting python-lzf
Downloading python-lzf-0.2.4.tar.gz (9.3 kB)
Collecting grpcio
Downloading grpcio-1.38.1-cp38-cp38-manylinux2014_x86_64.whl (4.2 MB)
Collecting grpcio-tools
Downloading grpcio_tools-1.38.1-cp38-cp38-manylinux2014_x86_64.whl (2.5 MB)
Collecting boto3
Downloading boto3-1.17.105-py2
..........
Removing intermediate container d2f69f2f2d5d
---> 91195bbe9542
Step 17/17 : CMD ["/usr/local/bin/python3", "/root/.local/bin/supervisord", "-c", "/etc/supervisord.conf", "-n"]
---> Running in 8459c24eceb9
Removing intermediate container 8459c24eceb9
---> c23601535cd8
Successfully built c23601535cd8
Successfully tagged akshshar/xrv9k_aws_ha:latest
aks::~/ha_app_xrv9k/core/python$
aks::~/ha_app_xrv9k/core/python$
The Docker image should appear in the local docker registry:
aks::~/ha_app_xrv9k/core/python$docker images akshshar/xrv9k_aws_ha
REPOSITORY TAG IMAGE ID CREATED SIZE
akshshar/xrv9k_aws_ha latest c23601535cd8 About a minute ago 309MB
aks::~/ha_app_xrv9k/core/python$
Note: If you'd like to download a pre-built docker image from dockerhub, just issue a docker pull:
aks::~$
aks::~$docker pull akshshar/xrv9k-aws-ha:latest
latest: Pulling from akshshar/xrv9k-aws-ha
000eee12ec04: Already exists
ddc2d83f8229: Already exists
3ae1660fa0d9: Already exists
ef709117d3d3: Already exists
487a0421e8fa: Already exists
199045e43db5: Downloading [===========================> ] 10.27MB/18.37MB
5f1db3d1ff14: Download complete
8ee41ff6fca0: Downloading [===========================> ] 8.932MB/16.32MB
d7376ff144fe: Download complete
1a2a1997dd86: Downloading [>
Drop into the app specific folder under /xr-appmgr/ in the root of the cloned git repository and create a tarball from the Docker image.
aks::~/ha_app_xrv9k$
aks::~/ha_app_xrv9k$
aks::~/ha_app_xrv9k$cd xr-appmgr/src/apps/xrv9k_aws_ha/
aks::~/ha_app_xrv9k/xr-appmgr/src/apps/xrv9k_aws_ha$
aks::~/ha_app_xrv9k/xr-appmgr/src/apps/xrv9k_aws_ha$ docker save akshshar/xrv9k-aws-ha:latest > xrv9k_aws_ha.tar
aks::~/ha_app_xrv9k/xr-appmgr/src/apps/xrv9k_aws_ha$
aks::~/ha_app_xrv9k/xr-appmgr/src/apps/xrv9k_aws_ha$
From the /xr-appmgr/ folder, issue a build for xr-appmgr compatible RPM build:
aks::~/ha_app_xrv9k$cd xr-appmgr/
aks::~/ha_app_xrv9k/xr-appmgr$
aks::~/ha_app_xrv9k/xr-appmgr$
aks::~/ha_app_xrv9k/xr-appmgr$ ./appmgr_build -b build.yaml
Starting to build package: xrv9k-aws-ha
Building docker image arhashem/xr-wrl7...
docker build docker -f docker/WRL7.Dockerfile -t arhashem/xr-wrl7
Sending build context to Docker daemon 6.656kB
Step 1/2 : FROM akshshar/xr-wrl7
---> a25bec9d92f6
Step 2/2 : COPY build_rpm.sh /usr/sbin/
---> Using cache
---> 04f3d0717d48
Successfully built 04f3d0717d48
Successfully tagged arhashem/xr-wrl7:latest
Adding sources...
---> xrv9k_aws_ha
Adding configs...
---> xrv9k_aws_ha
Adding data...
Creating source archive...
Generating spec file: xrv9k-aws-ha-0.1.0-eXR.spec
Building RPM...
