homebridge-envisalink

This Homebridge plugin adds an Envisalink panel and its sensors into HomeKit. Alarm Panel can be armed (home/away) or disarmed by using Siri or the HomeKit app of your choice. Sensors can also be used for automations (i.e. turn on light when door opens).

##Installation Example configuration is below. See config.schema.json for more info, including valid values.

 "platforms": [
    {
      "platform": "Envisalink",
      "host": "192.168.0.XXX",
      "deviceType": "DSC",
      "password": "---envisalink password (default is user)---",
      "pin": "---panel pin for disarming---",
      "suppressZoneAccessories": false,
      "suppressClockReset": false,
      "partitions": [
        {
          "name": "Alarm"
        }
      ],
      "zones": [
        {
          "name": "Front Door",
          "type": "door",
          "partition": 1
        },
        {
          "name": "Master Bedroom Door",
          "type": "door",
          "partition": 1
        },
        {
          "name": "Downstairs Windows",
          "type": "window",
          "partition": 1
        },
        {
          "name": "Basement Leak",
          "type": "leak",
          "partition": 1
        },
        {
          "name": "Upstairs Smoke",
          "type": "smoke",
          "partition": 1
        },
        {
          "name": "Living Room Motion",
          "type": "motion",
          "partition": 1
        }
      ],
      "userPrograms": [
        {
          "name": "Basement Smoke",
          "type": "smoke",
          "partition": 1
        }
      ]
    }
  ]

Advanced Config

Disabling Clock Reset

This plugin will update the date/time of your alarm system hourly unless you set "suppressClockReset" to true in the config.

Non-Consecutive Zones

If your system has unused zones, simply include a zoneNumber integer property on each zone you have in the config. Make sure you put the property on each zone.

Ex:

...
"zones": [
  {
    "name": "Front Entry",
    "type": "door",
    "partition": 1,
    "zoneNumber": 1
  },
  {
    "name": "Patio Door",
    "type": "door",
    "partition": 1,
    "zoneNumber": 2
  },
  {
    "name": "Garage Door",
    "type": "door",
    "partition": 1,
    "zoneNumber": 5
  }
]
...

User Programs

If you don't know what they are, you don't need them. Skip this property.

*Note*: Only DSC panels have been tested thus far. If you'd like to provide a Honeywell device for testing, I'd be glad to add support for this device and ship it back to you.

Credits

This plugin leverages Node Alarm Proxy in order to HomeKit/HomeBridge enable the Envisalink device.