Skip to content

Pulsar CI Flaky

Pulsar CI Flaky #1120

#
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements. See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership. The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied. See the License for the
# specific language governing permissions and limitations
# under the License.
#
name: Pulsar CI Flaky
on:
pull_request:
branches:
- master
- branch-*
- pulsar-*
schedule:
# scheduled job with JDK 17
- cron: '0 12 * * *'
# scheduled job with JDK 21
# if cron expression is changed, make sure to update the expression in jdk_major_version step in preconditions job
- cron: '0 6 * * *'
workflow_dispatch:
inputs:
collect_coverage:
description: 'Collect test coverage and upload to Codecov'
required: true
type: boolean
default: true
jdk_major_version:
description: 'JDK major version to use for the build'
required: true
type: choice
options:
- '17'
- '21'
default: '17'
trace_test_resource_cleanup:
description: 'Collect thread & heap information before exiting a test JVM. When set to "on", thread dump and heap histogram will be collected. When set to "full", a heap dump will also be collected.'
required: true
type: choice
options:
- 'off'
- 'on'
- 'full'
default: 'off'
thread_leak_detector_wait_millis:
description: 'Duration in ms to wait for threads to exit in thread leak detection between test classes. It is necessary to wait for threads to complete before they are determined to be leaked threads.'
required: true
type: number
default: 10000
concurrency:
group: ${{ github.workflow }}-${{ github.ref }}-${{ github.event_name }}${{ github.event_name == 'workflow_dispatch' && github.event.inputs.jdk_major_version || '' }}
cancel-in-progress: true
env:
MAVEN_OPTS: -Xss1500k -Xmx1500m -Daether.connector.http.reuseConnections=false -Daether.connector.requestTimeout=60000 -Dhttp.keepAlive=false -Dmaven.wagon.http.pool=false -Dmaven.wagon.http.retryHandler.class=standard -Dmaven.wagon.http.retryHandler.count=3 -Dmaven.wagon.http.retryHandler.requestSentEnabled=true -Dmaven.wagon.http.serviceUnavailableRetryStrategy.class=standard -Dmaven.wagon.rto=60000
# defines the retention period for the intermediate build artifacts needed for rerunning a failed build job
# it's possible to rerun individual failed jobs when the build artifacts are available
# if the artifacts have already been expired, the complete workflow can be rerun by closing and reopening the PR or by rebasing the PR
ARTIFACT_RETENTION_DAYS: 3
JDK_DISTRIBUTION: corretto
jobs:
preconditions:
name: Preconditions
runs-on: ubuntu-22.04
outputs:
docs_only: ${{ steps.check_changes.outputs.docs_only }}
changed_tests: ${{ steps.changes.outputs.tests_files }}
need_owasp: ${{ steps.changes.outputs.need_owasp }}
collect_coverage: ${{ steps.check_coverage.outputs.collect_coverage }}
jdk_major_version: ${{ steps.jdk_major_version.outputs.jdk_major_version }}
steps:
- name: Cancel scheduled jobs in forks by default
if: ${{ github.repository != 'apache/pulsar' && github.event_name == 'schedule' }}
uses: actions/github-script@v6
with:
script: |
await github.rest.actions.cancelWorkflowRun({owner: context.repo.owner, repo: context.repo.repo, run_id: context.runId});
process.exit(1);
- name: Select JDK major version
id: jdk_major_version
run: |
# use JDK 21 for the scheduled build with cron expression '0 6 * * *'
if [[ "${{ github.event_name == 'schedule' && github.event.schedule == '0 6 * * *' && 'true' || 'false' }}" == "true" ]]; then
echo "jdk_major_version=21" >> $GITHUB_OUTPUT
exit 0
fi
# use JDK 17 for build unless overridden with workflow_dispatch input
echo "jdk_major_version=${{ github.event_name == 'workflow_dispatch' && github.event.inputs.jdk_major_version || '17'}}" >> $GITHUB_OUTPUT
- name: checkout
if: ${{ github.event_name == 'pull_request' }}
uses: actions/checkout@v4
- name: Detect changed files
if: ${{ github.event_name == 'pull_request' }}
id: changes
uses: apache/pulsar-test-infra/paths-filter@master
with:
filters: .github/changes-filter.yaml
list-files: csv
- name: Check changed files
if: ${{ github.event_name == 'pull_request' }}
id: check_changes
run: |
if [[ "${GITHUB_EVENT_NAME}" != "schedule" && "${GITHUB_EVENT_NAME}" != "workflow_dispatch" ]]; then
echo "docs_only=${{ fromJSON(steps.changes.outputs.all_count) == fromJSON(steps.changes.outputs.docs_count) && fromJSON(steps.changes.outputs.docs_count) > 0 }}" >> $GITHUB_OUTPUT
else
echo docs_only=false >> $GITHUB_OUTPUT
fi
- name: Check if coverage should be collected
id: check_coverage
run: |
echo "collect_coverage=${{
(steps.check_changes.outputs.docs_only != 'true' && github.event_name != 'workflow_dispatch'