/usr/sbin/build_rpm.sh --spec-file /usr/src/rpm/SPECS/xrv9k-aws-ha-0.1.0-eXR.spec --source-dir /usr/src/rpm/SOURCES --rpm-dir /usr/src/rpm/RPMS --output-dir /root/RPMS --verbose
+ [[ '' == '' ]]
+ log_file=/tmp/rpmbuild.log
+ [[ /usr/src/rpm/SPECS/xrv9k-aws-ha-0.1.0-eXR.spec == '' ]]
+ [[ /usr/src/rpm/SOURCES == '' ]]
+ [[ /usr/src/rpm/RPMS == '' ]]
+ [[ /root/RPMS == '' ]]
+ mkdir -p /root/RPMS
+ chown -Rf root:root /root/RPMS
+ chown -Rf root:root /usr/src/rpm/SOURCES/xrv9k-aws-ha-0.1.0-eXR.tar.gz
++ dirname /usr/src/rpm/SPECS/xrv9k-aws-ha-0.1.0-eXR.spec
+ chown -Rf root:root /usr/src/rpm/SPECS/xrv9k-aws-ha-0.1.0-eXR.spec
+ [[ '' != '' ]]
+ /usr/bin/rpmbuild --verbose -bb /usr/src/rpm/SPECS/xrv9k-aws-ha-0.1.0-eXR.spec
+ rpm_build_ec=0
+ [[ 0 -eq 0 ]]
+ echo 'RPM built successfully, copying over the RPMs directory to /root/RPMS'
RPM built successfully, copying over the RPMs directory to /root/RPMS
+ [[ '' != '' ]]
+ cp -r /usr/src/rpm/RPMS/noarch /usr/src/rpm/RPMS/x86_64 /root/RPMS
+ sync
+ ls -R /root/RPMS
/root/RPMS:
noarch x86_64
/root/RPMS/noarch:
/root/RPMS/x86_64:
xrv9k-aws-ha-0.1.0-eXR.x86_64.rpm
Done building package xrv9k-aws-ha
aks::~/ha_app_xrv9k/xr-appmgr$
aks::~/ha_app_xrv9k/xr-appmgr$
aks::~/ha_app_xrv9k/xr-appmgr$ ls -l RPMS/x86_64/
total 202112
-rw-r--r-- 1 akshshar staff 95900546 Jul 6 18:07 xrv9k-aws-ha-0.1.0-eXR.x86_64.rpm
aks::~/ha_app_xrv9k/xr-appmgr$
Sample configuration files are present under /core/python/src/app/onbox/ for a two router setup:
{
"config": {
"global_retry_interval": 30,
"global_retry_count": 5,
"ec2_private_endpoint_url": "https://vpce-01c286018e0fad113-vwje496n.ec2.us-west-2.vpce.amazonaws.com",
"grpc_server": "127.0.0.1",
"grpc_port": 57777,
"action": {
"method": "secondary_ip_shift",
"method_params": {
"intf_list": [
{
"secondary_ip": "172.31.105.10",
"instance_intf_number": 2
},
{
"secondary_ip": "172.31.101.10",
"instance_intf_number": 1
}
]
}
},
"bfd_sessions": [
{
"session_type": "SINGLE_HOP",
"intf_name": "TenGigE0/0/0/2",
"neigh_ip": "172.31.105.206",
"bfd_desired_tx_int_usec": 50000,
"detect_multiplier": 3,
"vrf_name": "default"
},
{
"session_type": "SINGLE_HOP",
"intf_name": "TenGigE0/0/0/1",
"neigh_ip": "172.31.101.101",
"bfd_desired_tx_int_usec": 50000,
"detect_multiplier": 3,
"vrf_name": "default"
}
]
}
}
The fields are pretty self explanatory. The Mandatory fields are:
"bfd_sessions""ec2_private_endpoint_url""action"
For the "action" field only the "secondary_ip_shift" method is currently supported.
The host files is set up to eliminate the AWS endpoint-URL DNS lookup which would otherwise increase failover time.
Usually a hosts file would be valid for a HA router pair, but it could be common for all HA router pairs within the same availability zone in the deployment.
A sample hosts file is present under /core/python/src/app/onbox/ and also shown below.
127.0.0.1 localhost.localdomain localhost
172.31.100.237 vpce-01c286018e0fad113-vwje496n.ec2.us-west-2.vpce.amazonaws.com
#####################################################################################
STEP 1: COPY Artifacts to router harddisk
#####################################################################################
---> Before doing an SCP, enable SCP at higher rates into the routers using the following rate-limit policy for SSH in lpts
!
lpts pifib hardware police
flow ssh known rate 15000
flow ssh default rate 15000
!
