GreenWithEnvy (GWE)

GWE is a GTK system utility designed to provide information, control the fans and overclock your NVIDIA video card and graphics processor.

🔴 🔴 Looking for new maintainer(s)! 🔴 🔴

Most probably my next GPU will be an AMD and, if that happens, I won't be able to provide adequate support for this project anymore. For this reason I'm looking for new maintainer(s). If you are interested and have adequate knowledge of Python, please get in touch replying to this issue: https://gitlab.com/leinardi/gwe/-/issues/195

💡 Features

Show general GPU stats (model name, driver version, gpu/memory/power usage, clocks, temps, etc)
GPU and Memory overclock offset profiles
Custom Fan curve profiles
Change power limit
Historical data graphs

📦 How to get GWE

If you don't like to reading manuals and/or you don't know what the Nvidia CoolBits are, you can watch the following How To made by Intelligent Gaming:

Install from Flathub

This is the preferred way to get GWE on any major distribution (Arch, Fedora, Linux Mint, openSUSE, Ubuntu, etc).

If you don't have Flatpak installed you can find step by step instructions here.

Make sure to have the Flathub remote added to the current user:

flatpak --user remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo

Install

flatpak --user install flathub com.leinardi.gwe
flatpak update # needed to be sure to have the latest org.freedesktop.Platform.GL.nvidia

Run

flatpak run com.leinardi.gwe

⚠ Flatpak limitations

Beta Drivers

Currently Flatpak does not support Nvidia Beta drivers like 396.54.09 or 415.22.05.

Bumblebee and Optimus

Currently Flatpak does not support Bumblebee. If you want to use GWE with Bumblebee you need to install it from the source code.

Distro specific packages

Arch Linux

Install the gwe package from the AUR using your favourite helper, for example yay -S gwe.

Fedora

GWE avaliable in official Fedora repos for F31+: sudo dnf install gwe

For older Fedora releases you can use COPR package: sudo dnf copr enable atim/gwe -y && sudo dnf install gwe

Install from source code

Build time dependencies

Distro	pkg-config	Python 3.8+	gobject-introspection	meson	ninja-build	appstream-util
Arch Linux	pkg-config	python	gobject-introspection	meson	ninja	appstream-glib
Fedora	pkgconf-pkg-config	python3-devel	gobject-introspection-devel	meson	ninja-build	appstream-util
OpenSUSE	pkgconf-pkg-config	python3-devel	gobject-introspection-devel	meson	ninja-build	appstream-glib
Ubuntu	pkg-config	python3-dev	libgirepository1.0-dev	meson	ninja-build	appstream-util

Arch Linux:

sudo pacman -S pkg-config python gobject-introspection meson ninja appstream-glib

Fedora:

sudo dnf install pkgconf-pkg-config python3-devel gobject-introspection-devel meson ninja-build appstream-util

OpenSUSE:

sudo zypper install pkgconf-pkg-config python3-devel gobject-introspection-devel meson ninja-build appstream-glib

Ubuntu/Debian:

sudo apt install pkg-config python3-dev libgirepository1.0-dev meson ninja-build appstream-util

Run time dependencies

Distro	Python 3.8+	pip	gobject-introspection	libappindicator	gnome-shell-extension-appindicator	libdazzle
Arch Linux	python	python-pip	gobject-introspection	libappindicator3	gnome-shell-extension-appindicator	libdazzle
Fedora	python3	python3-pip	gobject-introspection-devel	libappindicator-gtk3	gnome-shell-extension-appindicator	libdazzle
OpenSUSE	python3	python3-pip	gobject-introspection	libappindicator3-1	gnome-shell-extension-appindicator	typelib-1_0-libdazzle-1_0
Ubuntu	python3	python3-pip	libgirepository1.0-dev	gir1.2-appindicator3-0.1	gnome-shell-extension-appindicator	libdazzle-1.0-dev
Debian	python3	python3-pip	libgirepository1.0-dev	gir1.2-ayatanaappindicator3-0.1	gnome-shell-extension-appindicator	libdazzle-1.0-dev
[comment]: <> (TODO: confirm if only debian and only KDE-Plasma. Might affect more systems and Desktop Environments)

Arch Linux:

sudo pacman -S python python-pip gobject-introspection libappindicator3 gnome-shell-extension-appindicator libdazzle

Fedora:

sudo dnf install python3 python3-pip gobject-introspection-devel libappindicator-gtk3 gnome-shell-extension-appindicator libdazzle