&& (github.base_ref == 'master' || github.ref_name == 'master'))
|| (github.event_name == 'workflow_dispatch' && github.event.inputs.collect_coverage == 'true')
}}" >> $GITHUB_OUTPUT
- name: Check if the PR has been approved for testing
if: ${{ steps.check_changes.outputs.docs_only != 'true' && github.repository == 'apache/pulsar' && github.event_name == 'pull_request' }}
env:
GITHUB_RUN_ATTEMPT: ${{ github.run_attempt }}
GITHUB_TOKEN: ${{ github.token }}
run: |
build/pulsar_ci_tool.sh check_ready_to_test
build-and-test:
needs: preconditions
name: Flaky tests suite
env:
JOB_NAME: Flaky tests suite
COLLECT_COVERAGE: "${{ needs.preconditions.outputs.collect_coverage }}"
GRADLE_ENTERPRISE_ACCESS_KEY: ${{ secrets.GE_ACCESS_TOKEN }}
CI_JDK_MAJOR_VERSION: ${{ needs.preconditions.outputs.jdk_major_version }}
TRACE_TEST_RESOURCE_CLEANUP: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.trace_test_resource_cleanup || 'off' }}
TRACE_TEST_RESOURCE_CLEANUP_DIR: ${{ github.workspace }}/target/trace-test-resource-cleanup
THREAD_LEAK_DETECTOR_WAIT_MILLIS: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.thread_leak_detector_wait_millis || 10000 }}
THREAD_LEAK_DETECTOR_DIR: ${{ github.workspace }}/target/thread-leak-dumps
runs-on: ubuntu-22.04
timeout-minutes: 100
if: ${{ needs.preconditions.outputs.docs_only != 'true' }}
steps:
- name: checkout
uses: actions/checkout@v4
- name: Tune Runner VM
uses: ./.github/actions/tune-runner-vm
- name: Clean Disk when tracing test resource cleanup
if: ${{ env.TRACE_TEST_RESOURCE_CLEANUP != 'off' }}
uses: ./.github/actions/clean-disk
- name: Setup ssh access to build runner VM
# ssh access is enabled for builds in own forks
if: ${{ github.repository != 'apache/pulsar' && github.event_name == 'pull_request' }}
uses: ./.github/actions/ssh-access
continue-on-error: true
with:
limit-access-to-actor: true
- name: Cache local Maven repository
uses: actions/cache@v4
timeout-minutes: 5
with:
path: |
~/.m2/repository/*/*/*
!~/.m2/repository/org/apache/pulsar
key: ${{ runner.os }}-m2-dependencies-core-modules-${{ hashFiles('**/pom.xml') }}
restore-keys: |
${{ runner.os }}-m2-dependencies-core-modules-
- name: Set up JDK ${{ env.CI_JDK_MAJOR_VERSION }}
uses: actions/setup-java@v4
with:
distribution: ${{ env.JDK_DISTRIBUTION }}
java-version: ${{ env.CI_JDK_MAJOR_VERSION }}
- name: Build core-modules
run: |
mvn -B -T 1C -ntp -Pcore-modules,-main clean install -DskipTests -Dlicense.skip=true -Drat.skip=true
- name: Run unit test group BROKER_FLAKY
run: |
CHANGED_TESTS="${{ needs.preconditions.outputs.tests_files }}" ./build/run_unit_group.sh BROKER_FLAKY
- name: print JVM thread dumps when cancelled
if: cancelled()
run: $GITHUB_WORKSPACE/build/pulsar_ci_tool.sh print_thread_dumps
- name: Aggregates all test reports to ./test-reports and ./surefire-reports directories
if: ${{ always() }}
uses: ./.github/actions/copy-test-reports
- name: Publish Test Report
uses: apache/pulsar-test-infra/action-junit-report@master
if: ${{ always() }}
with:
report_paths: 'test-reports/TEST-*.xml'
annotate_only: 'true'
- name: Report detected thread leaks
if: ${{ always() }}
run: |
if [ -d "$THREAD_LEAK_DETECTOR_DIR" ]; then
cd "$THREAD_LEAK_DETECTOR_DIR"
cat threadleak*.txt | awk '/^Summary:/ {print "::warning::" $0 "\n"; next} {print}'
fi
- name: Create Jacoco reports
if: ${{ needs.preconditions.outputs.collect_coverage == 'true' }}
continue-on-error: true
run: |
$GITHUB_WORKSPACE/build/pulsar_ci_tool.sh create_test_coverage_report
cd $GITHUB_WORKSPACE/target
zip -qr jacoco_test_coverage_report_flaky.zip jacoco_test_coverage_report || true
- name: Upload Jacoco report files to build artifacts
if: ${{ needs.preconditions.outputs.collect_coverage == 'true' }}
uses: actions/upload-artifact@v4
with:
name: Jacoco-coverage-report-flaky
path: target/jacoco_test_coverage_report_flaky.zip
retention-days: 3
if-no-files-found: ignore
- name: Upload to Codecov
if: ${{ needs.preconditions.outputs.collect_coverage == 'true' }}
uses: ./.github/actions/upload-coverage
continue-on-error: true
with:
flags: unittests
- name: Upload Surefire reports
uses: actions/upload-artifact@v4
if: ${{ !success() || env.TRACE_TEST_RESOURCE_CLEANUP != 'off' }}
with:
name: Unit-BROKER_FLAKY-surefire-reports
path: surefire-reports
retention-days: 7
if-no-files-found: ignore
- name: Upload possible heap dump, core dump or crash files
uses: actions/upload-artifact@v4
if: ${{ always() }}
with:
name: Unit-BROKER_FLAKY-dumps
path: |
/tmp/*.hprof
**/hs_err_*.log
**/core.*
${{ env.TRACE_TEST_RESOURCE_CLEANUP_DIR }}/*
${{ env.THREAD_LEAK_DETECTOR_DIR }}/*
retention-days: 7
if-no-files-found: ignore