SCP App RPM and router specific config.json + hosts file (for predetermined resolution for ec2 endpoint url) to harddisk: (/misc/disk1)
scp xrv9k-slbfdha-aws-0.1.0-eXR.x86_64.rpm root@<xrv9k-ip>:/misc/disk1/
scp config_rtr1.json root@<xrv9k-ip>:/misc/disk1/
scp hosts root@<xrv9k-ip>:/misc/disk1/
#####################################################################################
STEP 2: Install Application RPM and move config files to App Folder
#####################################################################################
# Install RPM
appmgr package install rpm /misc/disk1/xrv9k-aws-ha-0.1.0-eXR.x86_64.rpm
# copy config file to config mount of App
copy harddisk:/config.json apphost:/appmgr/config/xrv9k_aws_ha/config.json
# copy hosts file to config mount of App
copy harddisk:/hosts apphost:/appmgr/config/xrv9k_aws_ha/hosts
#####################################################################################
STEP 3: Apply CLI configuration to activate app
#####################################################################################
# Activate App along with grpc server and routes to metadata and endpoint services
!
bfd
echo disable
!
!
appmgr
application xrv9k_aws_ha
activate type docker source xrv9k_aws_ha docker-run-opts "-itd --net=host -v {app_install_root}/config/xrv9k_aws_ha/config.json:/app/onbox/config.json -v {app_install_root}/config/xrv9k_aws_ha/hosts:/etc/hosts"
!
!
!
router static
address-family ipv4 unicast
169.254.169.254/32 172.31.100.1
!
!
tpa
vrf default
address-family ipv4
update-source dataports TenGigE0/0/0/0
!
!
grpc
port 57777
no-tls
service-layer
!
!
--> The above static route and tpa update-source config are used to enable docker applications on XR to access AWS metadata via the 1st data port.
Once the application starts running it can be monitored using xr-appmgr commands:
RP/0/RP0/CPU0:rtr2#show appmgr application name xrv9k_aws_ha info detail
Tue Jul 6 12:53:09.301 UTC
Application: xrv9k_aws_ha
Type: Docker
Source: xrv9k_aws_ha
Config State: Activated
Docker Information:
Container ID: ff9508c510d41c46818f09d423a5f8f5c3e97ed3f212e6db3a56c8024f2e3bc5
Container name: xrv9k_aws_ha
Labels:
Image: akshshar/xrv9k-aws-ha:latest
Command: "/usr/local/bin/python3 /root/.local/bin/supervisord -c /etc/supervisord.conf -n"
Created at: 2021-07-06 11:46:28 +0000 UTC
Running for: About an hour ago
Status: Up About an hour
Size: 4.98MB (virtual 314MB)
Ports:
Mounts: /misc/app_host/appmgr/config/xrv9k_aws_ha/config.json,/misc/app_host/appmgr/config/xrv9k_aws_ha/hosts
Networks: host
LocalVolumes: 0
RP/0/RP0/CPU0:rtr2#
RP/0/RP0/CPU0:rtr2#
RP/0/RP0/CPU0:rtr2#show appmgr application name xrv9k_aws_ha stats
Tue Jul 6 12:53:27.760 UTC
Application Stats: xrv9k_aws_ha
CPU Percentage: 1.90%
Memory Usage: 72.91MiB / 15.05GiB
Memory Percentage: 0.47%
Network IO: 0B / 0B
Block IO: 0B / 0B
PIDs: 0
RP/0/RP0/CPU0:rtr2#
RP/0/RP0/CPU0:rtr2#show appmgr application name xrv9k_aws_ha logs
Tue Jul 6 12:54:02.808 UTC
2021-07-06 11:46:29,227 CRIT Supervisor is running as root. Privileges were not dropped because no user is specified in the config file. If you intend to run as root, you can set user=root in the config file to avoid this message.
2021-07-06 11:46:29,231 CRIT Server 'unix_http_server' running without any HTTP authentication checking
2021-07-06 11:46:29,232 INFO supervisord started with pid 1
2021-07-06 11:46:30,234 INFO spawned: 'ha_app' with pid 6
2021-07-06 11:46:30,235 INFO spawned: 'redis' with pid 7
2021-07-06 11:46:31,237 INFO success: ha_app entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
2021-07-06 11:46:31,237 INFO success: redis entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
2021-07-06 11:51:28,550 WARN received SIGTERM indicating exit request
2021-07-06 11:51:28,550 INFO waiting for ha_app, redis to die
2021-07-06 11:51:28,633 INFO stopped: redis (exit status 0)
2021-07-06 11:51:28,829 INFO stopped: ha_app (exit status 0)
2021-07-06 11:51:36,599 CRIT Supervisor is running as root. Privileges were not dropped because no user is specified in the config file. If you intend to run as root, you can set user=root in the config file to avoid this message.
2021-07-06 11:51:36,604 CRIT Server 'unix_http_server' running without any HTTP authentication checking
2021-07-06 11:51:36,604 INFO supervisord started with pid 1
2021-07-06 11:51:37,606 INFO spawned: 'ha_app' with pid 6
2021-07-06 11:51:37,608 INFO spawned: 'redis' with pid 7
2021-07-06 11:51:38,609 INFO success: ha_app entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
2021-07-06 11:51:38,609 INFO success: redis entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
RP/0/RP0/CPU0:rtr2#
Here the command passed to the docker-exec-command can be used to monitor logs in real time using tail -f as shown below or just a dump of the logs using cat.