OpenSUSE:

sudo zypper install python3 python3-pip gobject-introspection libappindicator3-1 gnome-shell-extension-appindicator typelib-1_0-libdazzle-1_0

Ubuntu:

sudo apt install python3 python3-pip libgirepository1.0-dev gir1.2-appindicator3-0.1 gnome-shell-extension-appindicator libdazzle-1.0-dev

Debian:

sudo apt install python3 python3-pip libgirepository1.0-dev gir1.2-ayatanaappindicator3-0.1 gnome-shell-extension-appindicator libdazzle-1.0-dev

plus all the Python dependencies listed in requirements.txt

For Debian (with KDE-Plasma) we have to use --break-system-packages. However, this will break things. Currently only matplotlib. Then we have to use sudo pip3 uninstall matplotlib and then sudo apt reinstall python3-matplotlib

It is recommended to use the flatpak version for Debian.

Clone project and install

If you have not installed GWE yet:

git clone --recurse-submodules -j4 https://gitlab.com/leinardi/gwe.git
cd gwe
git checkout release
sudo -H pip3 install -r requirements.txt
meson . build --prefix /usr
ninja -v -C build
sudo ninja -v -C build install

Update old installation

If you installed GWE from source code previously and you want to update it:

cd gwe
git fetch
git checkout release
git reset --hard origin/release
git submodule init
git submodule update
sudo -H pip3 install -r requirements.txt
meson . build --prefix /usr
ninja -v -C build
sudo ninja -v -C build install

Run

Once installed, to start it you can simply execute on a terminal:

gwe

⚠ Bumblebee and Optimus

If you want to use GWE with Bumblebee you need to start it with optirun and set the --ctrl-display parameter to :8:

optirun gwe --ctrl-display ":8"

ℹ️ TODO

⌨️ Command line options

Parameter	Description	Source	Flatpak
-v, --version	Show the app version	x	x
--debug	Show debug messages	x	x
--hide-window	Start with the main window hidden	x	x
--ctrl-display DISPLAY	Specify the NV-CONTROL display	x	x
--autostart-on	Enable automatic start of the app on login	x
--autostart-off	Disable automatic start of the app on login	x

🖥️ Build, install and run with Flatpak

If you don't have Flatpak installed you can find step by step instructions here.

Make sure to have the Flathub remote added to the current user:

flatpak --user remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo

Clone the repo

git clone --recurse-submodules -j4 https://gitlab.com/leinardi/gwe.git

It is possible to build the local source or the remote one (the same that Flathub uses)

Local repository

./build.sh --flatpak-local --flatpak-install

Remote repository

./build.sh --flatpak-remote --flatpak-install

Run

flatpak run com.leinardi.gwe --debug

❓ FAQ

I see some message about CoolBits in the Overclock/Fan profile section, what's that?

Coolbits was a Windows registry hack for Nvidia graphics cards Windows drivers, that allows tweaking features via the Nvidia driver control panel. Something similar is available also on Linux and is the only way to enable Overclock and manual Fan control. To know more about Coolbits and how to enable them click here (to enable both OC and Fan control you need to set it to 12).

Can I make the power limit survive a reboot?

GWE cannot set the power limit automatically because, to change this value, root permission is required.
If your distribution is using systemd, you can easily set the power limit on boot creating a custom service.

Simply create a new file /etc/systemd/system/nvidia-tdp.timer and paste the following text inside:

[Unit]
Description=Set NVIDIA power limit on boot

[Timer]
OnBootSec=5

[Install]
WantedBy=timers.target

Then create another file /etc/systemd/system/nvidia-tdp.service and paste the following text inside (replace XXX with the power limit value you want to set):

[Unit]
Description=Set NVIDIA power limit

[Service]
Type=oneshot
ExecStartPre=/usr/bin/nvidia-smi -pm 1
ExecStart=/usr/bin/nvidia-smi -pl XXX

Finally, run the following command:

sudo systemctl enable nvidia-tdp.timer

The Flatpak version of GWE is not using my theme, how can I fix it?

To fix this issue install a Gtk theme from Flathub. This way, Flatpak applications will automatically pick the installed Gtk theme and use that instead of Adwaita.

Use this command to get a list of all the available Gtk themes on Flathub:

flatpak --user remote-ls flathub | grep org.gtk.Gtk3theme

And then just install your preferred theme. For example, to install Yaru:

flatpak install flathub org.gtk.Gtk3theme.Yaru

I have installed the app using Flatpak, but all the GWE fields are empty

This issue can be usually solved by closing GWE, executing flatpak update and starting GWE again. This is necessary to be sure to have the latest org.freedesktop.Platform.GL.nvidia. If, after the update, all the fields are still empty, feel free to open a new issue on the project tracker.