Note: The Application specific logs are automatically log rotated to 1MB.
RP/0/RP0/CPU0:rtr2#
RP/0/RP0/CPU0:rtr2#appmgr application exec name xrv9k_aws_ha docker-exec-cmd tail -f /var/log/ha_app_bkp.log
Tue Jul 6 12:55:19.545 UTC
Python: { "loggerName":"SL_HA_APP_LOGGER", "asciTime":"2021-07-06 12:54:39,667", "pathName":"/app/onbox/onbox_bfd_ha_app.py", "logRecordCreationTime":"1625576079.667968", "functionName":"check_ha_state", "levelNo":"20", "lineNo":"479", "levelName":"INFO", "message":"Periodic HA state check..."}
Python: { "loggerName":"SL_HA_APP_LOGGER", "asciTime":"2021-07-06 12:54:39,779", "pathName":"/app/onbox/onbox_bfd_ha_app.py", "logRecordCreationTime":"1625576079.779082", "functionName":"check_ha_state", "levelNo":"20", "lineNo":"482", "levelName":"INFO", "message":"HA State: STANDBY"}
Python: { "loggerName":"SL_HA_APP_LOGGER", "asciTime":"2021-07-06 12:54:49,779", "pathName":"/app/onbox/onbox_bfd_ha_app.py", "logRecordCreationTime":"1625576089.779313", "functionName":"check_ha_state", "levelNo":"20", "lineNo":"479", "levelName":"INFO", "message":"Periodic HA state check..."}
Python: { "loggerName":"SL_HA_APP_LOGGER", "asciTime":"2021-07-06 12:54:49,900", "pathName":"/app/onbox/onbox_bfd_ha_app.py", "logRecordCreationTime":"1625576089.900367", "functionName":"check_ha_state", "levelNo":"20", "lineNo":"482", "levelName":"INFO", "message":"HA State: STANDBY"}
Python: { "loggerName":"SL_HA_APP_LOGGER", "asciTime":"2021-07-06 12:54:59,900", "pathName":"/app/onbox/onbox_bfd_ha_app.py", "logRecordCreationTime":"1625576099.900582", "functionName":"check_ha_state", "levelNo":"20", "lineNo":"479", "levelName":"INFO", "message":"Periodic HA state check..."}
Python: { "loggerName":"SL_HA_APP_LOGGER", "asciTime":"2021-07-06 12:55:00,016", "pathName":"/app/onbox/onbox_bfd_ha_app.py", "logRecordCreationTime":"1625576100.016909", "functionName":"check_ha_state", "levelNo":"20", "lineNo":"482", "levelName":"INFO", "message":"HA State: STANDBY"}
Python: { "loggerName":"SL_HA_APP_LOGGER", "asciTime":"2021-07-06 12:55:10,017", "pathName":"/app/onbox/onbox_bfd_ha_app.py", "logRecordCreationTime":"1625576110.017127", "functionName":"check_ha_state", "levelNo":"20", "lineNo":"479", "levelName":"INFO", "message":"Periodic HA state check..."}
Python: { "loggerName":"SL_HA_APP_LOGGER", "asciTime":"2021-07-06 12:55:10,130", "pathName":"/app/onbox/onbox_bfd_ha_app.py", "logRecordCreationTime":"1625576110.130391", "functionName":"check_ha_state", "levelNo":"20", "lineNo":"482", "levelName":"INFO", "message":"HA State: STANDBY"}
Python: { "loggerName":"SL_HA_APP_LOGGER", "asciTime":"2021-07-06 12:55:20,130", "pathName":"/app/onbox/onbox_bfd_ha_app.py", "logRecordCreationTime":"1625576120.130635", "functionName":"check_ha_state", "levelNo":"20", "lineNo":"479", "levelName":"INFO", "message":"Periodic HA state check..."}
Python: { "loggerName":"SL_HA_APP_LOGGER", "asciTime":"2021-07-06 12:55:20,240", "pathName":"/app/onbox/onbox_bfd_ha_app.py", "logRecordCreationTime":"1625576120.240956", "functionName":"check_ha_state", "levelNo":"20", "lineNo":"482", "levelName":"INFO", "message":"HA State: STANDBY"}
For convenient state verification and troubleshooting purposes, it is possible to utilize an Application specific json-based CLI that utilizes access to the application's Redis database.
All available cli keys/commands can be checked at any time by running show redundancy as an application docker-exec-command as shown below:
RP/0/RP0/CPU0:rtr2#appmgr application exec name xrv9k_aws_ha docker-exec-cmd show redundancy
Tue Jul 6 12:59:21.789 UTC
[
"last_bfd_down_event",
"config",
"last_intf_event",
"ha_state",
"bfd_neighbors",
"ha_interfaces"
]
RP/0/RP0/CPU0:rtr2#
RP/0/RP0/CPU0:rtr2#
Check HA State of the router
RP/0/RP0/CPU0:rtr2#
RP/0/RP0/CPU0:rtr2#appmgr application exec name xrv9k_aws_ha docker-exec-cmd show ha_state
Tue Jul 6 13:00:26.585 UTC
Last Created: 2021/07/06 13:00:24.442059
STANDBY
RP/0/RP0/CPU0:rtr2#
RP/0/RP0/CPU0:rtr2#
**Check Last discovered BFD neighbors (this is not real time BFD state. Use "show bfd session" in XR instead) **
RP/0/RP0/CPU0:rtr2#
RP/0/RP0/CPU0:rtr2#appmgr application exec name xrv9k_aws_ha docker-exec-cmd show bfd_neighbors
Tue Jul 6 13:00:39.300 UTC
Last Created: 2021/07/06 12:09:41.012098
{
"172.31.105.154": {
"EventType": "SL_BFD_EVENT_TYPE_SESSION_STATE",
"Session": {
"Key": {
"Type": "SL_BFD_SINGLE_HOP",
"NbrAddr": 2887739802,
"Interface": {
"Name": "TenGigE0/0/0/2"
}
},
"State": {
"SeqNum": "45",
"Status": "SL_BFD_SESSION_UP"
}
}
},
"172.31.101.241": {
"EventType": "SL_BFD_EVENT_TYPE_SESSION_STATE",
"Session": {
"Key": {
"Type": "SL_BFD_SINGLE_HOP",
"NbrAddr": 2887738865,
"Interface": {
"Name": "TenGigE0/0/0/1"
}
},
"State": {
"SeqNum": "52",
"Status": "SL_BFD_SESSION_UP"
}
}
}
}
RP/0/RP0/CPU0:rtr2#
RP/0/RP0/CPU0:rtr2#
Check Input configuration (config.json) provided to the app
RP/0/RP0/CPU0:rtr2#appmgr application exec name xrv9k_aws_ha docker-exec-cmd show config
Tue Jul 6 13:00:46.610 UTC
Last Created: 2021/07/06 11:51:38.060111
{
"config": {
"global_retry_interval": 30,
"global_retry_count": 5,
"ec2_private_endpoint_url": "https://vpce-01c286018e0fad113-vwje496n.ec2.us-west-2.vpce.amazonaws.com",
"grpc_server": "127.0.0.1",
"grpc_port": 57777,
"action": {
"method": "secondary_ip_shift",
"method_params": {
"intf_list": [
{
"secondary_ip": "172.31.105.20",
"instance_intf_number": 3
},
{
"secondary_ip": "172.31.101.20",
"instance_intf_number": 1
}
]
}
},
"bfd_sessions": [
{
"session_type": "SINGLE_HOP",
"intf_name": "TenGigE0/0/0/2",
"neigh_ip": "172.31.105.154",
"bfd_desired_tx_int_usec": 50000,
"detect_multiplier": 3,
"vrf_name": "default"
},
{
"session_type": "SINGLE_HOP",
"intf_name": "TenGigE0/0/0/1",
"neigh_ip": "172.31.101.241",
"bfd_desired_tx_int_usec": 50000,
"detect_multiplier": 3,
"vrf_name": "default"
}
]
}
}
RP/0/RP0/CPU0:rtr2#
Check Last BFD event and correlate with Applications actions (like failover or ignore)
RP/0/RP0/CPU0:rtr2#
RP/0/RP0/CPU0:rtr2#appmgr application exec name xrv9k_aws_ha docker-exec-cmd show last_bfd_down_event
Tue Jul 6 13:01:04.561 UTC
Last Created: 2021/07/06 12:11:12.123067
{
"EventType": "SL_BFD_EVENT_TYPE_SESSION_STATE",
"Session": {
"Key": {
"Type": "SL_BFD_SINGLE_HOP",
"NbrAddr": 2887738865,
"Interface": {
"Name": "TenGigE0/0/0/1"
}
},
"State": {
"SeqNum": "53",
"Status": "SL_BFD_SESSION_DOWN"
}
}
}
RP/0/RP0/CPU0:rtr2#