Why the memory overclock offsets effectively applied does not match the one set in the Nvidia Settings app?

Because Memory Transfer Rate, what Nvidia Settings reports and changes, is different from the effective Memory Clock, what is actually being displayed by GWE. It is also what other Windows applications like MSI Afterburner show. The Memory Transfer Rate is simply double the Memory Clock.

Where are the settings and profiles stored on the filesystem?

Installation type	Location
Flatpak	`$HOME/.var/app/com.leinardi.gwe/`
Source code	`$XDG_CONFIG_HOME` (usually `$HOME/.config/gwe`)

GreenWithEnvy, why using such name?

The name comes from the slogan of the GeForce 8 series, that was "Green with envy". Nvidia is meant to be pronounced "invidia", which means envy in Latin (and Italian). And their logo is green so, GreenWithEnvy

💚 How to help the project

Help is needed for the following topics

Snap (see #18)
Getting current GTK theme text color (see #36)
Making Bumblebee work with Flatpak (see #35)

Discord server

If you want to help testing or developing it would be easier to get in touch using the discord server of the project: https://discord.gg/xBybdRt Just write a message on the general channel saying how you want to help (test, dev, etc) and quoting @leinardi. If you don't use discor but still want to help just open a new issue here.

Can I support this project some other way?

Something simple that everyone can do is to star it on both GitLab and GitHub. Feedback is always welcome: if you found a bug or would like to suggest a feature, feel free to open an issue on the issue tracker.

⚠ Dropped PyPI support

Development builds were previously distributed using PyPI. This way of distributing the software is simple but requires the user to manually install all the non Python dependencies like cairo, glib, appindicator3, etc. The current implementation of the historical data uses a new library, Dazzle, that requires Gnome 3.30 which is available, using Python Object introspection, only starting from Ubuntu 18.10 making the latest Ubuntu LTS, 18.04, unsupported. A solution for all this problems is distributing the app via Flatpak, since with it all the dependencies will be bundled and provided automatically, making possible to use Gnome 3.30 features also on distributions using an older version of Gnome.

No new build will be published on PyPI.

Uninstall pip version

If you have already installed GWE via pip, please make sure to uninstall it completely before moving to a newer version:

pip3 uninstall gwe
rm -rf ~/.config/gwe

ℹ️ Acknowledgements

Thanks to:

GabMus and TingPing for the huge help with Flatpak
@999eagle for maintaining the AUR package
@tim74 for maintaining the COPR package
Lighty for moderating the Discord server
fbcotter for the py3nvml library
all the devs of the python-xlib library
tiheum for the Faenza icons set, from which I took the current GWE launcher icon
all the people that helped testing and reported bugs

📰 Media coverage

OMG! Ubuntu 🇬🇧
GamingOnLinux 🇬🇧
Phoronix 🇬🇧
ComputerBase 🇩🇪
lffl 🇮🇹
osside blog 🇮🇹
Diolinux 🇧🇷
Blog do Edivaldo 🇧🇷
Linux Adictos 🇪🇸

📝 License

This file is part of gwe.

Copyright (c) 2019 Roberto Leinardi

gwe is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

gwe is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with gwe.  If not, see <http://www.gnu.org/licenses/>.

Name		Name	Last commit message	Last commit date
Latest commit History 370 Commits
.gitlab/issue_templates		.gitlab/issue_templates
.idea		.idea
.pycharm		.pycharm
art		art
bin		bin
data		data
flatpak @ dd935ef		flatpak @ dd935ef
gwe		gwe
scripts		scripts
.gitignore		.gitignore
.gitmodules		.gitmodules
CHANGELOG.md		CHANGELOG.md
CODE_OF_CONDUCT.md		CODE_OF_CONDUCT.md
CONTRIBUTING.md		CONTRIBUTING.md
COPYING.txt		COPYING.txt
Dockerfile		Dockerfile
README.md		README.md
RELEASING.md		RELEASING.md
build.sh		build.sh
flatpak_run.sh		flatpak_run.sh
meson.build		meson.build
mypy.ini		mypy.ini
pylintrc		pylintrc
requirements.txt		requirements.txt
run.sh		run.sh
shell.nix		shell.nix

License

leinardi/gwe

Folders and files

Latest commit

History

Repository files navigation